# | Title | Journal | Year | Citations |
---|
1 | A review on the characterisation of natural fibres and their composites after alkali treatment and water absorption | Plastics, Rubber and Composites | 2017 | 231 |
2 | Effect of the printing bed temperature on the adhesion of parts produced by fused filament fabrication | Plastics, Rubber and Composites | 2018 | 184 |
3 | Mode II fracture toughness evaluation using four point bend, end notched flexure test | Plastics, Rubber and Composites | 1999 | 159 |
4 | Characterisation of carbon fibres recycled from scrap composites using fluidised bed process | Plastics, Rubber and Composites | 2002 | 139 |
5 | Auxetic polypropylene fibres:Part 1 - Manufacture and characterisation | Plastics, Rubber and Composites | 2002 | 133 |
6 | Review on rubbers in medicine: natural, silicone and polyurethane rubbers | Plastics, Rubber and Composites | 2013 | 120 |
7 | Can the melt flow index be used to predict the success of fused deposition modelling of commercial poly(lactic acid) filaments into 3D printed materials? | Plastics, Rubber and Composites | 2018 | 116 |
8 | Comparison of test configurations for determination of mode II interlaminar fracture toughness results from international collaborative test programme | Plastics, Rubber and Composites | 1999 | 111 |
9 | New technology for thermal processing of poly(vinyl alcohol) | Plastics, Rubber and Composites | 2007 | 106 |
10 | Micromoulding: process characteristics and product properties | Plastics, Rubber and Composites | 2003 | 95 |
11 | Structural batteries made from fibre reinforced composites | Plastics, Rubber and Composites | 2010 | 71 |
12 | Modelling residual mechanical properties of polymer composites after fire | Plastics, Rubber and Composites | 2003 | 68 |
13 | Micromoulding: process measurements, product morphology and properties | Plastics, Rubber and Composites | 2004 | 64 |
14 | Numerical simulation of polymeric foaming processes using modified nucleation theory | Plastics, Rubber and Composites | 2006 | 64 |
15 | Influence of ion beam and silver nanoparticles on dielectric properties of flexible PVA/PANI polymer composite films | Plastics, Rubber and Composites | 2022 | 64 |
16 | Transverse tensile strength of unidirectional fibre-reinforced polymers and self-healing of interfacial debonding | Plastics, Rubber and Composites | 2006 | 63 |
17 | Mechanical properties of maleic anhydride treated jute fibre/polypropylene composites | Plastics, Rubber and Composites | 2008 | 62 |
18 | Novel bionanocomposites: processing, properties and potential applications | Plastics, Rubber and Composites | 2009 | 62 |
19 | Health monitoring of composites using Lamb waves generated by piezoelectric devices | Plastics, Rubber and Composites | 2000 | 60 |
20 | Investigation of cure induced shrinkage in unreinforced epoxy resin | Plastics, Rubber and Composites | 2002 | 59 |
21 | Carbon nanotubes/carbon black synergistic reinforced natural rubber composites | Plastics, Rubber and Composites | 2009 | 57 |
22 | On consolidation of self-reinforced polypropylene composites | Plastics, Rubber and Composites | 2006 | 55 |
23 | Multifunctional composite materials for energy storage in structural load paths | Plastics, Rubber and Composites | 2013 | 55 |
24 | Influence of zinc oxide nanoparticles on structural and electrical properties of polyvinyl alcohol films | Plastics, Rubber and Composites | 2015 | 54 |
25 | Effect of temperature on tensile properties of HDPE pipe material | Plastics, Rubber and Composites | 2006 | 53 |
26 | Biaxial characterisation of materials for thermoforming and blow moulding | Plastics, Rubber and Composites | 2005 | 52 |
27 | Thermographic non-destructive inspection of wind turbine blades using unmanned aerial systems | Plastics, Rubber and Composites | 2015 | 51 |
28 | Polymer micromould design and micromoulding process | Plastics, Rubber and Composites | 2003 | 48 |
29 | Natural rubber/carbon black/carbon nanotubes composites prepared through ultrasonic assisted latex mixing process | Plastics, Rubber and Composites | 2011 | 46 |
30 | Temperature dependence of essential and non-essential work of fracture parameters for polycarbonate film | Plastics, Rubber and Composites | 2000 | 45 |
31 | Compatibilising effect of carbon black on morphology of NR–NBR blends | Plastics, Rubber and Composites | 2001 | 45 |
32 | Polymeric materials for impact and energy dissipation | Plastics, Rubber and Composites | 2006 | 45 |
33 | Characterisation of thermally treated and untreated polyethylene–polypropylene blends using DSC, TGA and IR techniques | Plastics, Rubber and Composites | 2009 | 44 |
34 | FTIR analysis of silane grafted high density polyethylene | Plastics, Rubber and Composites | 2009 | 44 |
35 | Finite element analysis of effects of clearance on single shear composite bolted joints | Plastics, Rubber and Composites | 2003 | 41 |
36 | Developments in oriented polymers, 1970–2004 | Plastics, Rubber and Composites | 2004 | 40 |
37 | UV irradiation and aging effects on nanoscale mechanical properties of ultra high molecular weight polyethylene for biomedical implants | Plastics, Rubber and Composites | 2008 | 40 |
38 | Preparation and characterisation of nanocellulose reinforced polyamide-6 | Plastics, Rubber and Composites | 2011 | 40 |
39 | Effect of nucleating agents and pigments on crystallisation, morphology, and mechanical properties of polypropylene | Plastics, Rubber and Composites | 2000 | 39 |
40 | Performance of filled polymer systems under novel dynamic extrusion processing conditions | Plastics, Rubber and Composites | 2002 | 39 |
41 | Devulcanisation of natural rubber vulcanisate through solid state mechanochemical milling at ambient temperature | Plastics, Rubber and Composites | 2007 | 39 |
42 | Morphology of microinjection moulded polyoxymethylene | Plastics, Rubber and Composites | 2010 | 39 |
43 | Interlaminar toughness characterisation of 3D woven carbon fibre composites | Plastics, Rubber and Composites | 2013 | 39 |
44 | Fractographic study of static and fatigue failures in polymer composites | Plastics, Rubber and Composites | 1999 | 38 |
45 | Crack growth in composites Applicability of R-curves and bridging laws | Plastics, Rubber and Composites | 2000 | 38 |
46 | Thermoplastic dynamic vulcanisates containing LDPE, rubber, and thermochemically reclaimed ground tyre rubber | Plastics, Rubber and Composites | 2002 | 38 |
47 | Surface modification of fly ash – characterisation and evaluation as reinforcing filler in polyisoprene | Plastics, Rubber and Composites | 1999 | 37 |
48 | Thermoplastic tape placement process –in situconsolidation is reachable | Plastics, Rubber and Composites | 2009 | 36 |
49 | Multistage fatigue life monitoring on carbon fibre reinforced polymers enhanced with multiwall carbon nanotubes | Plastics, Rubber and Composites | 2009 | 36 |
50 | Preparation, structure, performance, industrialisation and application of advanced rubber/clay nanocomposites based on latex compounding method | Plastics, Rubber and Composites | 2010 | 36 |