0.0(top 100%)
impact factor
2.5K(top 10%)
papers
1.2K(top 50%)
citations
11(top 50%)
h-index
0.0(top 100%)
extended IF
2.6K
all documents
1.2K
doc citations
16(top 50%)
g-index

Top Articles

#TitleJournalYearCitations
1高周波誘導式連續加熱爐の設計 (2)Denki-seiko195039
2Environmental Issues and Recycling. The Improvement of Soft Clayey Soil Utilizing Reducing Slag Produced from Electric Arc Furnace.Denki-seiko199718
3冶金反応に及ぼすガス攪拌の影響に関する研究Denki-seiko198117
4微量テルル添加硫黄快削鋼に関する研究Denki-seiko198216
5水モデルによるRH脱ガス装置の環流量特性Denki-seiko198116
6Improvement of machinability improvement function of inclusion on sulfide-containing steel which applicd Ca treatmentDenki-seiko200415
7Soft Magnetic Materials. Electromagnetic Properties of Compressed Coores with Fe-Si-Al System Atomized Powders.Denki-seiko199812
8水モデル実験によるRH脱ガス装置の鍋内混合Denki-seiko197911
9Properties of Low Carbon High Nitrogen Martensitic Stainless SteelsDenki-seiko200611
10軸受鋼の回転曲げ疲れについてDenki-seiko197511
11Determination of trace impurities in high-purity molybdenum and tungsten.Denki-seiko198811
12Corrosion and Heat Resistant Materials. Influence of Mn/S Ratio on the Pitting Corrosion Resistance and Machinability of Ferritic Stainless Steel.Denki-seiko199611
1317-4PH鋼における逆変態オーステナイトの生成挙動とその諸特性に及ぼす影響Denki-seiko198310
14Machine Structural Steels. Delayed Fracture Resistance of High Temperature Tempered CrMoV Steel for Bolts.Denki-seiko199410
15Magnetic Materials and Semiconductors. Core Loss Reduction of Powder Cores with Fe-Si-Al Atomized Powders.Denki-seiko200010
16Structural Steels. Effect of Sulfide Morphologies on the Machinability of Shape-Controlled-Sulfide Free Machining Steel.Denki-seiko200210
17Effect of the Distribution of Primary Carbide on Fatigue Strength of Cold Work Die SteelsDenki-seiko200510
18Mechanism of Carbon Infiltration in Vacuum-Carburizing ProcessDenki-seiko200610
19Welding. Development of the Ferritic Stainless Steel Welding Wire for Automotive Exhaust Systems.Denki-seiko20019
20Ni-20Cr-0.5Al合金の高温酸化に及ぼすCe添加の影響Denki-seiko19748
21Fe-Cr焼結合金の磁気特性についてDenki-seiko19778
22Influence of Heat Treatment on Microstructure and Hardness of Ni-Cr-Al AlloyDenki-seiko20048
23Properties of a High Nitrogen Austenitic Stainless Steel Produced by a Pressurized Melting MethodDenki-seiko20068
24Effects of Silicon and Aluminum Contents on Properties of Free-Machining Magnetic Core Stainless SteelDenki-seiko19717
25Precipitation Bchavior of σ Phase in Micro-Duplex Stainless SteelDenki-seiko19787
26非金属介在物の安定性と18-8鋼の耐食性に及ぼす介在物組成の影響Denki-seiko19807
27Pb快削オーステナイト系ステンレス鋼の開発Denki-seiko19837
28Mechanical Properties at Elevated Temperature of High Nitrogen Austenitic Stainless SteelDenki-seiko20047
29Nitrogen Dissolution into Molten Steel under Pressurized AtmosphereDenki-seiko20057
30Properties of a beta type new titanium alloy Ti-22V-4Al.Denki-seiko19866
31Influence of Shot Peening Condition on the Fatigue Strength of the Carburizing SteelDenki-seiko20086
32Free-Machining Magnetic Core Stainless SteelDenki-seiko19706
33Environmental Issues and Recycling. Used-refractories Recycle Technology in Melting Shop.Denki-seiko19976
34Fe-Si-Al low core loss compressed cores with atomized fine powdersDenki-seiko20036
35Development of a high strength beta titanium alloy Ti-15V-6Cr-4Al for golf club headsDenki-seiko20046
36Effect of carburizing grain size on the fatigue properties of carburizing steels.Denki-seiko19886
37Effects of alloying elements on the impact strength of carburizing gear steel.Denki-seiko19886
38Structural Steels. Finite-Element Analysis of Contact Stress in Roller Pitting Test.Denki-seiko19986
39Influence of C, Si, Mn, Cr, Mo and V on the characteristics of 5% Cr hot-work die steel.Denki-seiko19895
40Magnetic properties and plastic strains of hot formed Nd-Fe-B magnets.Denki-seiko19905
41Influence of Phosphorus and Boron on the Strength of Carburized Steel.Denki-seiko19965
42Influence of Carbo-Nitride Precipitates on Austenite Grain Coarsening Behavior During Carburizing.Denki-seiko19965
43Effects of Particle Shapes on Magnetic Properties of Compressed Cores with Fe-Si-Al Atomized Powders.Denki-seiko20025
44ステンレス鋼粉末の試作研究Denki-seiko19755
45Development of Ultra Fine Grain Steel for Carburizing "ATOM Steel".Denki-seiko19945
46Environmental Issues and Recycling. AOD Dust Melting in Arc Furnace.Denki-seiko19975
47Tool Steels. Effect of Si Content on the Machinability of Hot Working Die Steels.Denki-seiko20005
48Tool Steels. Trend of New Die and Mold Production Technology and Tool Steels. For Shorter Delivery Times.Denki-seiko20005
49Behavior of Nitrogen Dissolution into Molten Steels and Formation of Pore in Ingots under the Pressurized AtmosphereDenki-seiko20075
50Trends in Materials and Heat Treatment of the Automatic Transmission for AutomobileDenki-seiko20085