# | Title | Journal | Year | Citations |
---|
1 | What is going on in magnesium alloys? | Journal of Materials Science and Technology | 2018 | 487 |
2 | H- index and mixed H-An LMI approach to H- index and mixed H- | Automatica | 2007 | 326 |
3 | A review of ultrafast laser materials micromachining | Optics and Laser Technology | 2013 | 315 |
4 | Adaptive asymptotic tracking control of uncertain nonlinear systems with input quantization and actuator faults | Automatica | 2016 | 296 |
5 | Recent developments in rare-earth free wrought magnesium alloys having high strength: A review | Journal of Alloys and Compounds | 2016 | 261 |
6 | Superhydrophobic TiO 2 /polyvinylidene fluoride composite surface with reversible wettability switching and corrosion resistance | Chemical Engineering Journal | 2016 | 196 |
7 | An Automatic Detection System of Lung Nodule Based on Multigroup Patch-Based Deep Learning Network | IEEE Journal of Biomedical and Health Informatics | 2018 | 179 |
8 | Fault diagnosis of nonlinear processes using multiscale KPCA and multiscale KPLS | Chemical Engineering Science | 2011 | 164 |
9 | Networked Synchronization Control of Coupled Dynamic Networks With Time-Varying Delay | IEEE Transactions on Systems, Man, and Cybernetics | 2010 | 148 |
10 | Static Output Feedback Control Synthesis for Linear Systems With Time-Invariant Parametric Uncertainties | IEEE Transactions on Automatic Control | 2007 | 146 |
11 | Effect of processing and heat treatment on behavior of Cu-Cr-Zr alloys to railway contact wire | Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science | 2006 | 144 |
12 | Low-temperature nitriding of 38CrMoAl steel with a nanostructured surface layer induced by surface mechanical attrition treatment | Surface and Coatings Technology | 2008 | 141 |
13 | Perovskite-structured LaCoO3 modified ZnO gas sensor and investigation on its gas sensing mechanism by first principle | Sensors and Actuators B: Chemical | 2021 | 138 |
14 | Control Synthesis of Continuous-Time T-S Fuzzy Systems With Local Nonlinear Models | IEEE Transactions on Systems, Man, and Cybernetics | 2009 | 136 |
15 | Nonlinear multivariable adaptive control using multiple models and neural networks | Automatica | 2007 | 126 |
16 | A hybrid genetic algorithm approach based on differential evolution for economic dispatch with valve-point effect | International Journal of Electrical Power and Energy Systems | 2008 | 126 |
17 | Enhancing mechanical properties of Mg–Sn alloys by combining addition of Ca and Zn | Materials and Design | 2015 | 118 |
18 | Hybrid genetic algorithm for economic dispatch with valve-point effect | Electric Power Systems Research | 2008 | 116 |
19 | Robust Stability Analysis for Interval Cohen–Grossberg Neural Networks With Unknown Time-Varying Delays | IEEE Transactions on Neural Networks | 2008 | 112 |
20 | Improving intergranular corrosion resistance in a nickel-free and manganese-bearing high-nitrogen austenitic stainless steel through grain boundary character distribution optimization | Corrosion Science | 2016 | 99 |
21 | Microstructures, mechanical properties and corrosion behaviors of Mg–Y–Zn–Zr alloys with specific Y/Zn mole ratios | Journal of Alloys and Compounds | 2015 | 95 |
22 | The quasicrystal of Mg–Zn–Y on discharge and electrochemical behaviors as the anode for Mg-air battery | Journal of Power Sources | 2020 | 95 |
23 | Output Feedback Fuzzy Controller Design With Local Nonlinear Feedback Laws for Discrete-Time Nonlinear Systems | IEEE Transactions on Systems, Man, and Cybernetics | 2010 | 94 |
24 | Sandpaper as template for a robust superhydrophobic surface with self-cleaning and anti-snow/icing performances | Journal of Colloid and Interface Science | 2019 | 94 |
25 | Rough Structure of Electrodeposition as a Template for an Ultrarobust Self-Cleaning Surface | ACS Applied Materials & Interfaces | 2017 | 93 |
26 | Construction of N, P Co‐Doped Carbon Frames Anchored with Fe Single Atoms and Fe2P Nanoparticles as a Robust Coupling Catalyst for Electrocatalytic Oxygen Reduction | Advanced Materials | 2022 | 93 |
