# | Title | Journal | Year | Citations |
---|
1 | Green synthesis of silver nanoparticles using keratinase obtained from a strain of Bacillus safensis LAU 13 | International Nano Letters | 2015 | 146 |
2 | Biogenic synthesis of silver nanoparticles using a pod extract ofCola nitida: Antibacterial and antioxidant activities and application as a paint additive | Journal of Taibah University for Science | 2016 | 134 |
3 | Cocoa pod husk extract-mediated biosynthesis of silver nanoparticles: its antimicrobial, antioxidant and larvicidal activities | Journal of Nanostructure in Chemistry | 2016 | 121 |
4 | Cobweb as novel biomaterial for the green and eco-friendly synthesis of silver nanoparticles | Applied Nanoscience (Switzerland) | 2016 | 88 |
5 | Fungal xylanases‐mediated synthesis of silver nanoparticles for catalytic and biomedical applications | IET Nanobiotechnology | 2018 | 82 |
6 | Effect of ethanol–palm kernel oil ratio on alkali-catalyzed biodiesel yield | Fuel | 2008 | 79 |
7 | Biomedical Applications of Cocoa Bean Extract-Mediated Silver Nanoparticles as Antimicrobial, Larvicidal and Anticoagulant Agents | Journal of Cluster Science | 2017 | 71 |
8 | Cola nitida-Mediated Biogenic Synthesis of Silver Nanoparticles Using Seed and Seed Shell Extracts and Evaluation of Antibacterial Activities | BioNanoScience | 2015 | 65 |
9 | Drying characteristics of yam slices (Dioscorea rotundata) in a convective hot air dryer: application of ANFIS in the prediction of drying kinetics | Heliyon | 2020 | 52 |
10 | Ranking maintenance strategies for sustainable maintenance plan in manufacturing systems using fuzzy axiomatic design principle and fuzzy-TOPSIS | Journal of Manufacturing Technology Management | 2017 | 42 |
11 | Mass transfer by free and forced convection from single spherical liquid drops | International Journal of Heat and Mass Transfer | 2002 | 39 |
12 | Chemical composition of bio-oils produced by fast pyrolysis of two energy biomass | Biofuels | 2018 | 33 |
13 | Investigation of physicochemical characteristics of selected lignocellulose biomass | Scientific Reports | 2022 | 27 |
14 | Parametric study of an ethanol–water distillation column with direct vapour recompression heat pump | Energy for Sustainable Development | 2009 | 24 |
15 | Safety evaluation of green synthesizedCola nitidapod, seed and seed shell extract-mediated silver nanoparticles (AgNPs) using anAllium cepaassay | Journal of Taibah University for Science | 2017 | 21 |
16 | Cytogenotoxicity potentials of cocoa pod and bean-mediated green synthesized silver nanoparticles on Allium cepa cells | Caryologia | 2017 | 19 |
17 | Energy requirements for palm‐kernel oil processing operations | Nutrition and Food Science | 2004 | 17 |
18 | BIOFUEL PRODUCTION BY PYROLYSIS OF CASSAVA PEEL IN A FIXED BED REACTOR | International Journal of Energy for A Clean Environment | 2016 | 15 |
19 | Mechanical Properties and Electrical Conductivity of Poly(methyl methacrylate)/Multi-walled Carbon Nanotubes Composites | Iranian Journal of Science and Technology, Transaction A: Science | 2020 | 15 |
20 | Hot air convective drying of hog plum fruit (Spondias mombin): effects of physical and edible-oil-aided chemical pretreatments on drying and quality characteristics | Heliyon | 2021 | 15 |
21 | Towards setting a sustainable manufacturing safety programme in Nigeria | Disaster Prevention and Management | 2009 | 14 |
22 | Numerical Analysis of the Effects of Selected Geometrical Parameters and Fluid Properties on MHD Natural Convection Flow in an Inclined Elliptic Porous Enclosure with Localized Heating | Heat Transfer - Asian Research | 2017 | 14 |
23 | A multi-hierarchical framework for ranking maintenance sustainability strategies using PROMETHEE and fuzzy entropy methods | Journal of Building Pathology and Rehabilitation | 2017 | 13 |
24 | Quality of optimized biogas yields from co-digestion of cattle dung with fresh mass of sunflower leaves, pawpaw and potato peels | Cogent Engineering | 2018 | 13 |
25 | Antidiabetic properties of phytosynthesized gold nanoparticles (AuNPs) fromDatura stramoniumseed | IOP Conference Series: Materials Science and Engineering | 0 | 13 |
