1.7(top 50%)
impact factor
8.9K(top 2%)
papers
182.6K(top 2%)
citations
123(top 5%)
h-index
1.7(top 50%)
impact factor
9.2K
all documents
192.3K
doc citations
180(top 5%)
g-index

Top Articles

#TitleJournalYearCitations
1Supra-Ductile and High-Strength Manganese-TRIP/TWIP Steels for High Energy Absorption Purposes.ISIJ International2003864
2Advances in Physical Metallurgy and Processing of Steels. Strengthening Mechanisms of Creep Resistant Tempered Martensitic Steel.ISIJ International2001617
3Five Decades of the Zener Equation.ISIJ International1998579
4Neural Networks in Materials Science.ISIJ International1999546
5State of the Art in Evaluation and Control of Steel Cleanliness.ISIJ International2003513
6Development of shape memory alloys.ISIJ International1989449
7Advances in Physical Metallurgy and Processing of Steels. History of Power Plants and Progress in Heat Resistant Steels.ISIJ International2001449
8Development of High Strength Hot-rolled Sheet Steel Consisting of Ferrite and Nanometer-sized CarbidesISIJ International2004449
9Acceleration of Low-temperature BainiteISIJ International2003416
10Initiation of Dynamic Recrystallization in Constant Strain Rate Hot DeformationISIJ International2003385
11Prevention of Hydrogen Embrittlement in SteelsISIJ International2016381
12Effects of Volume Fraction and Stability of Retained Austenite on Ductility of TRIP-aided Dual-phase Steels.ISIJ International1992375
13Decomposition of Austenite in Austenitic Stainless SteelsISIJ International2002361
14A Mathematical Model to Predict the Mechanical Properties of Hot Rolled C-Mn and Microalloyed Steels.ISIJ International1992359
15Development of Hard BainiteISIJ International2003343
16The Influence of Structure on the Physico-chemical Properties of Slags.ISIJ International1993336
17Ferritic Microstructures in Continuously Cooled Low- and Ultralow-carbon Steels.ISIJ International1995329
18Effects of alloying additions on Fe-Mn-Si shape memory alloys.ISIJ International1990323
19Control of MgO·Al2O3 Spinel Inclusions in Stainless SteelsISIJ International2010317
20Dislocation Density within Lath Martensite in Fe-C and Fe-Ni AlloysISIJ International2003306
21Hydrogen in Trapping States Innocuous to Environmental Degradation of High-strength SteelsISIJ International2003280
22Localized Deformation due to Portevin–LeChatelier Effect in 18Mn–0.6C TWIP Austenitic SteelISIJ International2007279
23Modelling Microstructure and Its Effects during Multipass Hot Rolling.ISIJ International1992278
24Reversion Mechanism from Deformation Induced Martensite to Austenite in Metastable Austenitic Stainless Steels.ISIJ International1991275
25The Influence of Composition on the Hot Ductility of Steels and to the Problem of Transverse Cracking.ISIJ International1999270
26Effects of deformation induced phase transformation and twinning on the mechanical properties of austenitic Fe-Mn-Al alloys.ISIJ International1989268
27On the Role of Non-metallic Inclusions in the Nucleation of Acicular Ferrite in SteelsISIJ International2009266
28The Influence of the Substitution of Si by Al on the Properties of Cold Rolled C-Mn-Si TRIP Steels.ISIJ International1999264
29Ultra-high-strength Bainitic SteelsISIJ International2005256
30The Physical and Mathematical Modelling of Gas Stirred Ladle Systems.ISIJ International1995255
31Comparison of the Dislocation Density in Martensitic Steels Evaluated by Some X-ray Diffraction MethodsISIJ International2010255
32Our Understanding of Macrosegregation. Past and Present.ISIJ International2000254
33Effect of Austenite Grain Size on the Morphology and Crystallography of Lath Martensite in Low Carbon SteelsISIJ International2005247
34Thermodynamics on Control of Inclusions Composition in Ultra-clean Steels.ISIJ International1996241
35Role of Eta-carbide Precipitations in the Wear Resistance Improvements of Fe-12Cr-Mo-V-1.4C Tool Steel by Cryogenic Treatment.ISIJ International1994236
36The Role of Mould Fluxes in Continuous Casting-So Simple Yet So ComplexISIJ International2003236
37Advances in Physical Metallurgy and Processing of Steels. Physical Metallurgy of Modern High Strength Steel Sheets.ISIJ International2001232
38High Nitrogen Steels. Nickel Free High Nitrogen Austenitic Steels.ISIJ International1996230
39Effects of Microstructure on Stretch-flange-formability of 980 MPa Grade Cold-rolled Ultra High Strength Steel SheetsISIJ International2004227
40Annealing of Cold-worked Austenitic Stainless Steels.ISIJ International2003221
41Retained Austenite Characteristics and Tensile Properties in a TRIP Type Bainitic Sheet Steel.ISIJ International2000219
42"In-situ" Observation of Collision, Agglomeration and Cluster Formation of Alumina Inclusion Particles on Steel Melts.ISIJ International1997218
43Effects of Second Phase Morphology on RetainedAustenite Morphology and Tensile Properties in a TRIP-aided Dual-phase Steel Sheet.ISIJ International1993213
44Advances in Physical Metallurgy and Processing of Steels. Function of Hydrogen in Embrittlement of High-strength Steels.ISIJ International2001213
45Mathematical Modeling of Iron and Steel Making Processes. Mathematical Modeling of Fluid Flow in Continuous Casting.ISIJ International2001208
46Image Quality Analysis: A New Method of Characterizing MicrostructuresISIJ International2005201
47Texture control in the production of grain oriented silicon steels.ISIJ International1989199
48Precipitation Kinetics and Strengthening of a Fe-0.8wt%Cu Alloy.ISIJ International2001198
49Advances in Physical Metallurgy and Processing of Steels. Design of Ferritic Creep-resistant Steels.ISIJ International2001198
50Effects of Heat Input and Martensite on HAZ Softening in Laser Welding of Dual Phase SteelsISIJ International2008197