| # | Title | Journal | Year | Citations |
|---|
|
| 1 | Review of substrate-integrated waveguide circuits and antennas | IET Microwaves, Antennas and Propagation | 2011 | 1,089 |
| 2 | Design and experimental verification of ridge gap waveguide in bed of nails for parallel-plate mode suppression | IET Microwaves, Antennas and Propagation | 2011 | 319 |
| 3 | Numerical studies of bandwidth of parallel-plate cut-off realised by a bed of nails, corrugations and mushroom-type electromagnetic bandgap for use in gap waveguides | IET Microwaves, Antennas and Propagation | 2011 | 217 |
| 4 | Millimetre‐wave T‐shaped MIMO antenna with defected ground structures for 5G cellular networks | IET Microwaves, Antennas and Propagation | 2018 | 187 |
| 5 | Design, characterisation and fabrication of a broadband polarisation‐insensitive multi‐layer circuit analogue absorber | IET Microwaves, Antennas and Propagation | 2016 | 169 |
| 6 | Compact 4G MIMO antenna integrated with a 5G array for current and future mobile handsets | IET Microwaves, Antennas and Propagation | 2017 | 166 |
| 7 | Enhanced two‐antenna structures for universal mobile telecommunications system diversity terminals | IET Microwaves, Antennas and Propagation | 2008 | 164 |
| 8 | Pattern synthesis in time-modulated linear arrays through pulse shifting | IET Microwaves, Antennas and Propagation | 2010 | 164 |
| 9 | Non-line-of-sight identification in ultra-wideband systems based on received signal statistics | IET Microwaves, Antennas and Propagation | 2007 | 151 |
| 10 | Eight‐port orthogonally dual‐polarised MIMO antennas using loop structures for 5G smartphone | IET Microwaves, Antennas and Propagation | 2017 | 147 |
| 11 | Design of an efficient ambient WiFi energy harvesting system | IET Microwaves, Antennas and Propagation | 2012 | 146 |
| 12 | Joint wireless communication and radar sensing systems – state of the art and future prospects | IET Microwaves, Antennas and Propagation | 2013 | 132 |
| 13 | Microwave imaging for brain stroke detection using Born iterative method | IET Microwaves, Antennas and Propagation | 2013 | 130 |
| 14 | Contemporary notes on metamaterials | IET Microwaves, Antennas and Propagation | 2007 | 128 |
| 15 | Half width leaky wave antennas | IET Microwaves, Antennas and Propagation | 2007 | 125 |
| 16 | Study on isolation improvement between closely‐packed patch antenna arrays based on fractal metamaterial electromagnetic bandgap structures | IET Microwaves, Antennas and Propagation | 2018 | 124 |
| 17 | Analytical equivalence between substrate-integrated waveguide and rectangular waveguide | IET Microwaves, Antennas and Propagation | 2008 | 118 |
| 18 | CPW‐fed hexagonal Sierpinski super wideband fractal antenna | IET Microwaves, Antennas and Propagation | 2016 | 114 |
| 19 | 3D‐printed planar graded index lenses | IET Microwaves, Antennas and Propagation | 2016 | 110 |
| 20 | Microstrip patch antenna miniaturisation techniques: a review | IET Microwaves, Antennas and Propagation | 2015 | 109 |
| 21 | Design of a wideband rasorber with a polarisation-sensitive transparent window | IET Microwaves, Antennas and Propagation | 2012 | 108 |
| 22 | Design of frequency reconfigurable multiband compact antenna using two PIN diodes for WLAN/WiMAX applications | IET Microwaves, Antennas and Propagation | 2017 | 108 |
| 23 | Dual resonator 1-D EBG antenna with slot array feed for improved radiation bandwidth | IET Microwaves, Antennas and Propagation | 2007 | 107 |
| 24 | Inkjet printed dipole antennas on textiles for wearable communications | IET Microwaves, Antennas and Propagation | 2013 | 105 |
| 25 | Inkjet‐printed antennas, sensors and circuits on paper substrate | IET Microwaves, Antennas and Propagation | 2013 | 103 |
| 26 | Design and implementation of low sidelobe substrate integrated waveguide longitudinal slot array antennas | IET Microwaves, Antennas and Propagation | 2009 | 98 |