26 | An appraisal of maintenance practice in food industries in Nigeria | Journal of Food Engineering | 2004 | 12 |
27 | Effect of different machining parameters on surface roughness of aluminium alloys based on Si and Mg content | Journal of the Brazilian Society of Mechanical Sciences and Engineering | 2019 | 11 |
28 | Effect of varied fiber alkali treatments on the tensile strength of Ampelocissus cavicaulis reinforced polyester composites: Prediction, optimization, uncertainty and sensitivity analysis | Advanced Industrial and Engineering Polymer Research | 2021 | 11 |
29 | Physico-mechanical properties of emulsion paint embedded with silver nanoparticles | Bulletin of Materials Science | 2021 | 11 |
30 | Improving mechanical and thermal properties of graphite–aluminium composite using Si, SiC and eggshell particles | Journal of Composite Materials | 2020 | 10 |
31 | Phytofabrication of titanium-silver alloy nanoparticles (Ti-AgNPs) by Cola nitida for biomedical and catalytic applications | Inorganic Chemistry Communication | 2022 | 10 |
32 | Determination of Optimum Temperature for the Laboratory Preparation of Biodiesel from Nigerian Palm Kernel Oil | Energy Sources, Part A: Recovery, Utilization and Environmental Effects | 2009 | 9 |
33 | Corrosion Resistance of Aluminium–Silicon Hypereutectic Alloy from Scrap Metal | Journal of Bio- and Tribo-Corrosion | 2019 | 9 |
34 | Calcium Oxide Supported on Coal Fly Ash (CaO/CFA) as an Efficient Catalyst for Biodiesel Production from Jatropha curcas Oil | Topics in Catalysis | 0 | 9 |
35 | Process optimization, scale-up studies, economic analysis and risk assessment of phenolic rich bioactive extracts production from Carica papaya L. leaves via heat-assisted extraction technology | Heliyon | 2022 | 9 |
36 | Determination of a Spark Ignition Engine’s Performance Parameters Using Response Surface Methodology | Energy Procedia | 2019 | 8 |
37 | Characterization and biomedical application of phytosynthesized gold nanoparticles from Datura stramonium seed extract | IOP Conference Series: Materials Science and Engineering | 0 | 8 |
38 | The development of manufacturing safety programme simulator | Journal of Modelling in Management | 2006 | 7 |
39 | Safety performance evaluation models: a review | Disaster Prevention and Management | 2007 | 7 |
40 | Maintenance workload optimisation with accident occurrence considerations and absenteeism from work using a genetic algorithm | International Journal of Management Science and Engineering Management | 2016 | 7 |
41 | Review on the Formation of Anodic Metal Oxides and their Sensing Applications | Current Nanoscience | 2018 | 7 |
42 | Modelling stochastic response of type 304 stainless steel (SS-304) crevice corrosion in chloride environments | Indian Chemical Engineer | 2019 | 6 |
43 | Modeling and optimization of two-step shea butter oil biodiesel synthesis using snail shells as heterogeneous base catalysts | Energy Advances | 0 | 6 |
44 | Effect of cassava fluid on corrosion performance of mild steel | Anti-Corrosion Methods and Materials | 2005 | 5 |
45 | Appraisal of safety practices in agro‐allied industries in south‐western Nigeria | Disaster Prevention and Management | 2005 | 5 |
46 | A modified grey-Markov fire accident model based on information turbulence indices and restricted residuals | International Journal of Management Science and Engineering Management | 2016 | 5 |
47 | A reliability-based maintenance technicians’ workloads optimisation model with stochastic consideration | Journal of Industrial Engineering International | 2016 | 5 |
48 | A novel grey–fuzzy–Markov and pattern recognition model for industrial accident forecasting | Journal of Industrial Engineering International | 2018 | 5 |
49 | Effect of silver nanoparticle (AgNp) mixed with calcium carbonate on impact, hardness and tensile strength properties of aluminium 6063 | Journal of Composite Materials | 2020 | 5 |
50 | Momordica augustisepala L. stem fibre reinforced thermoplastic starch: Mechanical property characterization and fuzzy logic artificial intelligent modelling | Results in Engineering | 2021 | 5 |