# | Title | Journal | Year | Citations |
---|
1 | Efficient and stable emission of warm-white light from lead-free halide double perovskites | Nature | 2018 | 1,451 |
2 | Fundamentals and advances in magnesium alloy corrosion | Progress in Materials Science | 2017 | 1,321 |
3 | Additive manufacturing of metals: a brief review of the characteristic microstructures and properties of steels, Ti-6Al-4V and high-entropy alloys | Science and Technology of Advanced Materials | 2017 | 660 |
4 | A high-specific-strength and corrosion-resistant magnesium alloy | Nature Materials | 2015 | 561 |
5 | Broadband Nonlinear Photonics in Few‐Layer MXene Ti3C2Tx (T = F, O, or OH) | Laser and Photonics Reviews | 2018 | 550 |
6 | In-plane anisotropic and ultra-low-loss polaritons in a natural van der Waals crystal | Nature | 2018 | 506 |
7 | Ultrasensitive detection of miRNA with an antimonene-based surface plasmon resonance sensor | Nature Communications | 2019 | 475 |
8 | An Alkylated Indacenodithieno[3,2‐b]thiophene‐Based Nonfullerene Acceptor with High Crystallinity Exhibiting Single Junction Solar Cell Efficiencies Greater than 13% with Low Voltage Losses | Advanced Materials | 2018 | 474 |
9 | Rubidium Multication Perovskite with Optimized Bandgap for Perovskite‐Silicon Tandem with over 26% Efficiency | Advanced Energy Materials | 2017 | 443 |
10 | Functionalization of perovskite thin films with moisture-tolerant molecules | Nature Energy | 2016 | 439 |
11 | Topological polaritons and photonic magic angles in twisted α-MoO3 bilayers | Nature | 2020 | 413 |
12 | Scalable Production of a Few-Layer MoS2/WS2 Vertical Heterojunction Array and Its Application for Photodetectors | ACS Nano | 2016 | 362 |
13 | Highly Efficient Blue‐Emitting Bi‐Doped Cs2SnCl6 Perovskite Variant: Photoluminescence Induced by Impurity Doping | Advanced Functional Materials | 2018 | 358 |
14 | Understanding charge transport in lead iodide perovskite thin-film field-effect transistors | Science Advances | 2017 | 354 |
15 | Texture evolution during static recrystallization of cold-rolled magnesium alloys | Acta Materialia | 2016 | 349 |
16 | Producing Bulk Ultrafine-Grained Materials by Severe Plastic Deformation: Ten Years Later | Jom | 2016 | 346 |
17 | Acoustic-optical phonon up-conversion and hot-phonon bottleneck in lead-halide perovskites | Nature Communications | 2017 | 330 |
18 | Precipitation strengthening of aluminum alloys by room-temperature cyclic plasticity | Science | 2019 | 323 |
19 | Phase Segregation Enhanced Ion Movement in Efficient Inorganic CsPbIBr2 Solar Cells | Advanced Energy Materials | 2017 | 318 |
20 | Selective laser melting of a high strength Al Mn Sc alloy: Alloy design and strengthening mechanisms | Acta Materialia | 2019 | 307 |
21 | Corrosion of high entropy alloys | Npj Materials Degradation | 2017 | 302 |
22 | Effect of the Microenvironment on Mesenchymal Stem Cell Paracrine Signaling: Opportunities to Engineer the Therapeutic Effect | Stem Cells and Development | 2017 | 298 |
23 | Two-Dimensional CH3NH3PbI3 Perovskite Nanosheets for Ultrafast Pulsed Fiber Lasers | ACS Applied Materials & Interfaces | 2017 | 296 |
24 | Magnesium extrusion alloys: a review of developments and prospects | International Materials Reviews | 2019 | 295 |
25 | Macroscopic and high-throughput printing of aligned nanostructured polymer semiconductors for MHz large-area electronics | Nature Communications | 2015 | 280 |
26 | The influence of processing parameters on aluminium alloy A357 manufactured by Selective Laser Melting | Materials and Design | 2016 | 269 |
27 | Oriented Quasi‐2D Perovskites for High Performance Optoelectronic Devices | Advanced Materials | 2018 | 268 |
28 | Large plasticity in magnesium mediated by pyramidal dislocations | Science | 2019 | 264 |
29 | Electrochemical exfoliation of graphite and production of functional graphene | Current Opinion in Colloid and Interface Science | 2015 | 262 |
30 | Copper(I) Iodide as Hole‐Conductor in Planar Perovskite Solar Cells: Probing the Origin of J–V Hysteresis | Advanced Functional Materials | 2015 | 260 |
31 | Photonics and optoelectronics of two-dimensional materials beyond graphene | Nanotechnology | 2016 | 259 |
32 | Bio-inks for 3D bioprinting: recent advances and future prospects | Polymer Chemistry | 2017 | 256 |
33 | Nonlinear optical properties and applications of 2D materials: theoretical and experimental aspects | Nanophotonics | 2018 | 254 |
34 | Synthesis, properties, and optical applications of low-dimensional perovskites | Chemical Communications | 2016 | 252 |
35 | Mechanistic investigation of a low-alloy Mg–Ca-based extrusion alloy with high strength–ductility synergy | Acta Materialia | 2020 | 250 |
36 | Columnar to equiaxed transition in Al-Mg(-Sc)-Zr alloys produced by selective laser melting | Scripta Materialia | 2018 | 247 |
37 | Hybrid Graphene–Perovskite Phototransistors with Ultrahigh Responsivity and Gain | Advanced Optical Materials | 2015 | 240 |
38 | Stabilizing the cubic perovskite phase of CsPbI3 nanocrystals by using an alkyl phosphinic acid | Chemical Communications | 2017 | 235 |
39 | Flexible, Printable Soft‐X‐Ray Detectors Based on All‐Inorganic Perovskite Quantum Dots | Advanced Materials | 2019 | 221 |
40 | Wafer-scale two-dimensional semiconductors from printed oxide skin of liquid metals | Nature Communications | 2017 | 219 |
41 | Influence of Backbone Fluorination in Regioregular Poly(3-alkyl-4-fluoro)thiophenes | Journal of the American Chemical Society | 2015 | 211 |
42 | Graphene–Bi2Te3 Heterostructure as Saturable Absorber for Short Pulse Generation | ACS Photonics | 2015 | 208 |
43 | Highly Exfoliated MWNT–rGO Ink-Wrapped Polyurethane Foam for Piezoresistive Pressure Sensor Applications | ACS Applied Materials & Interfaces | 2018 | 208 |
44 | Corrosion of Additively Manufactured Alloys: A Review | Corrosion | 2018 | 206 |
45 | Influence of post heat treatments on anisotropy of mechanical behaviour and microstructure of Hastelloy-X parts produced by selective laser melting | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2016 | 204 |
46 | Ion transport in complex layered graphene-based membranes with tuneable interlayer spacing | Science Advances | 2016 | 203 |
47 | D-A-π-A-D-type Dopant-free Hole Transport Material for Low-Cost, Efficient, and Stable Perovskite Solar Cells | Joule | 2021 | 203 |
48 | Synthesis and Transfer of Large-Area Monolayer WS2 Crystals: Moving Toward the Recyclable Use of Sapphire Substrates | ACS Nano | 2015 | 200 |
49 | Near-Infrared Photodetectors Based on MoTe2 /Graphene Heterostructure with High Responsivity and Flexibility | Small | 2017 | 200 |
50 | Influences of processing parameters on surface roughness of Hastelloy X produced by selective laser melting | Additive Manufacturing | 2017 | 197 |