| # | Title | Journal | Year | Citations |
|---|
| 1 | Efficient FeCoNiCuPd thin-film electrocatalyst for alkaline oxygen and hydrogen evolution reactions | Applied Catalysis B: Environmental | 2022 | 107 |
| 2 | High entropy alloy/C nanoparticles derived from polymetallic MOF as promising electrocatalysts for alkaline oxygen evolution reaction | Chemical Engineering Journal | 2022 | 84 |
| 3 | Development of the theoretical model for the optimal design of surface texturing on cylinder liner | Tribology International | 2012 | 70 |
| 4 | An optimum design model for textured surface with elliptical-shape dimples under hydrodynamic lubrication | Tribology International | 2011 | 68 |
| 5 | Recent progress on high-entropy materials for electrocatalytic water splitting applications | Tungsten | 2021 | 60 |
| 6 | Numerical analysis on a new pump-out hydrodynamic mechanical seal | Tribology International | 2017 | 31 |
| 7 | The comprehensive effect of surface texture and roughness under hydrodynamic and mixed lubrication conditions | Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology | 2017 | 25 |
| 8 | Surface Detection of Solid Wood Defects Based on SSD Improved with ResNet | Forests | 2021 | 21 |
| 9 | Damage formation mechanisms of sintered silicon carbide during single-diamond grinding | Ceramics International | 2021 | 20 |
| 10 | A leakage channel model for sealing interface of mechanical face seals based on percolation theory | Tribology International | 2018 | 19 |
| 11 | Microstructure, tensile properties and heat-resistant properties of selective laser melted AlMgScZr alloy under long-term aging treatment | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2022 | 17 |
| 12 | A strategy to improve the performance of TiO2 nanotube array film photocatalysts by magnetron-sputtered amorphous BiFeO3 | Vacuum | 2022 | 12 |
| 13 | On the optimum dimple depth-over-diameter ratio for textured surfaces | Advances in Mechanical Engineering | 2017 | 10 |
| 14 | Controlled Self‐Assembly of Hollow Core‐Shell FeMn/CoNi Prussian Blue Analogs with Boosted Electrocatalytic Activity | Small | 2022 | 10 |
| 15 | Plastic Deformation Behavior of Metal Materials: A Review of Constitutive Models | Metals | 2022 | 9 |
| 16 | The influence of cutting parameters on micro-topography of frequency features extracted from the machined KH2PO4 surfaces | Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture | 2020 | 8 |
| 17 | Air bubble removal: Wettability contrast enabled microfluidic interconnects | Sensors and Actuators B: Chemical | 2022 | 8 |
| 18 | Identifying candidate genes for wood formation in poplar based on microarray network analysis and graph theory | Tree Genetics and Genomes | 2016 | 7 |
| 19 | The Synthesis and Tribological Properties of Carbonized Polydopamine/Ag Composite Films | Journal of Materials Engineering and Performance | 2019 | 7 |
| 20 | Mechanical and tribological properties of B-C-N coatings sliding against different wood balls | Science and Engineering of Composite Materials | 2019 | 6 |
| 21 | The Study on Forming Property at High Temperature and Processing Map of 2219 Aluminum Alloy | Metals | 2021 | 6 |
| 22 | A leaf-level spectral library to support high-throughput plant phenotyping: predictive accuracy and model transfer | Journal of Experimental Botany | 2023 | 6 |
| 23 | Tribological properties of boron carbonitride coatings sliding against different wood (acerbic, beech, and lauan) balls | Advanced Composites Letters | 2019 | 5 |
| 24 | Study on the extraction and reconstruction of arbitrary frequency topography from precision machined surfaces | Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture | 2019 | 5 |
| 25 | Forming limit prediction of AA7075-T6 sheet based on ductile fracture criterion and the error analysis of parameters calibration | International Journal of Material Forming | 2021 | 5 |
| 26 | A Sawn Timber Tree Species Recognition Method Based on AM-SPPResNet | Sensors | 2021 | 5 |
| 27 | Deformation Behavior and Constitutive Model of 34CrNi3Mo during Thermo-Mechanical Deformation Process | Materials | 2022 | 5 |
| 28 | Analysis of topology properties in different tissues of poplar based on gene co-expression networks | Tree Genetics and Genomes | 2020 | 4 |
| 29 | Optimization of process parameters, microstructure, and thermal conductivity properties of Ti-coated diamond/copper composites prepared by spark plasma sintering | Journal of Materials Science: Materials in Electronics | 2021 | 4 |
| 30 | Defect Removal and Rearrangement of Wood Board Based on Genetic Algorithm | Forests | 2022 | 4 |
| 31 | Temperature-Dependent Photoluminescence of CdS/ZnS Core/Shell Quantum Dots for Temperature Sensors | Sensors | 2022 | 4 |
| 32 | Investigation on Performance of Mechanical Seal with Varying Dimple Depth Along the Radial Face | Recent Patents on Mechanical Engineering | 2018 | 3 |
| 33 | The mechanical analysis of flexible die drawing for spherical parts based on weight function | International Journal of Advanced Manufacturing Technology | 2019 | 3 |
| 34 | Detection System for U-Shaped Bellows Convolution Pitches Based on a Laser Line Scanner | Sensors | 2020 | 3 |
| 35 | Structural Optimization and Heat Transfer Performance Analysis of a Cone-Column Combined Heat Sink | Journal of Heat Transfer | 2020 | 3 |
| 36 | High Speed Cutting Characteristics and Force Measurement Experimental Platform of Wood Plastic Composites | Key Engineering Materials | 0 | 2 |
| 37 | Modeling of the cupping of two-layer laminated densified wood products subjected to moisture and temperature fluctuations: model development | Wood Science and Technology | 2016 | 2 |
| 38 | Dynamic modeling and simulation of trailer with compliance steering system | MATEC Web of Conferences | 2017 | 2 |
| 39 | Integrated Influence of Sliding Velocity, Outlet Pressure, and Seal Clearance on Optimum Dimple Area Density for Mechanical Seal | IEEE Access | 2018 | 2 |
| 40 | Modeling of the cupping of two-layer laminated densified wood products subjected to moisture and temperature fluctuations: model application | Wood Science and Technology | 2016 | 1 |
| 41 | Tribological properties of carbonized polydopamine/rGO composite coatings | Industrial Lubrication and Tribology | 2019 | 1 |
| 42 | Modelling and simulation of strip running deviation in continuous annealing process | Ironmaking and Steelmaking | 2020 | 1 |
| 43 | Finite element analysis of the vertical roller mill based on ANSYS Workbench | International Journal of Engineering Systems Modelling and Simulation | 2019 | 1 |
| 44 | The Image Segmentation of Osmanthus fragrans Based on Optimization Algorithms | | 2022 | 1 |
| 45 | Corrosion Assessment of Passivation Film Generated on Solder Surface in Artificial Sweat Solution | Materials Today Communications | 2022 | 1 |
| 46 | Controllable Preparation of Ag-SiO2 Composite Nanoparticles and Their Applications in Fluorescence Enhancement | Materials | 2023 | 1 |
| 47 | Heat transfer enhancement by diamond nanofluid in gravity heat pipe for waste heat recovery | Functional Diamond | 2022 | 1 |
| 48 | Micro powder injection molding of boron carbide components with SiC-Al2O3-Y2O3 sintering additives | Chinese Journal of Aeronautics | 2020 | 0 |
| 49 | Finite element analysis of the vertical roller mill based on ANSYS Workbench | International Journal of Engineering Systems Modelling and Simulation | 2019 | 0 |
| 50 | Color classification of solid wood floor based on LGBM | | 2021 | 0 |
