# | Title | Journal | Year | Citations |
---|
1 | Aluminium matrix hybrid composites: a review of reinforcement philosophies; mechanical, corrosion and tribological characteristics | Journal of Materials Research and Technology | 2015 | 554 |
2 | Extraction and characterization of lignin from different biomass resources | Journal of Materials Research and Technology | 2015 | 535 |
3 | Recent progress of reinforcement materials: a comprehensive overview of composite materials | Journal of Materials Research and Technology | 2019 | 449 |
4 | Fabrication of Metal and Alloy Components by Additive Manufacturing: Examples of 3D Materials Science | Journal of Materials Research and Technology | 2012 | 365 |
5 | Wear behaviour analysis on aluminium alloy 7050 with reinforced SiC through taguchi approach | Journal of Materials Research and Technology | 2020 | 361 |
6 | Advance research progresses in aluminium matrix composites: manufacturing & applications | Journal of Materials Research and Technology | 2019 | 336 |
7 | Microstructures and Properties of 17-4 PH Stainless Steel Fabricated by Selective Laser Melting | Journal of Materials Research and Technology | 2012 | 317 |
8 | Characterization of hybrid aluminum matrix composites for advanced applications – A review | Journal of Materials Research and Technology | 2016 | 315 |
9 | The effect of fiber morphology on the tensile strength of natural fibers | Journal of Materials Research and Technology | 2013 | 296 |
10 | A review on natural fibers for development of eco-friendly bio-composite: characteristics, and utilizations | Journal of Materials Research and Technology | 2021 | 262 |
11 | Investigations on mechanical properties of aluminum hybrid composites | Journal of Materials Research and Technology | 2014 | 250 |
12 | Preparation of cellulose-based hydrogel: a review | Journal of Materials Research and Technology | 2021 | 243 |
13 | Green synthesis of iron oxide nanoparticles using pomegranate seeds extract and photocatalytic activity evaluation for the degradation of textile dye | Journal of Materials Research and Technology | 2019 | 232 |
14 | Tool condition monitoring techniques in milling process — a review | Journal of Materials Research and Technology | 2020 | 221 |
15 | Effective adsorptive removal of azo dyes over spherical ZnO nanoparticles | Journal of Materials Research and Technology | 2019 | 216 |
16 | A study of the optical bandgap energy and Urbach tail of spray-deposited CdS:In thin films | Journal of Materials Research and Technology | 2013 | 215 |
17 | Wear and mechanical properties of 6061-T6 aluminum alloy surface hybrid composites [(SiC+Gr) and (SiC+Al2O3)] fabricated by friction stir processing | Journal of Materials Research and Technology | 2013 | 214 |
18 | Industrial solid waste for heavy metals adsorption features and challenges; a review | Journal of Materials Research and Technology | 2020 | 209 |
19 | Characterization of Al-7075 metal matrix composites: a review | Journal of Materials Research and Technology | 2019 | 204 |
20 | Wear resistance enhancement of titanium alloy (Ti–6Al–4V) by ball burnishing process | Journal of Materials Research and Technology | 2017 | 203 |
21 | Revealing the benefits of entropy weights method for multi-objective optimization in machining operations: A critical review | Journal of Materials Research and Technology | 2021 | 201 |
22 | Mechanical characteristics of wood, ceramic, metal and carbon fiber-based PLA composites fabricated by FDM | Journal of Materials Research and Technology | 2019 | 200 |
23 | Sugar palm (Arenga pinnata (Wurmb.) Merr) cellulosic fibre hierarchy: a comprehensive approach from macro to nano scale | Journal of Materials Research and Technology | 2019 | 195 |
24 | Fabrication of Al5083/B4C surface composite by friction stir processing and its tribological characterization | Journal of Materials Research and Technology | 2015 | 194 |
25 | Evaluation of tool wear, surface roughness/topography and chip morphology when machining of Ni-based alloy 625 under MQL, cryogenic cooling and CryoMQL | Journal of Materials Research and Technology | 2020 | 194 |
26 | Evaluation of corrosion inhibition performance of phosphorus polymer for carbon steel in [1 M] HCl: Computational studies (DFT, MC and MD simulations) | Journal of Materials Research and Technology | 2020 | 189 |
