# | Title | Journal | Year | Citations |
---|
1 | Nitrogen‐Doped Mesoporous Carbon Promoted Chemical Adsorption of Sulfur and Fabrication of High‐Areal‐Capacity Sulfur Cathode with Exceptional Cycling Stability for Lithium‐Sulfur Batteries | Advanced Functional Materials | 2014 | 904 |
2 | Photoinduced activation of CO2 on Ti-based heterogeneous catalysts: Current state, chemical physics-based insights and outlook | Energy and Environmental Science | 2009 | 653 |
3 | “Molecular Basket” Sorbents for Separation of CO2 and H2S from Various Gas Streams | Journal of the American Chemical Society | 2009 | 497 |
4 | A review on wearable photoplethysmography sensors and their potential future applications in health care | International Journal of Biosensors & Bioelectronics | 2018 | 359 |
5 | Changes in permeability caused by transient stresses: Field observations, experiments, and mechanisms | Reviews of Geophysics | 2012 | 340 |
6 | Characterization of Structural and Surface Properties of Nanocrystalline TiO2−CeO2 Mixed Oxides by XRD, XPS, TPR, and TPD | Journal of Physical Chemistry C | 2009 | 323 |
7 | Highly Active Catalysts of Gold Nanoparticles Supported on Three‐Dimensionally Ordered Macroporous LaFeO3 for Soot Oxidation | Angewandte Chemie - International Edition | 2011 | 306 |
8 | Clean liquid fuels from direct coal liquefaction: chemistry, catalysis, technological status and challenges | Energy and Environmental Science | 2011 | 305 |
9 | Impact of fuel formulation on the nanostructure and reactivity of diesel soot | Combustion and Flame | 2012 | 249 |
10 | Common failures of demand response | Energy | 2011 | 236 |
11 | Gas diffusion in coal particles: A review of mathematical models and their applications | Fuel | 2019 | 214 |
12 | A new hard rock TBM performance prediction model for project planning | Tunnelling and Underground Space Technology | 2011 | 207 |
13 | A comparative evaluation of coal specific surface area by CO2 and N2 adsorption and its influence on CH4 adsorption capacity at different pore sizes | Fuel | 2016 | 202 |
14 | Permeability evolution during progressive deformation of intact coal and implications for instability in underground coal seams | International Journal of Rock Mechanics and Minings Sciences | 2013 | 201 |
15 | Dual poroelastic response of a coal seam to CO2 injection | International Journal of Greenhouse Gas Control | 2010 | 193 |
16 | Active Sites in Graphene and the Mechanism of CO2 Formation in Carbon Oxidation | Journal of the American Chemical Society | 2009 | 187 |
17 | A model of coal–gas interaction under variable temperatures | International Journal of Coal Geology | 2011 | 186 |
18 | Permeability evolution in fractured coal — Combining triaxial confinement with X-ray computed tomography, acoustic emission and ultrasonic techniques | International Journal of Coal Geology | 2014 | 178 |
19 | Performance prediction of hard rock TBM using Rock Mass Rating (RMR) system | Tunnelling and Underground Space Technology | 2010 | 176 |
20 | Nanoengineered PtCo and PtNi Catalysts for Oxygen Reduction Reaction: An Assessment of the Structural and Electrocatalytic Properties | Journal of Physical Chemistry C | 2011 | 173 |
21 | Mechanistic Understanding of Alloy Effect and Water Promotion for Pd-Cu Bimetallic Catalysts in CO2 Hydrogenation to Methanol | ACS Catalysis | 2018 | 171 |
22 | Carbon Capture From Flue Gas and the Atmosphere: A Perspective | Frontiers in Energy Research | 2020 | 165 |
23 | Highly active MoS2, CoMoS2 and NiMoS2 unsupported catalysts prepared by hydrothermal synthesis for hydrodesulfurization of 4,6-dimethyldibenzothiophene | Catalysis Today | 2008 | 160 |
24 | Pore Structure Characterization of Coal by Synchrotron Small-Angle X-ray Scattering and Transmission Electron Microscopy | Energy & Fuels | 2014 | 160 |
25 | Evolution of coal permeability from stress-controlled to displacement-controlled swelling conditions | Fuel | 2011 | 156 |
