# | Title | Journal | Year | Citations |
---|
1 | A review of power harvesting using piezoelectric materials (2003–2006) | Smart Materials and Structures | 2007 | 2,157 |
2 | A piezoelectric vibration based generator for wireless electronics | Smart Materials and Structures | 2004 | 1,516 |
3 | Modal identification of output-only systems using frequency domain decomposition | Smart Materials and Structures | 2001 | 1,278 |
4 | Modeling and control of magnetorheological dampers for seismic response reduction | Smart Materials and Structures | 1996 | 1,124 |
5 | An experimentally validated bimorph cantilever model for piezoelectric energy harvesting from base excitations | Smart Materials and Structures | 2009 | 1,075 |
6 | Ionic polymer-metal composites: I. Fundamentals | Smart Materials and Structures | 2001 | 1,049 |
7 | A review of the recent research on vibration energy harvesting via bistable systems | Smart Materials and Structures | 2013 | 1,001 |
8 | Powering MEMS portable devices—a review of non-regenerative and regenerative power supply systems with special emphasis on piezoelectric energy harvesting systems | Smart Materials and Structures | 2008 | 970 |
9 | Ionic polymer-metal composites (IPMCs) as biomimetic sensors, actuators and artificial muscles - a review | Smart Materials and Structures | 1998 | 884 |
10 | A carbon nanotube strain sensor for structural health monitoring | Smart Materials and Structures | 2006 | 862 |
11 | A review of piezoelectric polymers as functional materials for electromechanical transducers | Smart Materials and Structures | 2014 | 734 |
12 | Shape memory polymers and their composites in aerospace applications: a review | Smart Materials and Structures | 2014 | 734 |
13 | A model of the behaviour of magnetorheological materials | Smart Materials and Structures | 1996 | 724 |
14 | Guided wave based structural health monitoring: A review | Smart Materials and Structures | 2016 | 662 |
15 | Auxetic metamaterials and structures: a review | Smart Materials and Structures | 2018 | 657 |
16 | Analysis of power output for piezoelectric energy harvesting systems | Smart Materials and Structures | 2006 | 629 |
17 | Microelectromechanical systems (MEMS): fabrication, design and applications | Smart Materials and Structures | 2001 | 626 |
18 | Damage detection in composite materials using Lamb wave methods | Smart Materials and Structures | 2002 | 599 |
19 | Smart fabric sensors and e-textile technologies: a review | Smart Materials and Structures | 2014 | 597 |
20 | Active health monitoring of an aircraft wing with embedded piezoelectric sensor/actuator network: I. Defect detection, localization and growth monitoring | Smart Materials and Structures | 2007 | 580 |
21 | Ionic polymer–metal composites: IV. Industrial and medical applications | Smart Materials and Structures | 2005 | 573 |
22 | A vibration energy harvesting device with bidirectional resonance frequency tunability | Smart Materials and Structures | 2008 | 545 |
23 | A review of energy harvesting using piezoelectric materials: state-of-the-art a decade later (2008–2018) | Smart Materials and Structures | 2019 | 520 |
24 | Active origami by 4D printing | Smart Materials and Structures | 2014 | 510 |
25 | Ionic polymer metal composites: II. Manufacturing techniques | Smart Materials and Structures | 2003 | 507 |
26 | Micromachined pressure sensors: review and recent developments | Smart Materials and Structures | 1997 | 472 |
27 | A review of stimuli-responsive polymers for smart textile applications | Smart Materials and Structures | 2012 | 467 |
28 | An experimental study of MR dampers for seismic protection | Smart Materials and Structures | 1998 | 465 |
29 | Piezoelectric ultrasonic motors: overview | Smart Materials and Structures | 1998 | 450 |
30 | Damage diagnosis using time series analysis of vibration signals | Smart Materials and Structures | 2001 | 443 |
31 | A state-of-the-art review on magnetorheological elastomer devices | Smart Materials and Structures | 2014 | 438 |
32 | Resonance tuning of piezoelectric vibration energy scavenging generators using compressive axial preload | Smart Materials and Structures | 2006 | 422 |
33 | A synthetic time-reversal imaging method for structural health monitoring | Smart Materials and Structures | 2004 | 421 |
34 | Modeling and analysis of micro piezoelectric power generators for micro-electromechanical-systems applications | Smart Materials and Structures | 2004 | 408 |
35 | Concrete structural health monitoring using embedded piezoceramic transducers | Smart Materials and Structures | 2007 | 407 |
36 | Polymer optical fiber sensors—a review | Smart Materials and Structures | 2011 | 400 |
37 | Detection, localization and characterization of damage in plates with anin situarray of spatially distributed ultrasonic sensors | Smart Materials and Structures | 2008 | 393 |
38 | Thermomechanical properties in a thin film of shape memory polymer of polyurethane series | Smart Materials and Structures | 1996 | 389 |
39 | Vibration energy harvesting by magnetostrictive material | Smart Materials and Structures | 2008 | 387 |
40 | Fiber reinforced shape-memory polymer composite and its application in a deployable hinge | Smart Materials and Structures | 2009 | 373 |
41 | Detection and monitoring of hidden fatigue crack growth using a built-in piezoelectric sensor/actuator network: I. Diagnostics | Smart Materials and Structures | 2004 | 364 |
42 | Carbon fiber reinforced concrete for smart structures capable of non-destructive flaw detection | Smart Materials and Structures | 1993 | 356 |
43 | Influence of the β-phase content and degree of crystallinity on the piezo- and ferroelectric properties of poly(vinylidene fluoride) | Smart Materials and Structures | 2010 | 352 |
44 | Performance of smart piezoceramic patches in health monitoring of a RC bridge | Smart Materials and Structures | 2000 | 339 |
45 | Issues in mathematical modeling of piezoelectric energy harvesters | Smart Materials and Structures | 2008 | 338 |
46 | Ionic polymer–metal composites: III. Modeling and simulation as biomimetic sensors, actuators, transducers, and artificial muscles | Smart Materials and Structures | 2004 | 335 |
47 | Origami-inspired active structures: a synthesis and review | Smart Materials and Structures | 2014 | 332 |
48 | Applications of electro-rheological fluids in vibration control: a survey | Smart Materials and Structures | 1996 | 331 |
49 | Comparative study of damage identification algorithms applied to a bridge: I. Experiment | Smart Materials and Structures | 1998 | 331 |
50 | Development of an adaptive tuned vibration absorber with magnetorheological elastomer | Smart Materials and Structures | 2006 | 326 |