| # | Title | Journal | Year | Citations |
|---|
| 1 | A review of fault detection and diagnostics methods for building systems | Science and Technology for the Built Environment | 2018 | 234 |
| 2 | Smart grid energy flexible buildings through the use of heat pumps and building thermal mass as energy storage in the Belgian context | Science and Technology for the Built Environment | 2015 | 97 |
| 3 | Design of a hydraulically driven compressive elastocaloric cooling system | Science and Technology for the Built Environment | 2016 | 85 |
| 4 | Design and optimization of form and facade of an office building using the genetic algorithm | Science and Technology for the Built Environment | 2020 | 67 |
| 5 | Indoor environmental quality, occupant perception, prevalence of sick building syndrome symptoms, and sick leave in a Green Mark Platinum-rated versus a non-Green Mark-rated building: A case study | Science and Technology for the Built Environment | 2015 | 57 |
| 6 | Magnetic heat pumps: An overview of design principles and challenges | Science and Technology for the Built Environment | 2016 | 54 |
| 7 | Development and implementation of a thermostat learning algorithm | Science and Technology for the Built Environment | 2018 | 54 |
| 8 | The ASHRAE Great Energy Predictor III competition: Overview and results | Science and Technology for the Built Environment | 2020 | 54 |
| 9 | Application of deep Q-networks for model-free optimal control balancing between different HVAC systems | Science and Technology for the Built Environment | 2020 | 53 |
| 10 | Two-phase pressure drop and condensation heat transfer of R32/R1234ze(E) non-azeotropic mixtures inside a single microchannel | Science and Technology for the Built Environment | 2015 | 52 |
| 11 | Design optimization and validation of high-performance heat exchangers using approximation assisted optimization and additive manufacturing | Science and Technology for the Built Environment | 2017 | 52 |
| 12 | Integrating IAQ control strategies to reduce the risk of asymptomatic SARS CoV-2 infections in classrooms and open plan offices | Science and Technology for the Built Environment | 2020 | 51 |
| 13 | Update of the scientific evidence for specifying lower limit relative humidity levels for comfort, health, and indoor environmental quality in occupied spaces (RP-1630) | Science and Technology for the Built Environment | 2017 | 49 |
| 14 | Occupant behavior lifestyles in a residential nearly zero energy building: Effect on energy use and thermal comfort | Science and Technology for the Built Environment | 2016 | 46 |
| 15 | Airborne transmission of SARS-CoV-2 in indoor environments: A comprehensive review | Science and Technology for the Built Environment | 2021 | 44 |
| 16 | Condensation and evaporation of R32/R1234ze(E) and R744/R32/R1234ze(E) flow in horizontal microfin tubes | Science and Technology for the Built Environment | 2015 | 43 |
| 17 | An investigation on energy-related occupancy behavior for low-income residential buildings | Science and Technology for the Built Environment | 2015 | 42 |
| 18 | Computational fluid dynamics study on the influence of an alternate ventilation configuration on the possible flow path of infectious cough aerosols in a mock airborne infection isolation room | Science and Technology for the Built Environment | 2017 | 42 |
| 19 | Associations of bedroom temperature and ventilation with sleep quality | Science and Technology for the Built Environment | 2020 | 42 |
| 20 | Validation of vertical ground heat exchanger design methodologies | Science and Technology for the Built Environment | 2015 | 41 |
| 21 | A review on desiccant coated heat exchangers | Science and Technology for the Built Environment | 2017 | 41 |
| 22 | Building demand response and control methods for smart grids: A review | Science and Technology for the Built Environment | 2016 | 40 |
| 23 | A review of recent development in variable refrigerant flow systems | Science and Technology for the Built Environment | 2015 | 38 |
| 24 | Optimal design of adsorption chillers based on a validated dynamic object-oriented model | Science and Technology for the Built Environment | 2015 | 36 |
| 25 | Investigation of temperature regulation effects on indoor thermal comfort, air quality, and energy savings toward green residential buildings | Science and Technology for the Built Environment | 2019 | 36 |
