# | Title | Journal | Year | Citations |
---|
1 | A fractal model for predicting the effective thermal conductivity of liquid with suspension of nanoparticles | International Journal of Heat and Mass Transfer | 2003 | 700 |
2 | An overview of characteristics of municipal solid waste fuel in China: Physical, chemical composition and heating value | Renewable and Sustainable Energy Reviews | 2014 | 402 |
3 | A simple method, the -history method, of determining the heat of fusion, specific heat and thermal conductivity of phase-change materials | Measurement Science and Technology | 1999 | 385 |
4 | Synthesis, Experimental Studies, and Analysis of a New Calcium-Based Carbon Dioxide Absorbent | Energy & Fuels | 2005 | 342 |
5 | Numerical and experimental investigation of two phase flow during boiling in a coiled tube | International Journal of Heat and Mass Transfer | 2008 | 283 |
6 | Effect of Preparation Temperature on Cyclic CO2Capture and Multiple Carbonation−Calcination Cycles for a New Ca-Based CO2Sorbent | Industrial & Engineering Chemistry Research | 2006 | 281 |
7 | Fine particulate formation and ash deposition during pulverized coal combustion of high-sodium lignite in a down-fired furnace | Fuel | 2015 | 261 |
8 | Flame aerosol synthesis of nanostructured materials and functional devices: Processing, modeling, and diagnostics | Progress in Energy and Combustion Science | 2016 | 249 |
9 | A two-stage stochastic programming model for the optimal design of distributed energy systems | Applied Energy | 2013 | 248 |
10 | Dynamics of attached turbulent cavitating flows | Progress in Aerospace Sciences | 2001 | 247 |
11 | Application of nanoparticles in domestic refrigerators | Applied Thermal Engineering | 2008 | 247 |
12 | Coal combustion and its pollution control in China | Energy | 2010 | 239 |
13 | Effects of thermal properties and geometrical dimensions on skin burn injuries | Burns | 2002 | 234 |
14 | Comparison of random forest, artificial neural networks and support vector machine for intelligent diagnosis of rotating machinery | Transactions of the Institute of Measurement and Control | 2018 | 225 |
15 | Adhesive particulate flow: The discrete-element method and its application in energy and environmental engineering | Progress in Energy and Combustion Science | 2011 | 211 |
16 | Thermodynamic analysis and performance optimization of an Organic Rankine Cycle (ORC) waste heat recovery system for marine diesel engines | Energy | 2015 | 206 |
17 | Thermal–hydraulic performance of small scale micro-channel and porous-media heat-exchangers | International Journal of Heat and Mass Transfer | 2001 | 199 |
18 | Particular characteristics of transcritical CO2 refrigeration cycle with an ejector | Applied Thermal Engineering | 2007 | 192 |
19 | Laser-induced breakdown spectroscopy in China | Frontiers of Physics | 2014 | 185 |
20 | Numerical study of a novel counter-flow heat and mass exchanger for dew point evaporative cooling | Applied Thermal Engineering | 2008 | 184 |
21 | Life cycle assessment of grid-connected photovoltaic power generation from crystalline silicon solar modules in China | Applied Energy | 2016 | 181 |
22 | Using fuzzy theory and information entropy for water quality assessment in Three Gorges region, China | Expert Systems With Applications | 2010 | 179 |
23 | Optimal design and techno-economic analysis of a solar-wind-biomass off-grid hybrid power system for remote rural electrification: A case study of west China | Energy | 2020 | 174 |
24 | Numerical investigation of forced convection heat transfer in porous media using a thermal non-equilibrium model | International Journal of Heat and Fluid Flow | 2001 | 164 |
25 | Clean Coal Technologies in China: Current Status and Future Perspectives | Engineering | 2016 | 159 |
26 | Fundamentals of electro- and thermochemistry in the anode of solid-oxide fuel cells with hydrocarbon and syngas fuels | Progress in Energy and Combustion Science | 2014 | 158 |
27 | From a CFB reactor to a CFB boiler – The review of R&D progress of CFB coal combustion technology in China | Powder Technology | 2017 | 158 |
28 | The pyrolysis simulation of five biomass species by hemi-cellulose, cellulose and lignin based on thermogravimetric curves | Thermochimica Acta | 2013 | 156 |
29 | An engineering approach to the optimal design of distributed energy systems in China | Applied Thermal Engineering | 2013 | 156 |
30 | Fabrication and anti-frosting performance of super hydrophobic coating based on modified nano-sized calcium carbonate and ordinary polyacrylate | Applied Surface Science | 2007 | 148 |
31 | A review on fatigue damage mechanism in hydro turbines | Renewable and Sustainable Energy Reviews | 2016 | 143 |
32 | Categorization and analysis of heat sources for organic Rankine cycle systems | Renewable and Sustainable Energy Reviews | 2016 | 142 |
33 | Experimental and numerical investigation of convection heat transfer of CO2 at supercritical pressures in a vertical tube at low Reynolds numbers | International Journal of Thermal Sciences | 2008 | 140 |
34 | Experimental research on convection heat transfer in sintered porous plate channels | International Journal of Heat and Mass Transfer | 2004 | 139 |
35 | China’s solar photovoltaic industry development: The status quo, problems and approaches | Applied Energy | 2014 | 139 |
36 | Pressure fluctuations in the vaneless space of High-head pump-turbines—A review | Renewable and Sustainable Energy Reviews | 2015 | 135 |
37 | An integrated thermal and mechanical investigation of molten-salt thermocline energy storage | Applied Energy | 2011 | 134 |
38 | Convection heat transfer of CO2 at supercritical pressures in a vertical mini tube at relatively low reynolds numbers | Experimental Thermal and Fluid Science | 2008 | 132 |
39 | China’s solar photovoltaic policy: An analysis based on policy instruments | Applied Energy | 2014 | 132 |
40 | A computational study of convection heat transfer to CO2 at supercritical pressures in a vertical mini tube | International Journal of Thermal Sciences | 2005 | 129 |
41 | Effects of surface wettability on nucleate pool boiling heat transfer for surfactant solutions | International Journal of Heat and Mass Transfer | 2002 | 128 |
42 | Gradient theory modeling of surface tension for pure fluids and binary mixtures | Fluid Phase Equilibria | 2007 | 127 |
43 | Parametric analysis of a dual loop Organic Rankine Cycle (ORC) system for engine waste heat recovery | Energy Conversion and Management | 2015 | 126 |
44 | Synthetic fuel production by indirect coal liquefaction | Energy for Sustainable Development | 2003 | 124 |
45 | S-shaped characteristics on the performance curves of pump-turbines in turbine mode – A review | Renewable and Sustainable Energy Reviews | 2016 | 124 |
46 | A review of rotating stall in reversible pump turbine | Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science | 2017 | 124 |
47 | A supply chain based assessment of water issues in the coal industry in China | Energy Policy | 2012 | 122 |
48 | Performance analysis of a dual-loop organic Rankine cycle (ORC) system with wet steam expansion for engine waste heat recovery | Applied Energy | 2015 | 122 |
49 | Experimental and numerical investigation of convection heat transfer of CO2 at supercritical pressures in a vertical mini-tube | International Journal of Heat and Mass Transfer | 2008 | 121 |
50 | The transition of heterogeneous–homogeneous ignitions of dispersed coal particle streams | Combustion and Flame | 2014 | 121 |