| # | Title | Journal | Year | Citations |
|---|
| 1 | The mechanical properties of fly ash-based geopolymer concrete with alkaline activators | Construction and Building Materials | 2013 | 595 |
| 2 | Adsorption of selected endocrine disrupting compounds and pharmaceuticals on activated biochars | Journal of Hazardous Materials | 2013 | 294 |
| 3 | Hexavalent chromium removal by various adsorbents: Powdered activated carbon, chitosan, and single/multi-walled carbon nanotubes | Separation and Purification Technology | 2013 | 287 |
| 4 | Alkali–silica reactivity of cementitious materials using ferro-nickel slag fine aggregates produced in different cooling conditions | Construction and Building Materials | 2015 | 100 |
| 5 | Removal of humic and tannic acids by adsorption–coagulation combined systems with activated biochar | Journal of Hazardous Materials | 2015 | 78 |
| 6 | Determination of micropollutants in combined sewer overflows and their removal in a wastewater treatment plant (Seoul, South Korea) | Environmental Monitoring and Assessment | 2014 | 73 |
| 7 | Characteristics and fate of natural organic matter during UV oxidation processes | Chemosphere | 2017 | 69 |
| 8 | Mercury intrusion porosimetry characterization of micropore structures of high-strength cement pastes incorporating high volume ground granulated blast-furnace slag | Construction and Building Materials | 2017 | 67 |
| 9 | Global Surface Temperature: A New Insight | Climate | 2021 | 66 |
| 10 | Prediction of residual stresses in high strength carbon steel pipe weld considering solid-state phase transformation effects | Computers and Structures | 2011 | 65 |
| 11 | Rapid self-sealing of cracks in cementitious materials incorporating superabsorbent polymers | Construction and Building Materials | 2017 | 65 |
| 12 | Temperature fields and residual stress distributions in dissimilar steel butt welds between carbon and stainless steels | Applied Thermal Engineering | 2012 | 64 |
| 13 | Effect of weld geometry on the fatigue life of non-load-carrying fillet welded cruciform joints | Engineering Failure Analysis | 2009 | 60 |
| 14 | Equivalent material model of corroded prestressing steel strand | Journal of Materials Research and Technology | 2019 | 60 |
| 15 | Removal of acetaminophen and naproxen by combined coagulation and adsorption using biochar: influence of combined sewer overflow components | Environmental Science and Pollution Research | 2015 | 58 |
| 16 | Fractal Characteristics of Pore Structures in GGBFS-based Cement Pastes | Applied Surface Science | 2018 | 58 |
| 17 | Numerical analysis of residual stresses in welds of similar or dissimilar steel weldments under superimposed tensile loads | Computational Materials Science | 2007 | 55 |
| 18 | Uncertainty quantification of granular computing-neural network model for prediction of pollutant longitudinal dispersion coefficient in aquatic streams | Scientific Reports | 2022 | 54 |
| 19 | Forecast of rainfall distribution based on fixed sliding window long short-term memory | Engineering Applications of Computational Fluid Mechanics | 2022 | 52 |
| 20 | Residual stresses and fracture mechanics analysis of a crack in welds of high strength steels | Engineering Fracture Mechanics | 2007 | 51 |
| 21 | Dual use of tantalum disulfides as hole and electron extraction layers in organic photovoltaic cells | Physical Chemistry Chemical Physics | 2014 | 51 |
| 22 | Time Series Prediction of Wastewater Flow Rate by Bidirectional LSTM Deep Learning | International Journal of Control, Automation and Systems | 2020 | 46 |
| 23 | The application of Recycled Concrete Aggregate (RCA) for Hot Mix Asphalt (HMA) base layer aggregate | KSCE Journal of Civil Engineering | 2011 | 45 |
| 24 | Tungsten Trioxide (WO3)-assisted Photocatalytic Degradation of Amoxicillin by Simulated Solar Irradiation | Scientific Reports | 2019 | 44 |
