0.1(top 100%)
impact factor
166(top 50%)
papers
947(top 50%)
citations
14(top 50%)
h-index
0.1(top 100%)
impact factor
215
all documents
1.1K
doc citations
26(top 50%)
g-index
Top Articles
# | Title | Journal | Year | Citations |
---|---|---|---|---|
1 | Windage Loss in Larger High-Speed Gears | Proceedings of the Institution of Mechanical Engineers, Part A: Power and Process Engineering | 1984 | 91 |
2 | Fluid Transmission Lines—Distributed Parameter Models Part 1: A Review of the State of the Art | Proceedings of the Institution of Mechanical Engineers, Part A: Power and Process Engineering | 1986 | 75 |
3 | Linear Dynamics of Free-Piston Stirling Engines | Proceedings of the Institution of Mechanical Engineers, Part A: Power and Process Engineering | 1985 | 63 |
4 | Effect of Compression and Expansion on Instantaneous Heat Transfer in Reciprocating Internal Combustion Engines | Proceedings of the Institution of Mechanical Engineers, Part A: Power and Process Engineering | 1987 | 54 |
5 | The Theory of Thin Shell Structures 1888–1988 | Proceedings of the Institution of Mechanical Engineers, Part A: Power and Process Engineering | 1988 | 49 |
6 | A Study of Some Factors Affecting the Performance of a Contra-Rotating Axial Compressor Stage | Proceedings of the Institution of Mechanical Engineers, Part A: Power and Process Engineering | 1988 | 44 |
7 | Performance Characteristics of Centrifugal Pumps When Handling Non-Newtonian Homogeneous Slurries | Proceedings of the Institution of Mechanical Engineers, Part A: Power and Process Engineering | 1984 | 37 |
8 | Fluid Transmission Lines—Distributed Parameter Models Part 2: Comparison of Models | Proceedings of the Institution of Mechanical Engineers, Part A: Power and Process Engineering | 1986 | 30 |
9 | The Performance Potential of Limited Cooled Diesel Engines | Proceedings of the Institution of Mechanical Engineers, Part A: Power and Process Engineering | 1983 | 28 |
10 | Review of Parameters Influencing Hydraulic Forces on Centrifugal Impellers | Proceedings of the Institution of Mechanical Engineers, Part A: Power and Process Engineering | 1987 | 28 |
11 | Experimental Stress Analysis of Four Fabricated Equal Diameter Branch Pipe Intersections Subjected to Moment Loadings and the Implications on Branch Junction Design | Proceedings of the Institution of Mechanical Engineers, Part A: Power and Process Engineering | 1985 | 24 |
12 | Stability Analysis of a Load-Sensing Hydraulic System | Proceedings of the Institution of Mechanical Engineers, Part A: Power and Process Engineering | 1988 | 23 |
13 | Design Equations for Preventing Buckling in Fabricated Torispherical Shells Subjected to Internal Pressure | Proceedings of the Institution of Mechanical Engineers, Part A: Power and Process Engineering | 1986 | 22 |
14 | Thermally Insulated Diesel Engines | Proceedings of the Institution of Mechanical Engineers, Part A: Power and Process Engineering | 1984 | 19 |
15 | Resonant Intake and Variable Geometry Turbocharging Systems for a V8 Diesel Engine | Proceedings of the Institution of Mechanical Engineers, Part A: Power and Process Engineering | 1983 | 16 |
16 | On Propagating Buckles and their Arrest in Sub-Sea Pipelines | Proceedings of the Institution of Mechanical Engineers, Part A: Power and Process Engineering | 1983 | 16 |
17 | New Guidelines for the Preliminary Design and Performance Prediction of Axial-Flow Turbines | Proceedings of the Institution of Mechanical Engineers, Part A: Power and Process Engineering | 1987 | 14 |
18 | The Influence of Diffuser Channel Geometry on the Flow Range and Efficiency of a Centrifugal Compressor | Proceedings of the Institution of Mechanical Engineers, Part A: Power and Process Engineering | 1987 | 12 |
19 | Blade Configuration Optimization and Performance Characteristics of a Simple Savonius Rotor | Proceedings of the Institution of Mechanical Engineers, Part A: Power and Process Engineering | 1985 | 11 |
20 | A Continuously Variable Poppet Valve Actuator for Internal Combustion Engines | Proceedings of the Institution of Mechanical Engineers, Part A: Power and Process Engineering | 1986 | 11 |
21 | Submarine Power Systems Using the V4-275R Stirling Engine | Proceedings of the Institution of Mechanical Engineers, Part A: Power and Process Engineering | 1988 | 11 |
22 | Low-Pressure Steam Turbine Disc Cracking—An Update | Proceedings of the Institution of Mechanical Engineers, Part A: Power and Process Engineering | 1985 | 10 |
23 | Systematic Procedure for Selection of Heat Exchangers | Proceedings of the Institution of Mechanical Engineers, Part A: Power and Process Engineering | 1983 | 9 |
24 | Aero Engine Development for the Future | Proceedings of the Institution of Mechanical Engineers, Part A: Power and Process Engineering | 1983 | 9 |
