# | Title | Journal | Year | Citations |
---|
1 | A Theory of Post-Stall Transients in Axial Compression Systems: Part I—Development of Equations | Journal of Engineering for Gas Turbines and Power | 1986 | 684 |
2 | The IAPWS Industrial Formulation 1997 for the Thermodynamic Properties of Water and Steam | Journal of Engineering for Gas Turbines and Power | 2000 | 647 |
3 | Biodiesel Development and Characterization for Use as a Fuel in Compression Ignition Engines | Journal of Engineering for Gas Turbines and Power | 2001 | 409 |
4 | Combined-Cycle System With Novel Bottoming Cycle | Journal of Engineering for Gas Turbines and Power | 1984 | 355 |
5 | Recent Progress in the Understanding of Basic Aspects of Secondary Flows in Turbine Blade Passages | Journal of Engineering for Gas Turbines and Power | 1985 | 353 |
6 | Using Hydrogen as Gas Turbine Fuel | Journal of Engineering for Gas Turbines and Power | 2005 | 325 |
7 | Heat Transfer Enhancement in Channels With Turbulence Promoters | Journal of Engineering for Gas Turbines and Power | 1985 | 321 |
8 | Fuel-Cooled Thermal Management for Advanced Aeroengines | Journal of Engineering for Gas Turbines and Power | 2004 | 310 |
9 | A Mechanism of Combustion Instability in Lean Premixed Gas Turbine Combustors | Journal of Engineering for Gas Turbines and Power | 2001 | 296 |
10 | Rich-Catalytic Lean-Burn Combustion for Low-Single-Digit NOx Gas Turbines | Journal of Engineering for Gas Turbines and Power | 2005 | 277 |
11 | A Reduced-Order Model of Mistuning Using a Subset of Nominal System Modes | Journal of Engineering for Gas Turbines and Power | 2001 | 275 |
12 | Organic Rankine Cycle Power Systems: From the Concept to Current Technology, Applications, and an Outlook to the Future | Journal of Engineering for Gas Turbines and Power | 2015 | 272 |
13 | Advanced Catalytic Pilot for Low NOx Industrial Gas Turbines | Journal of Engineering for Gas Turbines and Power | 2003 | 262 |
14 | Flutter and Resonant Vibration Characteristics of Engine Blades | Journal of Engineering for Gas Turbines and Power | 1997 | 259 |
15 | Internal Reforming Solid Oxide Fuel Cell-Gas Turbine Combined Cycles (IRSOFC-GT): Part A—Cell Model and Cycle Thermodynamic Analysis | Journal of Engineering for Gas Turbines and Power | 2000 | 254 |
16 | Field Demonstration of a 1.5 MW Industrial Gas Turbine With a Low Emissions Catalytic Combustion System | Journal of Engineering for Gas Turbines and Power | 2001 | 253 |
17 | A Theory of Post-Stall Transients in Axial Compression Systems: Part II—Application | Journal of Engineering for Gas Turbines and Power | 1986 | 249 |
18 | Hydrocarbon Fuel Cooling Technologies for Advanced Propulsion | Journal of Engineering for Gas Turbines and Power | 1997 | 243 |
19 | Combustion in Gas Fueled Compression: Ignition Engines of the Dual Fuel Type | Journal of Engineering for Gas Turbines and Power | 2003 | 236 |
20 | Fuel Flexibility Influences on Premixed Combustor Blowout, Flashback, Autoignition, and Stability | Journal of Engineering for Gas Turbines and Power | 2008 | 233 |
21 | Performance Deterioration in Industrial Gas Turbines | Journal of Engineering for Gas Turbines and Power | 1992 | 228 |
22 | Millimeter-Scale, Micro-Electro-Mechanical Systems Gas Turbine Engines | Journal of Engineering for Gas Turbines and Power | 2004 | 226 |
23 | Exergy Analysis: Principles and Practice | Journal of Engineering for Gas Turbines and Power | 1994 | 223 |
24 | Review of Power Cylinder Friction for Diesel Engines | Journal of Engineering for Gas Turbines and Power | 2000 | 210 |
25 | Gas Turbine Engine Health Management: Past, Present, and Future Trends | Journal of Engineering for Gas Turbines and Power | 2014 | 207 |
26 | Modeling Diesel Spray Flame Liftoff, Sooting Tendency, and NOx Emissions Using Detailed Chemistry With Phenomenological Soot Model | Journal of Engineering for Gas Turbines and Power | 2007 | 197 |
