# | Title | Journal | Year | Citations |
---|
1 | Machine Learning to Optimize Additive Manufacturing Parameters for Laser Powder Bed Fusion of Inconel 718 | Minerals, Metals and Materials Series | 2018 | 43 |
2 | Electronic Waste and Printed Circuit Board Recycling Technologies | Minerals, Metals and Materials Series | 2019 | 40 |
3 | Natural Fibers Reinforced Polymer Composites Applied in Ballistic Multilayered Armor for Personal Protection—An Overview | Minerals, Metals and Materials Series | 2019 | 29 |
4 | Low-Temperature Synthesis of Superparamagnetic Fe3O4 Morphologies Tuned Using Oleic Acid as Crystal Growth Modifiers | Minerals, Metals and Materials Series | 2020 | 28 |
5 | The Adsorption of Heavy Metals from Aqueous Solutions Using Silica Microparticles Synthesized from Sodium Silicate | Minerals, Metals and Materials Series | 2021 | 27 |
6 | Creep and Thermomechanical Fatigue of Functionally Graded Inconel 718 Produced by Additive Manufacturing | Minerals, Metals and Materials Series | 2018 | 26 |
7 | Fabrication of Monodispersed Needle-Sized Hollow Core Polystyrene Microspheres | Minerals, Metals and Materials Series | 2019 | 25 |
8 | Incorporation of Metallic Nanoparticles Into Alkyd Resin: A Review of Their Coating Performance | Minerals, Metals and Materials Series | 2022 | 24 |
9 | The Evolution of Microstructure of an High Ni HSLA X100 Forged Steel Slab by Thermomechanical Controlled Processing | Minerals, Metals and Materials Series | 2018 | 23 |
10 | Ordered Colloidal Crystals Fabrication and Studies on the Properties of Poly (Styrene–Butyl Acrylate–Acrylic Acid) and Polystyrene Latexes | Minerals, Metals and Materials Series | 2019 | 22 |
11 | Nanostructured Materials: A Review on Its Application in Water Treatment | Minerals, Metals and Materials Series | 2022 | 22 |
12 | Comprehensive Utilization of Red Mud: Current Research Status and a Possible Way Forward for Non-hazardous Treatment | Minerals, Metals and Materials Series | 2018 | 20 |
13 | Nanostructured Graphene Thin Films: A Brief Review of Their Fabrication Techniques and Corrosion Protective Performance | Minerals, Metals and Materials Series | 2022 | 20 |
14 | Multicomponent Thermodynamic Databases for Complex Non-ferrous Pyrometallurgical Processes | Minerals, Metals and Materials Series | 2018 | 19 |
15 | Natural Gas Utilization in Blast Furnace Ironmaking: Tuyère Injection, Shaft Injection and Prereduction | Minerals, Metals and Materials Series | 2017 | 16 |
16 | Scaled-Up Fabrication of Thin-Walled ZK60 Tubing Using Shear Assisted Processing and Extrusion (ShAPE) | Minerals, Metals and Materials Series | 2017 | 15 |
17 | Superalloy 718: Evolution of the Alloy from High to Low Temperature Application | Minerals, Metals and Materials Series | 2018 | 15 |
18 | Inert Anodes—the Blind Alley to Environmental Friendliness? | Minerals, Metals and Materials Series | 2018 | 14 |
19 | Characterization of 17-4 PH Processed via Bound Metal Deposition (BMD) | Minerals, Metals and Materials Series | 2020 | 14 |
20 | ZnO-NPs-Coated Implants with Osteogenic Properties for Enhanced Osseointegration | Minerals, Metals and Materials Series | 2023 | 14 |
21 | The Influence of Gas Cooling in Context of Wire Arc Additive Manufacturing—A Novel Strategy of Affecting Grain Structure and Size | Minerals, Metals and Materials Series | 2017 | 13 |
22 | Investigations on Rotary Tool Near-Dry Electric Discharge Machining | Minerals, Metals and Materials Series | 2017 | 13 |
23 | Magnesium Process and Alloy Development for Applications in the Automotive Industry | Minerals, Metals and Materials Series | 2019 | 13 |
24 | Interface Microstructural Characterization of Titanium to Stainless Steel Dissimilar Friction Welds | Minerals, Metals and Materials Series | 2019 | 13 |