25 | Approximate Analyses of Feed and District Heating Cycles for Steam Combined Heat and Power Plant | Proceedings of the Institution of Mechanical Engineers, Part A: Power and Process Engineering | 1987 | 9 |
26 | Determination of the Initial Gaps between Flat Flanges without Gaskets | Proceedings of the Institution of Mechanical Engineers, Part A: Power and Process Engineering | 1987 | 9 |
27 | Leakage Through Loaded Flat-Flanged Joints without Gaskets | Proceedings of the Institution of Mechanical Engineers, Part A: Power and Process Engineering | 1988 | 9 |
28 | The Efficiency of Roots Compressors and Compressors with Fixed Internal Compression | Proceedings of the Institution of Mechanical Engineers, Part A: Power and Process Engineering | 1988 | 9 |
29 | The Sensitivity of Heat Exchanger Calculations to Uncertainties in the Physical Properties of the Process Fluids | Proceedings of the Institution of Mechanical Engineers, Part A: Power and Process Engineering | 1983 | 8 |
30 | The Parsons Centenary—a Hundred Years of Steam Turbines | Proceedings of the Institution of Mechanical Engineers, Part A: Power and Process Engineering | 1984 | 8 |
31 | The 250 kW and 3 MW Wind Turbines on Burgar Hill, Orkney | Proceedings of the Institution of Mechanical Engineers, Part A: Power and Process Engineering | 1984 | 8 |
32 | Rotary Mechanical Seals in Process Duties: An Assessment of the State of the Art | Proceedings of the Institution of Mechanical Engineers, Part A: Power and Process Engineering | 1985 | 8 |
33 | A Study of Factors Affecting Mechanical Seal Performance | Proceedings of the Institution of Mechanical Engineers, Part A: Power and Process Engineering | 1987 | 8 |
34 | Design Equations for Preventing Buckling in Fabricated Torispherical Shells Subject to Internal Pressure | Proceedings of the Institution of Mechanical Engineers, Part A: Power and Process Engineering | 1987 | 8 |
35 | The Influence of Diffuser Channel Length-Width Ratio on the Efficiency of a Centrifugal Compressor | Proceedings of the Institution of Mechanical Engineers, Part A: Power and Process Engineering | 1988 | 8 |
36 | The Differential Compound Engine—A New Integrated Engine Transmission System Concept for Heavy Vehicles | Proceedings of the Institution of Mechanical Engineers, Part A: Power and Process Engineering | 1983 | 7 |
37 | Radioactive Effluent Treatment Plant—Sellafield Reprocessing Factory | Proceedings of the Institution of Mechanical Engineers, Part A: Power and Process Engineering | 1987 | 7 |
38 | Coal-Fired Stirling Engines for Railway Locomotive and Stationary Power Applications | Proceedings of the Institution of Mechanical Engineers, Part A: Power and Process Engineering | 1983 | 6 |
39 | Comparison of Measured and Calculated Gas Velocities in the Inlet Channel of a Single Cylinder Reciprocating Engine | Proceedings of the Institution of Mechanical Engineers, Part A: Power and Process Engineering | 1984 | 6 |
40 | Radioisotope Techniques for Problem-Solving in the Chemical Industry | Proceedings of the Institution of Mechanical Engineers, Part A: Power and Process Engineering | 1984 | 6 |
41 | The Active Control of Noise and Vibration and Some Applications in Industry | Proceedings of the Institution of Mechanical Engineers, Part A: Power and Process Engineering | 1984 | 6 |
42 | An Analytical Approach to the Estimation of the Performance of Steam Turbine Cycles Off-Design | Proceedings of the Institution of Mechanical Engineers, Part A: Power and Process Engineering | 1985 | 6 |
43 | Modelling Total Life Cycle Cost | Proceedings of the Institution of Mechanical Engineers, Part A: Power and Process Engineering | 1986 | 6 |
44 | Flow in Distribution Conduits | Proceedings of the Institution of Mechanical Engineers, Part A: Power and Process Engineering | 1986 | 6 |
45 | Multi-Vane Expanders as Prime Movers in Low-Grade Energy Engines | Proceedings of the Institution of Mechanical Engineers, Part A: Power and Process Engineering | 1986 | 6 |
46 | JET Flywheel Generators | Proceedings of the Institution of Mechanical Engineers, Part A: Power and Process Engineering | 1986 | 6 |
47 | Review of Some of the Major Engineering Developments in the High-Pressure Polyethylene Process 1933–1983 | Proceedings of the Institution of Mechanical Engineers, Part A: Power and Process Engineering | 1986 | 6 |
48 | Reliability and Maintainability in a Turbine Governing System | Proceedings of the Institution of Mechanical Engineers, Part A: Power and Process Engineering | 1987 | 6 |
49 | A High-Speed Direct Injection Diesel Engine for Passenger Cars | Proceedings of the Institution of Mechanical Engineers, Part A: Power and Process Engineering | 1988 | 6 |
50 | Future Coal-Burning Stirling Engines | Proceedings of the Institution of Mechanical Engineers, Part A: Power and Process Engineering | 1983 | 5 |