# | Title | Journal | Year | Citations |
---|
1 | Shear Modulation Force Microscopy Study of Near Surface Glass Transition Temperatures | Physical Review Letters | 2000 | 276 |
2 | Role of thermal spray processing method on the microstructure, residual stress and properties of coatings: an integrated study for Ni–5 wt.%Al bond coats | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2004 | 244 |
3 | Rapid solidification and microstructure development during plasma spray deposition | Journal of Thermal Spray Technology | 1996 | 211 |
4 | Electrospun bioscaffolds that mimic the topology of extracellular matrix | Nanomedicine: Nanotechnology, Biology, and Medicine | 2006 | 188 |
5 | Processing effects on porosity-property correlations in plasma sprayed yttria-stabilized zirconia coatings | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2003 | 176 |
6 | Substrate temperature effects on splat formation, microstructure development and properties of plasma sprayed coatings Part I: Case study for partially stabilized zirconia | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 1999 | 171 |
7 | In situ measurement of residual stresses and elastic moduli in thermal sprayed coatings | Acta Materialia | 2003 | 169 |
8 | Effect of Carbide Grain Size on the Sliding and Abrasive Wear Behavior of Thermally Sprayed WC-Co Coatings | Tribology Transactions | 1997 | 153 |
9 | Study of bulk and elementary screw dislocation assisted reverse breakdown in low-voltage (>250 V) 4H-SiC p/sup +/-n junction diodes. I. DC properties | IEEE Transactions on Electron Devices | 1999 | 153 |
10 | Intrinsic residual stresses in single splats produced by thermal spray processes | Acta Materialia | 2001 | 134 |
11 | Determination of theNi{001}c(2×2)-CO Structure by Low-Energy Electron Diffraction | Physical Review Letters | 1979 | 132 |
12 | Atomic structure of Si{001}2×1 | Physical Review B | 1983 | 129 |
13 | Splat formation and microstructure development during plasma spraying: deposition temperature effects | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2001 | 128 |
14 | Confinement-induced miscibility in polymer blends | Nature | 1999 | 126 |
15 | Atomic structure of an impurity-stabilized Si{111} surface: Refinement using a combined-layer method | Physical Review B | 1980 | 105 |
16 | New Bonding Configuration on Si(111) and Ge(111) Surfaces Induced by the Adsorption of Alkali Metals | Physical Review Letters | 1998 | 104 |
17 | Surface mechanical properties - effects of ion implantation | Nuclear Instruments & Methods | 1981 | 98 |
18 | Nanosize hexagonal tungsten oxide for gas sensing applications | Journal of the European Ceramic Society | 2008 | 95 |
19 | Metal-Surface Reconstruction Induced by Adsorbate:Fe(110)p(2×2)-S | Physical Review Letters | 1981 | 88 |
20 | Breakdown degradation associated with elementary screw dislocations in 4H-SiC p+n junction rectifiers | Solid-State Electronics | 1998 | 83 |
21 | Dynamics of Lightly Sulfonated Polystyrene Ionomers | Physical Review Letters | 1998 | 80 |
22 | Synthesis of yttrium iron garnet (YIG) by citrate–nitrate gel combustion and precursor plasma spray processes | Journal of Magnetism and Magnetic Materials | 2005 | 80 |
23 | Preparation of hexagonal WO3 from hexagonal ammonium tungsten bronze for sensing NH3 | Materials Research Bulletin | 2009 | 79 |
24 | Fast X-ray Phase-Contrast Imaging of Electrospinning Polymer Jets: Measurements of Radius, Velocity, and Concentration | Macromolecules | 2012 | 73 |
25 | Core-level shifts and the electronic structure ofCu3Au | Physical Review B | 1985 | 69 |
26 | Structural properties of copper | Physical Review B | 2001 | 69 |
27 | Mobility of Polymer Chains Confined at a Free Surface | Physical Review Letters | 2001 | 67 |
28 | Friction and wear properties of WC-Co and Mo-Mo2C based functionally graded materials | Wear | 2001 | 65 |
29 | Self-consistent-field studies of core-level shifts in ionic crystals. II. MgO and BeO | Physical Review B | 1987 | 62 |
30 | Atomic structure of Si(111)-(√3 × √3 )R30°-Al studied by dynamical low-energy electron diffraction | Physical Review B | 1990 | 62 |
31 | Curvature changes during thermal cycling of a compositionally graded NiAl2O3 multi-layered material | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 1996 | 61 |
32 | Mechanisms and effect of microstructure on creep of TiAl-based alloys | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2002 | 60 |
33 | Polymer dynamics in semidilute solution during electrospinning: A simple model and experimental observations | Physical Review E | 2011 | 60 |
34 | Preparation and antibacterial properties of Ag@polydopamine/graphene oxide sheet nanocomposite | Applied Surface Science | 2013 | 60 |
35 | Assessing Process and Coating Reliability Through Monitoring of Process and Design Relevant Coating Properties | Journal of Thermal Spray Technology | 2010 | 56 |
36 | Effect of different substrate conditions upon interface with plasma sprayed zirconia—a TEM study | Surface and Coatings Technology | 2002 | 54 |
37 | Dynamic observations of dislocation generation at grain boundaries in ice | Philosophical Magazine A: Physics of Condensed Matter, Structure, Defects and Mechanical Properties | 1993 | 53 |
38 | Vacuum plasma spraying of MoSi2 and its composites | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 1992 | 52 |
39 | Growth of face-centred-cubic titanium on aluminium | Journal of Physics Condensed Matter | 1996 | 50 |
40 | Image-based extended finite element modeling of thermal barrier coatings | Surface and Coatings Technology | 2006 | 48 |
41 | Biomembranes as models for polymer surfaces | Biomaterials | 1986 | 47 |
42 | Two-dimensional micelle formation of polystyrene-poly(vinylpyridine) diblock copolymers on mice surfaces | Applied Physics A: Materials Science and Processing | 1995 | 47 |
43 | Influence of Sulfate‐Reducing Bacteria on the Passivity of Type 304 Austenitic Stainless Steel | Journal of the Electrochemical Society | 1997 | 46 |
44 | Hexagonal-structured ε-NbN: ultra-incompressibility, high shear rigidity and a possible hard superconducting material | Scientific Reports | 2015 | 46 |
45 | Parallel and perpendicular multilayer relaxation of Fe{310} | Physical Review B | 1984 | 44 |
46 | Microstructural characterization studies to relate the properties of thermal-spray coatings to feedstock and spray conditions | Surface and Coatings Technology | 2001 | 44 |
47 | Instrumented spherical micro-indentation of plasma-sprayed coatings | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2001 | 43 |
48 | Unoccupied bulk, surface, and image states on Ni(001), Ni(111), and Ni(110) | Physical Review B | 1986 | 41 |
49 | Quantitative analysis of electron-energy-loss spectra | Ultramicroscopy | 1989 | 41 |
50 | Electrochemical and XPS evidence of the aqueous formation of Mo2O5 | Surface and Interface Analysis | 1989 | 41 |