25 | SPL Recycling and Re-processing | Minerals, Metals and Materials Series | 2017 | 12 |
26 | Commercial Processes for the Extraction of Platinum Group Metals (PGMs) | Minerals, Metals and Materials Series | 2018 | 12 |
27 | Effect of Heat Treatments on Fatigue Properties of Ti–6Al–4V and 316L Produced by Laser Powder Bed Fusion in As-Built Surface Condition | Minerals, Metals and Materials Series | 2019 | 12 |
28 | Alumina Feeding and Raft Formation: Raft Collection and Process Parameters | Minerals, Metals and Materials Series | 2019 | 12 |
29 | Powder Packing Density and Its Impact on SLM-Based Additive Manufacturing | Minerals, Metals and Materials Series | 2019 | 12 |
30 | Characterization of Phase Equilibria and Thermodynamics with Integrated Experimental and Modelling Approach for Complex Lead Primary and Recycling Processing | Minerals, Metals and Materials Series | 2020 | 12 |
31 | Mechanical Properties and Behavior of Additive Manufactured Stainless Steel 316L | Minerals, Metals and Materials Series | 2017 | 12 |
32 | A Decision-Based Design Method to Explore the Solution Space for Microstructure After Cooling Stage to Realize the End Mechanical Properties of Hot Rolled Product | Minerals, Metals and Materials Series | 2017 | 12 |
33 | Innovative Technology for Alumina Production from Low-Grade Raw Materials | Minerals, Metals and Materials Series | 2016 | 12 |
34 | Characterization of Minerals, Metals, and Materials 2017 | Minerals, Metals and Materials Series | 2017 | 11 |
35 | Superalloys 2020 | Minerals, Metals and Materials Series | 2020 | 11 |
36 | Additive Manufacturing of Aluminum Using Friction Stir Deposition | Minerals, Metals and Materials Series | 2020 | 11 |
37 | Casting Characteristics of High Cerium Content Aluminum Alloys | Minerals, Metals and Materials Series | 2017 | 11 |
38 | Microstructural Control and Optimization of Haynes 282 Manufactured Through Laser Powder Bed Fusion | Minerals, Metals and Materials Series | 2020 | 11 |
39 | A Review of Nanovanadium Compounds for Cancer Cell Therapy | Minerals, Metals and Materials Series | 2023 | 11 |
40 | Finite Element Modelling of Electrokinetic Deposition of Zinc on Mild Steel with ZnO-Citrus sinensis as Nano-Additive | Minerals, Metals and Materials Series | 2018 | 10 |
41 | Impact of Powder Variability on the Microstructure and Mechanical Behavior of Selective Laser Melted Alloy 718 | Minerals, Metals and Materials Series | 2018 | 10 |
42 | Light Metals 2019 | Minerals, Metals and Materials Series | 2019 | 10 |
43 | From Recycled Machining Waste to Useful Powders for Metal Additive Manufacturing | Minerals, Metals and Materials Series | 2019 | 10 |
44 | Green Materials Engineering | Minerals, Metals and Materials Series | 2019 | 10 |
45 | The Effect of Heat Treatment on Tensile Yielding Response of the New Superalloy ABD-900AM for Additive Manufacturing | Minerals, Metals and Materials Series | 2020 | 10 |
46 | Digital Manufacturing for Foundries 4.0 | Minerals, Metals and Materials Series | 2020 | 10 |
47 | 3D Characterization of the Columnar-to-Equiaxed Transition in Additively Manufactured Inconel 718 | Minerals, Metals and Materials Series | 2020 | 10 |
48 | Ballistic Performance in Multilayer Armor with Epoxy Composite Reinforced with Malva Fibers | Minerals, Metals and Materials Series | 2017 | 10 |
49 | One-Step Extraction of Lead from Spent Lead-Acid Battery Paste via Reductive Sulfur-Fixing Smelting: Thermodynamic Analysis | Minerals, Metals and Materials Series | 2017 | 9 |
50 | Direct Laser Metal Deposition of Eutectic Al-Si Alloy for Automotive Applications | Minerals, Metals and Materials Series | 2017 | 9 |