| 26 | Window and door opening behavior, carbon dioxide concentration, temperature, and energy use during the heating season in classrooms with different ventilation retrofits—ASHRAE RP1624 | Science and Technology for the Built Environment | 2018 | 35 |
| 27 | Comfort and energy performance analysis of different glazing systems coupled with three shading control strategies | Science and Technology for the Built Environment | 2018 | 35 |
| 28 | Demonstration of HVAC chiller control for power grid frequency regulation—Part 1: Controller development and experimental results | Science and Technology for the Built Environment | 2015 | 34 |
| 29 | Ventilation strategies and air quality management in passenger aircraft cabins: A review of experimental approaches and numerical simulations | Science and Technology for the Built Environment | 2018 | 34 |
| 30 | Fault-tolerant optimal control of a building HVAC system | Science and Technology for the Built Environment | 2015 | 33 |
| 31 | Indoor air quality in 24 California residences designed as high-performance homes | Science and Technology for the Built Environment | 2015 | 33 |
| 32 | Elastocaloric effect of a Ni-Ti plate to be applied in a regenerator-based cooling device | Science and Technology for the Built Environment | 2016 | 33 |
| 33 | Molecular simulation studies in hydrofluoroolefine (HFO) working fluids and their blends | Science and Technology for the Built Environment | 2016 | 33 |
| 34 | A power limiting control strategy based on adaptive utility function for fast demand response of buildings in smart grids | Science and Technology for the Built Environment | 2016 | 33 |
| 35 | Simulation and experimental demonstration of model predictive control in a building HVAC system | Science and Technology for the Built Environment | 2015 | 32 |
| 36 | Airflow patterns due to door motion and pressurization in hospital isolation rooms | Science and Technology for the Built Environment | 2016 | 31 |
| 37 | Elastocaloric cooling: From fundamental thermodynamics to solid state air conditioning | Science and Technology for the Built Environment | 2016 | 31 |
| 38 | Energy savings and ventilation performance from CO 2 -based demand controlled ventilation: Simulation results from ASHRAE RP-1747 (ASHRAE RP-1747) | Science and Technology for the Built Environment | 2020 | 31 |
| 39 | Horizontal convective boiling of R448A, R449A, and R452B within a micro-fin tube | Science and Technology for the Built Environment | 2016 | 30 |
| 40 | Performance of various commercial TiO 2 in photocatalytic degradation of a mixture of indoor air pollutants: Effect of photocatalyst and operating parameters | Science and Technology for the Built Environment | 2019 | 30 |
| 41 | Review of studies on thermal comfort in Indian residential buildings | Science and Technology for the Built Environment | 2020 | 30 |
| 42 | Development of New Low-GWP Refrigerants–Refrigerant Mixtures Including HFO-1123 | Science and Technology for the Built Environment | 2019 | 29 |
| 43 | Wearable personal exhaust ventilation: Improved indoor air quality and reduced exposure to air exhaled from a sick doctor | Science and Technology for the Built Environment | 2015 | 28 |
| 44 | A time-based analysis of the personalized exhaust system for airborne infection control in healthcare settings | Science and Technology for the Built Environment | 2015 | 28 |
| 45 | Human thermal adaptation based on university students in China's severe cold area | Science and Technology for the Built Environment | 2017 | 28 |
| 46 | Sensor networks for routine indoor air quality monitoring in buildings: Impacts of placement, accuracy, and number of sensors | Science and Technology for the Built Environment | 2018 | 28 |
| 47 | Accurate prediction of work and coefficient of performance of elastocaloric materials with phase transformation kinetics | Science and Technology for the Built Environment | 2018 | 28 |
| 48 | Effect of phase change material on compressor on-off cycling of a household refrigerator | Science and Technology for the Built Environment | 2015 | 27 |
| 49 | Experimental evaluation and field trial of low global warming potential R404A replacements for commercial refrigeration | Science and Technology for the Built Environment | 2016 | 27 |
| 50 | An MAS-based subjective model for indoor adaptive thermal comfort | Science and Technology for the Built Environment | 2015 | 26 |
