# | Title | Journal | Year | Citations |
---|
1 | Friction stir welding/processing of metals and alloys: A comprehensive review on microstructural evolution | Progress in Materials Science | 2021 | 436 |
2 | Microstructures and mechanical properties of Al/Al2O3 surface nano-composite layer produced by friction stir processing | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2009 | 332 |
3 | Dynamic recrystallization in AZ31 magnesium alloy | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2007 | 314 |
4 | Experimental investigation of explosive welding of cp-titanium/AISI 304 stainless steel | Materials & Design | 2009 | 291 |
5 | Recovery of lithium and cobalt from spent lithium ion batteries (LIBs) using organic acids as leaching reagents: A review | Resources, Conservation and Recycling | 2018 | 282 |
6 | Recovery of lithium and cobalt from spent lithium-ion batteries using organic acids: Process optimization and kinetic aspects | Waste Management | 2017 | 248 |
7 | Utilizing Lemon Balm extract as an effective green corrosion inhibitor for mild steel in 1M HCl solution: A detailed experimental, molecular dynamics, Monte Carlo and quantum mechanics study | Journal of the Taiwan Institute of Chemical Engineers | 2019 | 242 |
8 | A comparative study on hot corrosion resistance of three types of thermal barrier coatings: YSZ, YSZ+Al2O3 and YSZ/Al2O3 | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2008 | 196 |
9 | Synthesis and structural characterization of Al–B4C nano-composite powders by mechanical alloying | Journal of Alloys and Compounds | 2009 | 187 |
10 | Microstructure and mechanical properties of aluminum alloy matrix composite reinforced with nano-particle MgO | Journal of Alloys and Compounds | 2009 | 178 |
11 | Leaching of vanadium from LD converter slag using sulfuric acid | Hydrometallurgy | 2010 | 172 |
12 | Carbon Nanotubes: Smart Drug/Gene Delivery Carriers | International Journal of Nanomedicine | 2021 | 168 |
13 | The flow behavior modeling of cast A356 aluminum alloy at elevated temperatures considering the effect of strain | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2012 | 163 |
14 | Electrochemical impedance spectroscopy and electrochemical noise measurements as tools to evaluate corrosion inhibition of azole compounds on stainless steel in acidic media | Corrosion Science | 2013 | 159 |
15 | An investigation into the hot deformation characteristics of 7075 aluminum alloy | Materials & Design | 2011 | 157 |
16 | Investigation on mechanical properties of nano-Al2O3-reinforced aluminum matrix composites | Journal of Composite Materials | 2011 | 156 |
17 | Epoxy-polyamide nanocomposite coating with graphene oxide as cerium nanocontainer generating effective dual active/barrier corrosion protection | Composites Part B: Engineering | 2019 | 154 |
18 | Central composite design (CCD)-Response surface methodology (RSM) of effective electrospinning parameters on PVP-B-Hf hybrid nanofibrous composites for synthesis of HfB2-based composite nanofibers | Composites Part B: Engineering | 2019 | 150 |
19 | Effect of the Graphite Content on the Tribological Behavior of Al/Gr and Al/30SiC/Gr Composites Processed by In Situ Powder Metallurgy (IPM) Method | Tribology Letters | 2011 | 148 |
20 | Artificial neural network modeling to predict the hot deformation behavior of an A356 aluminum alloy | Materials & Design | 2013 | 146 |
21 | Constitutive equations for elevated temperature flow behavior of commercial purity aluminum | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2012 | 142 |
22 | Artificial neural network modeling to predict the high temperature flow behavior of an AZ81 magnesium alloy | Materials & Design | 2012 | 139 |
23 | Constitutive base analysis of a 7075 aluminum alloy during hot compression testing | Materials & Design | 2011 | 138 |
24 | Effect of post-weld heat treatment on the interface microstructure of explosively welded titanium–stainless steel composite | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2008 | 136 |
