| # | Title | Journal | Year | Citations |
|---|
|
| 1 | A review of power harvesting using piezoelectric materials (2003–2006) | Smart Materials and Structures | 2007 | 2,201 |
| 2 | A piezoelectric vibration based generator for wireless electronics | Smart Materials and Structures | 2004 | 1,542 |
| 3 | Modal identification of output-only systems using frequency domain decomposition | Smart Materials and Structures | 2001 | 1,359 |
| 4 | Modeling and control of magnetorheological dampers for seismic response reduction | Smart Materials and Structures | 1996 | 1,132 |
| 5 | An experimentally validated bimorph cantilever model for piezoelectric energy harvesting from base excitations | Smart Materials and Structures | 2009 | 1,113 |
| 6 | Ionic polymer-metal composites: I. Fundamentals | Smart Materials and Structures | 2001 | 1,063 |
| 7 | A review of the recent research on vibration energy harvesting via bistable systems | Smart Materials and Structures | 2013 | 1,029 |
| 8 | Powering MEMS portable devices—a review of non-regenerative and regenerative power supply systems with special emphasis on piezoelectric energy harvesting systems | Smart Materials and Structures | 2008 | 992 |
| 9 | Ionic polymer-metal composites (IPMCs) as biomimetic sensors, actuators and artificial muscles - a review | Smart Materials and Structures | 1998 | 894 |
| 10 | A carbon nanotube strain sensor for structural health monitoring | Smart Materials and Structures | 2006 | 875 |
| 11 | Shape memory polymers and their composites in aerospace applications: a review | Smart Materials and Structures | 2014 | 780 |
| 12 | A review of piezoelectric polymers as functional materials for electromechanical transducers | Smart Materials and Structures | 2014 | 768 |
| 13 | A model of the behaviour of magnetorheological materials | Smart Materials and Structures | 1996 | 745 |
| 14 | Auxetic metamaterials and structures: a review | Smart Materials and Structures | 2018 | 741 |
| 15 | Guided wave based structural health monitoring: A review | Smart Materials and Structures | 2016 | 732 |
| 16 | Microelectromechanical systems (MEMS): fabrication, design and applications | Smart Materials and Structures | 2001 | 650 |
| 17 | Analysis of power output for piezoelectric energy harvesting systems | Smart Materials and Structures | 2006 | 646 |
| 18 | Smart fabric sensors and e-textile technologies: a review | Smart Materials and Structures | 2014 | 618 |
| 19 | Damage detection in composite materials using Lamb wave methods | Smart Materials and Structures | 2002 | 611 |
| 20 | Active health monitoring of an aircraft wing with embedded piezoelectric sensor/actuator network: I. Defect detection, localization and growth monitoring | Smart Materials and Structures | 2007 | 602 |
| 21 | Ionic polymer–metal composites: IV. Industrial and medical applications | Smart Materials and Structures | 2005 | 577 |
| 22 | A review of energy harvesting using piezoelectric materials: state-of-the-art a decade later (2008–2018) | Smart Materials and Structures | 2019 | 574 |
| 23 | A vibration energy harvesting device with bidirectional resonance frequency tunability | Smart Materials and Structures | 2008 | 559 |
| 24 | Active origami by 4D printing | Smart Materials and Structures | 2014 | 537 |
| 25 | Ionic polymer metal composites: II. Manufacturing techniques | Smart Materials and Structures | 2003 | 510 |
| 26 | A review of stimuli-responsive polymers for smart textile applications | Smart Materials and Structures | 2012 | 484 |
| 27 | Micromachined pressure sensors: review and recent developments | Smart Materials and Structures | 1997 | 477 |
| 28 | An experimental study of MR dampers for seismic protection | Smart Materials and Structures | 1998 | 468 |
| 29 | A state-of-the-art review on magnetorheological elastomer devices | Smart Materials and Structures | 2014 | 461 |
| 30 | Piezoelectric ultrasonic motors: overview | Smart Materials and Structures | 1998 | 456 |
| 31 | Damage diagnosis using time series analysis of vibration signals | Smart Materials and Structures | 2001 | 451 |
| 32 | A synthetic time-reversal imaging method for structural health monitoring | Smart Materials and Structures | 2004 | 434 |
| 33 | Resonance tuning of piezoelectric vibration energy scavenging generators using compressive axial preload | Smart Materials and Structures | 2006 | 428 |
| 34 | Concrete structural health monitoring using embedded piezoceramic transducers | Smart Materials and Structures | 2007 | 422 |
| 35 | Polymer optical fiber sensors—a review | Smart Materials and Structures | 2011 | 416 |
| 36 | Modeling and analysis of micro piezoelectric power generators for micro-electromechanical-systems applications | Smart Materials and Structures | 2004 | 412 |
| 37 | Detection, localization and characterization of damage in plates with anin situarray of spatially distributed ultrasonic sensors | Smart Materials and Structures | 2008 | 409 |
| 38 | Vibration energy harvesting by magnetostrictive material | Smart Materials and Structures | 2008 | 398 |
| 39 | Thermomechanical properties in a thin film of shape memory polymer of polyurethane series | Smart Materials and Structures | 1996 | 395 |
| 40 | Fiber reinforced shape-memory polymer composite and its application in a deployable hinge | Smart Materials and Structures | 2009 | 389 |
| 41 | Influence of the β-phase content and degree of crystallinity on the piezo- and ferroelectric properties of poly(vinylidene fluoride) | Smart Materials and Structures | 2010 | 377 |
| 42 | Carbon fiber reinforced concrete for smart structures capable of non-destructive flaw detection | Smart Materials and Structures | 1993 | 373 |
| 43 | Detection and monitoring of hidden fatigue crack growth using a built-in piezoelectric sensor/actuator network: I. Diagnostics | Smart Materials and Structures | 2004 | 371 |
| 44 | Performance of smart piezoceramic patches in health monitoring of a RC bridge | Smart Materials and Structures | 2000 | 347 |
| 45 | Issues in mathematical modeling of piezoelectric energy harvesters | Smart Materials and Structures | 2008 | 347 |
| 46 | Origami-inspired active structures: a synthesis and review | Smart Materials and Structures | 2014 | 343 |
| 47 | Ionic polymer–metal composites: III. Modeling and simulation as biomimetic sensors, actuators, transducers, and artificial muscles | Smart Materials and Structures | 2004 | 340 |
| 48 | Magnetorheological fluid dampers: a review of parametric modelling | Smart Materials and Structures | 2011 | 339 |
| 49 | Applications of electro-rheological fluids in vibration control: a survey | Smart Materials and Structures | 1996 | 337 |
| 50 | Development of an adaptive tuned vibration absorber with magnetorheological elastomer | Smart Materials and Structures | 2006 | 334 |