| 25 | Pavement crack detection and classification based on fusion feature of LBP and PCA with SVM | International Journal of Pavement Engineering | 2022 | 43 |
| 26 | A non-threshold model to estimate carcinogenic risk of nitrate-nitrite in drinking water | Journal of Cleaner Production | 2022 | 43 |
| 27 | Occurrence of endocrine disrupting compounds and pharmaceuticals in 11 WWTPs in Seoul, Korea | KSCE Journal of Civil Engineering | 2011 | 42 |
| 28 | Three-dimensional flow characteristics around permeable submerged breakwaters with open inlet | Ocean Engineering | 2012 | 42 |
| 29 | Handling non-convex heat-power feasible region in combined heat and power economic dispatch | International Journal of Electrical Power and Energy Systems | 2012 | 41 |
| 30 | Finite element analysis of the residual stresses in T-joint fillet welds made of similar and dissimilar steels | International Journal of Advanced Manufacturing Technology | 2009 | 39 |
| 31 | Characteristics of intracellular algogenic organic matter and its reactivity with hydroxyl radicals | Water Research | 2018 | 39 |
| 32 | Stress concentration factors of N-joints of concrete-filled tubes subjected to axial loads | International Journal of Steel Structures | 2014 | 38 |
| 33 | Characterization of compliant polymer concretes for rapid repair of runways | Construction and Building Materials | 2015 | 37 |
| 34 | Finite element computation of fatigue growth rates for mode I cracks subjected to welding residual stresses | Engineering Fracture Mechanics | 2011 | 36 |
| 35 | Vibration and dynamic buckling of shear beam-columns on elastic foundation under moving harmonic loads | International Journal of Solids and Structures | 2006 | 34 |
| 36 | Tensile strength characteristics of contaminated and compacted sand-bentonite mixtures | Environmental Geology | 2007 | 34 |
| 37 | Characterization of a microbial community capable of reducing perchlorate and nitrate in high salinity | Biotechnology Letters | 2009 | 33 |
| 38 | Modelling of chloride diffusivity in concrete considering effect of aggregates | Construction and Building Materials | 2017 | 32 |
| 39 | Moisture-dependent piezoresistive responses of CNT-embedded cementitious composites | Composite Structures | 2017 | 32 |
| 40 | Synergistic effect of hydrogen peroxide production and sonochemiluminescence under dual frequency ultrasound irradiation | Ultrasonics Sonochemistry | 2011 | 30 |
| 41 | Assessment of Mechanical Properties of Corroded Prestressing Strands | Applied Sciences (Switzerland) | 2020 | 30 |
| 42 | Evaluation and comparison of precipitation estimates and hydrologic utility of CHIRPS, TRMM 3B42 V7 and PERSIANN-CDR products in various climate regimes | Atmospheric Research | 2022 | 29 |
| 43 | Modified harmony search optimization for constrained design problems | Expert Systems With Applications | 2012 | 28 |
| 44 | Instant bridge visual inspection using an unmanned aerial vehicle by image capturing and geo-tagging system and deep convolutional neural network | Structural Health Monitoring | 2021 | 28 |
| 45 | Correlation between the Compressive Strength and Ultrasonic Pulse Velocity of Cement Mortars Blended with Silica Fume: An Analysis of Microstructure and Hydration Kinetics | Materials | 2021 | 28 |
| 46 | Assessment on the Effectiveness of Urban Stormwater Management | Water (Switzerland) | 2021 | 27 |
| 47 | Noise barrier optimization using a simulated annealing algorithm | Applied Acoustics | 2009 | 26 |
| 48 | Effect of dispersibility of carbon nanotubes by silica fume on material properties of cement mortars: Hydration, pore structure, mechanical properties, self-desiccation, and autogenous shrinkage | Construction and Building Materials | 2020 | 25 |
| 49 | Solar radiation estimation in different climates with meteorological variables using Bayesian model averaging and new soft computing models | Energy Reports | 2021 | 25 |
| 50 | Investigation of solid waste soil as road construction material | Environmental Geology | 2003 | 24 |