25 | Corrosion resistance enhancement of Ni–P electroless coatings by incorporation of nano-SiO2 particles | Materials & Design | 2011 | 133 |
26 | Room and high temperature wear behaviors of nickel and cobalt base weld overlay coatings on hot forging dies | Wear | 2007 | 132 |
27 | A review of hot deformation behavior and constitutive models to predict flow stress of high-entropy alloys | Journal of Alloys and Compounds | 2022 | 130 |
28 | Tailoring the microstructure and mechanical properties of AISI 316L austenitic stainless steel via cold rolling and reversion annealing | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2019 | 127 |
29 | Deformation-induced martensite in austenitic stainless steels: A review | Archives of Civil and Mechanical Engineering | 2020 | 127 |
30 | The high temperature flow behavior modeling of AZ81 magnesium alloy considering strain effects | Materials & Design | 2012 | 126 |
31 | Boron carbide reinforced aluminium matrix composite: Physical, mechanical characterization and mathematical modelling | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2016 | 126 |
32 | Wear assessment of Al/Al2O3 nano-composite surface layer produced using friction stir processing | Wear | 2011 | 125 |
33 | Removal of methylene blue from wastewater using ternary nanocomposite aerogel systems: Carboxymethyl cellulose grafted by polyacrylic acid and decorated with graphene oxide | Journal of Hazardous Materials | 2022 | 125 |
34 | Constitutive analysis of Mg–Al–Zn magnesium alloys during hot deformation | Mechanics of Materials | 2014 | 122 |
35 | Separation of oxidized zinc minerals from tailings: Influence of flotation reagents | Minerals Engineering | 2008 | 120 |
36 | The effect of saccharin addition and bath temperature on the grain size of nanocrystalline nickel coatings | Surface and Coatings Technology | 2009 | 120 |
37 | Corrosion behavior of mild steel in H2SO4 solution with 1,4-di [1′-methylene-3′-methyl imidazolium bromide]-benzene as an ionic liquid | Corrosion Science | 2016 | 119 |
38 | Corrosion properties of electrodeposited nanocrystalline and amorphous patterned Ni–W alloy | Materials & Design | 2009 | 116 |
39 | Investigations on the effects of ultrasonic vibrations in the extrusion process | Journal of Materials Processing Technology | 2007 | 115 |
40 | In situ synthesis of polyaniline–camphorsulfonate particles in an epoxy matrix for corrosion protection of mild steel in NaCl solution | Corrosion Science | 2014 | 114 |
41 | Application of mesoporous silica nanocontainers as smart host of corrosion inhibitor in polypyrrole coatings | Corrosion Science | 2014 | 114 |
42 | Fungal bioleaching of WPCBs using Aspergillus niger: Observation, optimization and kinetics | Journal of Environmental Management | 2018 | 114 |
43 | Nano/ultrafine grained austenitic stainless steel through the formation and reversion of deformation-induced martensite: Mechanisms, microstructures, mechanical properties, and TRIP effect | Materials Characterization | 2015 | 113 |
44 | The effects of temperature and pH on the characteristics of corrosion product in CO2 corrosion of grade X70 steel | Materials & Design | 2010 | 112 |
45 | An investigation on effects of heat treatment on corrosion properties of Ni–P electroless nano-coatings | Materials & Design | 2010 | 111 |
46 | Sol–gel derived Al and Ga co-doped ZnO thin films: An optoelectronic study | Applied Surface Science | 2014 | 111 |
47 | Corrosion protection of the reinforcing steels in chloride-laden concrete environment through epoxy/polyaniline–camphorsulfonate nanocomposite coating | Corrosion Science | 2015 | 110 |
48 | Microstructural analysis of YSZ and YSZ/Al2O3 plasma sprayed thermal barrier coatings after high temperature oxidation | Surface and Coatings Technology | 2008 | 106 |
49 | Cladding of aluminum on AISI 304L stainless steel by cold roll bonding: Mechanism, microstructure, and mechanical properties | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2014 | 105 |
50 | Preparation and mechanical properties of SiC-reinforced Al6061 composite by mechanical alloying | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2008 | 104 |