27 | Effects of low-frequency electromagnetic field on microstructures and macrosegregation of continuous casting 7075 aluminum alloy | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2003 | 92 |
28 | Effect of low-frequency electromagnetic casting on the castability, microstructure, and tensile properties of direct-chill cast Al-Zn-Mg-Cu alloy | Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science | 2004 | 89 |
29 | Robust Adaptive Fault-tolerant Compensation Control with Actuator Failures and Bounded Disturbances | Zidonghua Xuebao/Acta Automatica Sinica | 2009 | 88 |
30 | Active Learning With Sampling by Uncertainty and Density for Data Annotations | IEEE Transactions on Audio Speech and Language Processing | 2010 | 88 |
31 | Fault Detection and Diagnosis of Nonlinear Processes Using Improved Kernel Independent Component Analysis (KICA) and Support Vector Machine (SVM) | Industrial & Engineering Chemistry Research | 2008 | 85 |
32 | Optimization of dynamic economic dispatch with valve-point effect using chaotic sequence based differential evolution algorithms | Energy Conversion and Management | 2011 | 85 |
33 | Effects of phase composition and content on the microstructures and mechanical properties of high strength Mg–Y–Zn–Zr alloys | Materials and Design | 2015 | 85 |
34 | Deformation and fracture behaviors of AZ31B Mg alloy at elevated temperature under uniaxial compression | Journal of Alloys and Compounds | 2019 | 84 |
35 | Comparative study on microstructure and mechanical properties of a C-Mn-Si steel treated by quenching and partitioning (Q&P) processes after a full and intercritical austenitization | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2017 | 83 |
36 | Preparation and mechanical property of a novel 3D porous magnesium scaffold for bone tissue engineering | Materials Science and Engineering C | 2014 | 81 |
37 | Fault detection of non-Gaussian processes based on modified independent component analysis | Chemical Engineering Science | 2010 | 80 |
38 | Improving the corrosion resistance of MgZn1.2Gd Zr0.18 (x = 0, 0.8, 1.4, 2.0) alloys via Gd additions | Corrosion Science | 2020 | 80 |
39 | Detection of four alcohol homologue gases by ZnO gas sensor in dynamic interval temperature modulation mode | Sensors and Actuators B: Chemical | 2022 | 76 |
40 | Experimental analysis of wet mill load based on vibration signals of laboratory-scale ball mill shell | Minerals Engineering | 2010 | 75 |
41 | The evolution of bainite and mechanical properties of direct laser deposition 12CrNi2 alloy steel at different laser power | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2019 | 74 |
42 | Coupled modeling of electromagnetic field, fluid flow, heat transfer and solidification during low frequency electromagnetic casting of 7XXX aluminum alloys | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2007 | 72 |
43 | Superplasticity, dynamic grain growth and deformation mechanism in ultra-light two-phase magnesium–lithium alloys | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2010 | 72 |
44 | Complex process quality prediction using modified kernel partial least squares | Chemical Engineering Science | 2010 | 72 |
45 | Dual-frequency ultrasonic treatment on microstructure and mechanical properties of ZK60 magnesium alloy | Ultrasonics Sonochemistry | 2018 | 72 |
46 | Breaking the trade-off relation of strength and electrical conductivity in pure Al wire by controlling texture and grain boundary | Journal of Alloys and Compounds | 2018 | 72 |
47 | A comprehensive review of the development of magnesium anodes for primary batteries | Journal of Materials Chemistry A | 2021 | 72 |
48 | An analysis of strategies for adopting blockchain technology in the fresh product supply chain | International Journal of Production Research | 2023 | 71 |
49 | Highly Thermally Conducting Polymer-Based Films with Magnetic Field-Assisted Vertically Aligned Hexagonal Boron Nitride for Flexible Electronic Encapsulation | ACS Applied Materials & Interfaces | 2019 | 70 |
50 | Recovery and regeneration of lithium cobalt oxide from spent lithium-ion batteries through a low-temperature ammonium sulfate roasting approach | Journal of Power Sources | 2020 | 70 |