27 | Impact of Swirl Fluctuations on the Flame Response of a Perfectly Premixed Swirl Burner | Journal of Engineering for Gas Turbines and Power | 2010 | 196 |
28 | Component-Mode-Based Reduced Order Modeling Techniques for Mistuned Bladed Disks—Part I: Theoretical Models | Journal of Engineering for Gas Turbines and Power | 2001 | 192 |
29 | Comparisons of Diesel Spray Liquid Penetration and Vapor Fuel Distributions With In-Cylinder Optical Measurements | Journal of Engineering for Gas Turbines and Power | 2000 | 191 |
30 | A Predictive Ignition Delay Correlation Under Steady-State and Transient Operation of a Direct Injection Diesel Engine | Journal of Engineering for Gas Turbines and Power | 2003 | 189 |
31 | A Comparison of Ethanol and Butanol as Oxygenates Using a Direct-Injection, Spark-Ignition Engine | Journal of Engineering for Gas Turbines and Power | 2009 | 185 |
32 | Laminar Flame Speed and Ignition Delay Time Data for the Kinetic Modeling of Hydrogen and Syngas Fuel Blends | Journal of Engineering for Gas Turbines and Power | 2013 | 181 |
33 | Loss Reduction in Axial-Flow Compressors Through Low-Speed Model Testing | Journal of Engineering for Gas Turbines and Power | 1985 | 180 |
34 | The Role of Fuel Preparation in Low-Emission Combustion | Journal of Engineering for Gas Turbines and Power | 1995 | 176 |
35 | Degradation in Gas Turbine Systems | Journal of Engineering for Gas Turbines and Power | 2001 | 176 |
36 | Influence of the Combustor Aerodynamics on Combustion Instabilities From Equivalence Ratio Fluctuations | Journal of Engineering for Gas Turbines and Power | 2003 | 176 |
37 | Deposition of Volcanic Materials in the Hot Sections of Two Gas Turbine Engines | Journal of Engineering for Gas Turbines and Power | 1993 | 175 |
38 | An Efficient Computational Model for Premixed Turbulent Combustion at High Reynolds Numbers Based on a Turbulent Flame Speed Closure | Journal of Engineering for Gas Turbines and Power | 1998 | 170 |
39 | The Evolution of Thermal Barrier Coatings in Gas Turbine Engine Applications | Journal of Engineering for Gas Turbines and Power | 1994 | 169 |
40 | Cooling Tower Performance Evaluation: Merkel, Poppe, and e-NTU Methods of Analysis | Journal of Engineering for Gas Turbines and Power | 2005 | 168 |
41 | Effects of Pin Shape and Array Orientation on Heat Transfer and Pressure Loss in Pin Fin Arrays | Journal of Engineering for Gas Turbines and Power | 1984 | 162 |
42 | Measurement of Transfer Matrices and Source Terms of Premixed Flames | Journal of Engineering for Gas Turbines and Power | 2002 | 160 |
43 | Variable Composition Hydrogen/Natural Gas Mixtures for Increased Engine Efficiency and Decreased Emissions | Journal of Engineering for Gas Turbines and Power | 2000 | 159 |
44 | Limitations on Gas Turbine Performance Imposed by Large Turbine Cooling Flows | Journal of Engineering for Gas Turbines and Power | 2001 | 157 |
45 | Adaptive Simulation of Gas Turbine Performance | Journal of Engineering for Gas Turbines and Power | 1990 | 156 |
46 | The Use of Kalman Filter and Neural Network Methodologies in Gas Turbine Performance Diagnostics: A Comparative Study | Journal of Engineering for Gas Turbines and Power | 2003 | 152 |
47 | Behavior of Tip Leakage Flow Behind an Axial Compressor Rotor | Journal of Engineering for Gas Turbines and Power | 1986 | 149 |
48 | Channel Height Effect on Heat Transfer and Friction in a Dimpled Passage | Journal of Engineering for Gas Turbines and Power | 2000 | 149 |
49 | Laminar Flame Speed Measurements and Modeling of Pure Alkanes and Alkane Blends at Elevated Pressures | Journal of Engineering for Gas Turbines and Power | 2011 | 149 |
50 | Semianalytical Correlations for NOx, CO, and UHC Emissions | Journal of Engineering for Gas Turbines and Power | 1993 | 146 |