26 | Mesoporous-molecular-sieve-supported nickel sorbents for adsorptive desulfurization of commercial ultra-low-sulfur diesel fuel | Applied Catalysis B: Environmental | 2011 | 147 |
27 | Numerical simulation of hydraulic fracture propagation in naturally fractured formations using the cohesive zone model | Journal of Petroleum Science and Engineering | 2018 | 145 |
28 | Effect of the effective stress coefficient and sorption-induced strain on the evolution of coal permeability: Experimental observations | International Journal of Greenhouse Gas Control | 2011 | 143 |
29 | Maximizing the number of oxygen-containing functional groups on activated carbon by using ammonium persulfate and improving the temperature-programmed desorption characterization of carbon surface chemistry | Carbon | 2011 | 141 |
30 | Performance prediction of hard rock Tunnel Boring Machines (TBMs) in difficult ground | Tunnelling and Underground Space Technology | 2016 | 140 |
31 | Characterization of CeO2-supported Cu–Pd bimetallic catalyst for the oxygen-assisted water–gas shift reaction | Journal of Catalysis | 2008 | 138 |
32 | Evaluation of stress-controlled coal swelling processes | International Journal of Coal Geology | 2010 | 137 |
33 | Linking gas-sorption induced changes in coal permeability to directional strains through a modulus reduction ratio | International Journal of Coal Geology | 2010 | 136 |
34 | Influence of the effective stress coefficient and sorption-induced strain on the evolution of coal permeability: Model development and analysis | International Journal of Greenhouse Gas Control | 2012 | 136 |
35 | TBM Performance Analysis in Pyroclastic Rocks: A Case History of Karaj Water Conveyance Tunnel | Rock Mechanics and Rock Engineering | 2010 | 135 |
36 | Development of anisotropic permeability during coalbed methane production | Journal of Natural Gas Science and Engineering | 2010 | 135 |
37 | Quasi-three-dimensional physical model tests on a cavern complex under high in-situ stresses | International Journal of Rock Mechanics and Minings Sciences | 2011 | 132 |
38 | A Centrality Measure for Electrical Networks | | 2008 | 127 |
39 | Numerical simulations examining the relationship between wall-roughness and fluid flow in rock fractures | International Journal of Rock Mechanics and Minings Sciences | 2010 | 127 |
40 | A dual poroelastic model for CO2-enhanced coalbed methane recovery | International Journal of Coal Geology | 2011 | 124 |
41 | Pore structure characterization of coal by synchrotron radiation nano-CT | Fuel | 2018 | 124 |
42 | Fingerprinting soot (towards source identification): Physical structure and chemical composition | Journal of Aerosol Science | 2010 | 120 |
43 | Frictional stability‐permeability relationships for fractures in shales | Journal of Geophysical Research: Solid Earth | 2017 | 120 |
44 | Analysis of fatalities and injuries involving mining equipment | Journal of Safety Research | 2007 | 117 |
45 | Microwave-assisted preparation of nitrogen-doped biochars by ammonium acetate activation for adsorption of acid red 18 | Applied Surface Science | 2018 | 116 |
46 | Sorption Capacity and Sorption Kinetic Measurements of CO2and CH4in Confined and Unconfined Bituminous Coal | Energy & Fuels | 2009 | 114 |
47 | Combustion of Syngas in Internal Combustion Engines | Combustion Science and Technology | 2008 | 112 |
48 | Surface characteristics and permeability enhancement of shale fractures due to water and supercritical carbon dioxide fracturing | Journal of Petroleum Science and Engineering | 2018 | 112 |
49 | Impact of engine operating modes and combustion phasing on the reactivity of diesel soot | Combustion and Flame | 2013 | 111 |
50 | Coal seam porosity and fracture heterogeneity of macrolithotypes in the Hancheng Block, eastern margin, Ordos Basin, China | International Journal of Coal Geology | 2016 | 108 |