27 | Fabrication characteristics and mechanical behaviour of rice husk ash – Alumina reinforced Al-Mg-Si alloy matrix hybrid composites | Journal of Materials Research and Technology | 2013 | 186 |
28 | Lignin – an alternative precursor for sustainable and cost-effective automotive carbon fiber | Journal of Materials Research and Technology | 2015 | 186 |
29 | Characterization and some physical studies of PVA/PVP filled with MWCNTs | Journal of Materials Research and Technology | 2019 | 186 |
30 | Effect of sugar palm nanofibrillated cellulose concentrations on morphological, mechanical and physical properties of biodegradable films based on agro-waste sugar palm (Arenga pinnata (Wurmb.) Merr) starch | Journal of Materials Research and Technology | 2019 | 186 |
31 | Structural, optical, morphological and thermal properties of PEO/PVP blend containing different concentrations of biosynthesized Au nanoparticles | Journal of Materials Research and Technology | 2018 | 185 |
32 | A short review on mechanical properties of graphene reinforced metal matrix composites | Journal of Materials Research and Technology | 2020 | 175 |
33 | Aqueous chemical route synthesis and the effect of calcination temperature on the structural and optical properties of ZnO nanoparticles | Journal of Materials Research and Technology | 2014 | 172 |
34 | Nano Biosensors: Properties, applications and electrochemical techniques | Journal of Materials Research and Technology | 2021 | 166 |
35 | Optimization of process parameters in drilling of GFRP composite using Taguchi method | Journal of Materials Research and Technology | 2014 | 157 |
36 | Experimental investigation of machined hole and optimization of machining parameters using electrochemical machining | Journal of Materials Research and Technology | 2019 | 157 |
37 | Simultaneous adsorption of Ni(II) and Mn(II) ions from aqueous solution unto a Nigerian kaolinite clay | Journal of Materials Research and Technology | 2014 | 155 |
38 | Improvement of machinability of Ti and its alloys using cooling-lubrication techniques: a review and future prospect | Journal of Materials Research and Technology | 2021 | 154 |
39 | The adsorption of Cr(VI) from water samples using graphene oxide-magnetic (GO-Fe3O4) synthesized from natural cellulose-based graphite (kusambi wood or Schleichera oleosa): Study of kinetics, isotherms and thermodynamics | Journal of Materials Research and Technology | 2020 | 153 |
40 | Effects of fibre treatment on mechanical properties of kenaf fibre reinforced composites: a review | Journal of Materials Research and Technology | 2019 | 152 |
41 | Sustainability of additive manufacturing: the circular economy of materials and environmental perspectives | Journal of Materials Research and Technology | 2020 | 151 |
42 | Recent research progress in solid state friction-stir welding of aluminium–magnesium alloys: a critical review | Journal of Materials Research and Technology | 2020 | 151 |
43 | “Smart” materials-based near-infrared light-responsive drug delivery systems for cancer treatment: A review | Journal of Materials Research and Technology | 2019 | 149 |
44 | Flexural, thermal and dynamic mechanical properties of date palm fibres reinforced epoxy composites | Journal of Materials Research and Technology | 2019 | 147 |
45 | Fabrication and characterization of A359/Al2O3 metal matrix composite using electromagnetic stir casting method | Journal of Materials Research and Technology | 2013 | 145 |
46 | UHPC evolution, development, and utilization in construction: a review | Journal of Materials Research and Technology | 2021 | 143 |
47 | 3D printing technology; methods, biomedical applications, future opportunities and trends | Journal of Materials Research and Technology | 2021 | 143 |
48 | New insight on the solidification path of an alloy 625 weld overlay | Journal of Materials Research and Technology | 2013 | 142 |
49 | Experimental study of surface quality and damage when drilling unidirectional CFRP composites | Journal of Materials Research and Technology | 2014 | 142 |
50 | Eco-friendly concrete containing recycled plastic as partial replacement for sand | Journal of Materials Research and Technology | 2020 | 140 |