# | Title | Journal | Year | Citations |
---|
1 | A hexagonal close-packed high-entropy alloy: The effect of entropy | Materials and Design | 2016 | 322 |
2 | Guidelines in predicting phase formation of high-entropy alloys | MRS Communications | 2014 | 275 |
3 | NbTaV-(Ti,W) refractory high-entropy alloys: Experiments and modeling | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2016 | 229 |
4 | Dynamic response of sandwich structures with graded auxetic honeycomb cores under blast loading | Composites Part B: Engineering | 2016 | 193 |
5 | Electrochemical DNA Biosensor Based on a Tetrahedral Nanostructure Probe for the Detection of Avian Influenza A (H7N9) Virus | ACS Applied Materials & Interfaces | 2015 | 169 |
6 | Microstructure and wear properties of nitrided AlCoCrFeNi high-entropy alloy | Materials Chemistry and Physics | 2018 | 160 |
7 | Superior high tensile elongation of a single-crystal CoCrFeNiAl0.3 high-entropy alloy by Bridgman solidification | Intermetallics | 2014 | 151 |
8 | Experiments on curved sandwich panels under blast loading | International Journal of Impact Engineering | 2010 | 116 |
9 | Dynamic behavior of aluminum honeycomb sandwich panels under air blast: Experiment and numerical analysis | Composite Structures | 2014 | 116 |
10 | Large deformation of an auxetic structure in tension: Experiments and finite element analysis | Composite Structures | 2018 | 111 |
11 | Dynamic crushing behavior of 3D closed-cell foams based on Voronoi random model | Materials & Design | 2010 | 106 |
12 | MoNbTaV Medium-Entropy Alloy | Entropy | 2016 | 106 |
13 | Sandwich panels with layered graded aluminum honeycomb cores under blast loading | Composite Structures | 2017 | 103 |
14 | Plastic Deformation, Failure and Energy Absorption of Sandwich Structures with Metallic Cellular Cores | International Journal of Protective Structures | 2010 | 99 |
15 | Strengthening in Al0.25CoCrFeNi high-entropy alloys by cold rolling | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2017 | 99 |
16 | The dynamic response of sandwich beams with open-cell metal foam cores | Composites Part B: Engineering | 2011 | 98 |
17 | Dynamic response of sandwich spherical shell with graded metallic foam cores subjected to blast loading | Composites Part A: Applied Science and Manufacturing | 2014 | 84 |
18 | Dynamic response of functionally graded cellular materials based on the Voronoi model | Composites Part B: Engineering | 2016 | 84 |
19 | Damping behavior of AlxCoCrFeNi high-entropy alloys by a dynamic mechanical analyzer | Journal of Alloys and Compounds | 2014 | 82 |
20 | Tribological Properties of AlCrCuFeNi2 High-Entropy Alloy in Different Conditions | Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science | 2016 | 80 |
21 | Dynamic response of cylindrical sandwich shells with metallic foam cores under blast loading—Numerical simulations | Composite Structures | 2013 | 78 |
22 | Tensile behavior of an auxetic structure: Analytical modeling and finite element analysis | International Journal of Mechanical Sciences | 2018 | 78 |
23 | Failure behaviors of reinforced concrete beams subjected to high impact loading | Engineering Failure Analysis | 2015 | 76 |
24 | Strain rate effects on the dynamic mechanical properties of the AlCrCuFeNi2 high-entropy alloy | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2016 | 75 |
25 | 3D meso-scale modeling of reinforcement concrete with high volume fraction of randomly distributed aggregates | Construction and Building Materials | 2018 | 75 |
26 | Axial-impact buckling modes and energy absorption properties of thin-walled corrugated tubes with sinusoidal patterns | Thin-Walled Structures | 2015 | 71 |
27 | Microstructural features and tensile behaviors of the Al0.5CrCuFeNi2 high-entropy alloys by cold rolling and subsequent annealing | Materials and Design | 2015 | 68 |
28 | Compressive behavior of closed-cell aluminum alloy foams at medium strain rates | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2011 | 65 |
29 | On crushing response of the three-dimensional closed-cell foam based on Voronoi model | Mechanics of Materials | 2014 | 65 |
30 | Experimental and theoretical investigations on lateral crushing of aluminum foam-filled circular tubes | Composite Structures | 2017 | 65 |
31 | The structural response of clamped sandwich beams subjected to impact loading | Composite Structures | 2011 | 64 |
32 | A comparative study of the corrosion performance of titanium (Ti), titanium nitride (TiN), titanium dioxide (TiO2) and nitrogen-doped titanium oxides (N–TiO2), as coatings for biomedical applications | Ceramics International | 2015 | 63 |
33 | Experimental and numerical study of sandwich beams with layered-gradient foam cores under low-velocity impact | Thin-Walled Structures | 2019 | 60 |
34 | An experimental study of the dynamic response of cylindrical sandwich shells with metallic foam cores subjected to blast loading | International Journal of Impact Engineering | 2014 | 57 |
35 | Microstructure, corrosion and tribological and antibacterial properties of Ti–Cu coated stainless steel | Journal of the Mechanical Behavior of Biomedical Materials | 2015 | 57 |
36 | The dynamic response of sandwich panels with cellular metal cores to localized impulsive loading | Composites Part B: Engineering | 2016 | 54 |
37 | Energy absorption and failure mechanism of metallic cylindrical sandwich shells under impact loading | Materials & Design | 2013 | 53 |
38 | Plastic Deformation of Al0.3CoCrFeNi and AlCoCrFeNi High-Entropy Alloys Under Nanoindentation | Journal of Materials Engineering and Performance | 2015 | 53 |
39 | Effects of experimental variables on PMMA nano-indentation measurements | Polymer Testing | 2015 | 52 |
40 | Dynamic crushing behavior of random and functionally graded metal hollow sphere foams | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2013 | 51 |
41 | Finite element simulation of metallic cylindrical sandwich shells with graded aluminum tubular cores subjected to internal blast loading | International Journal of Mechanical Sciences | 2015 | 48 |
42 | Blast response of gradient honeycomb sandwich panels with basalt fiber metal laminates as skins | International Journal of Impact Engineering | 2019 | 48 |
43 | Uniaxial and biaxial failure behaviors of aluminum alloy foams | Composites Part B: Engineering | 2014 | 45 |
44 | Perforation resistance of sandwich panels with layered gradient metallic foam cores | Composite Structures | 2017 | 45 |
45 | Experimental study on the effects of specimen in-plane size on the mechanical behavior of aluminum hexagonal honeycombs | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2015 | 44 |
46 | Sample size effect on the mechanical behavior of aluminum foam | International Journal of Mechanical Sciences | 2019 | 44 |
47 | Compressive strain rate dependence and constitutive modeling of closed-cell aluminum foams with various relative densities | Journal of Materials Science | 2018 | 43 |
48 | Mechanical properties of intermetallic compounds at the Sn–3.0Ag–0.5Cu/Cu joint interface using nanoindentation | Materials and Design | 2015 | 42 |
49 | Strain rate sensitivity of Sn–3.0Ag–0.5Cu solder investigated by nanoindentation | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2014 | 41 |
50 | Analytical model of thin-walled corrugated tubes with sinusoidal patterns under axial impacting | International Journal of Mechanical Sciences | 2017 | 39 |