| 27 | Genetic‐based design of a tetra‐band high‐efficiency radio‐frequency energy harvesting system | IET Microwaves, Antennas and Propagation | 2013 | 98 |
| 28 | Design of broadband and tunable terahertz absorbers based on graphene metasurface: equivalent circuit model approach | IET Microwaves, Antennas and Propagation | 2015 | 98 |
| 29 | Dielectric resonator based MIMO antenna system enabling millimetre‐wave mobile devices | IET Microwaves, Antennas and Propagation | 2017 | 98 |
| 30 | Dual‐band MIMO dielectric resonator antenna for WiMAX/WLAN applications | IET Microwaves, Antennas and Propagation | 2017 | 97 |
| 31 | Design of fractal patch antenna for size and radar cross-section reduction | IET Microwaves, Antennas and Propagation | 2010 | 92 |
| 32 | Systematic design method of a mobile multiple antenna system using the theory of characteristic modes | IET Microwaves, Antennas and Propagation | 2014 | 90 |
| 33 | Design of ultra‐compact UWB antenna with band‐notched characteristics for MIMO applications | IET Microwaves, Antennas and Propagation | 2018 | 90 |
| 34 | Genetic algorithm (GA)-enhanced almost difference set (ADS)-based approach for array thinning | IET Microwaves, Antennas and Propagation | 2011 | 89 |
| 35 | Decoupled frequency diverse array range–angle‐dependent beampattern synthesis using non‐linearly increasing frequency offsets | IET Microwaves, Antennas and Propagation | 2016 | 89 |
| 36 | Ultrawide-band printed monopole antenna with band-notch filter | IET Microwaves, Antennas and Propagation | 2007 | 87 |
| 37 | Comparison of frequency-selective screen-based linear to circular split-ring polarisation convertors | IET Microwaves, Antennas and Propagation | 2010 | 87 |
| 38 | Printed monopole antenna with tapered feed line, feed region and patch for super wideband applications | IET Microwaves, Antennas and Propagation | 2014 | 87 |
| 39 | Design of reconfigurable antennas based on an L-shaped slot and PIN diodes for compact wireless devices | IET Microwaves, Antennas and Propagation | 2009 | 86 |
| 40 | Defected ground structure (DGS)‐integrated rectangular microstrip patch for improved polarisation purity with wide impedance bandwidth | IET Microwaves, Antennas and Propagation | 2014 | 86 |
| 41 | Compact coplanar waveguide-fed ultra-wideband monopole-like slot antenna | IET Microwaves, Antennas and Propagation | 2009 | 85 |
| 42 | Dual-band matching technique based on dual-characteristic impedance transformers for dual-band power amplifiers design | IET Microwaves, Antennas and Propagation | 2011 | 85 |
| 43 | Dual-band CPW-fed cross-slot monopole antenna for WLAN operation | IET Microwaves, Antennas and Propagation | 2007 | 84 |
| 44 | Study of Q ‐factors of ridge and groove gap waveguide resonators | IET Microwaves, Antennas and Propagation | 2013 | 83 |
| 45 | Compact ultra‐wideband diversity antenna with a floating parasitic digitated decoupling structure | IET Microwaves, Antennas and Propagation | 2014 | 83 |
| 46 | At and below the Chu limit: passive and active broad bandwidth metamaterial-based electrically small antennas | IET Microwaves, Antennas and Propagation | 2007 | 82 |
| 47 | Mutual coupling suppression in microstrip array using defected ground structure | IET Microwaves, Antennas and Propagation | 2011 | 82 |
| 48 | Isolation enhancement of densely packed array antennas with periodic MTM‐photonic bandgap for SAR and MIMO systems | IET Microwaves, Antennas and Propagation | 2020 | 82 |
| 49 | Wide angle impedance matching metamaterials for waveguide-fed phased-array antennas | IET Microwaves, Antennas and Propagation | 2010 | 79 |
| 50 | Compact wearable MIMO antenna with improved port isolation for ultra‐wideband applications | IET Microwaves, Antennas and Propagation | 2019 | 79 |
