| # | Title | Journal | Year | Citations |
|---|
| 1 | Novel DOPO-based flame retardants in high-performance carbon fibre epoxy composites for aviation | European Polymer Journal | 2011 | 313 |
| 2 | Carbon-nanofibre-reinforced poly(ether ether ketone) composites | Composites Part A: Applied Science and Manufacturing | 2002 | 296 |
| 3 | Microcellular to nanocellular polymer foams: Progress (2004–2015) and future directions – A review | European Polymer Journal | 2015 | 221 |
| 4 | Pyrolysis of epoxy resins and fire behavior of epoxy resin composites flame-retarded with 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide additives | Journal of Applied Polymer Science | 2007 | 200 |
| 5 | Past and present developments in polymer bead foams and bead foaming technology | Polymer | 2015 | 189 |
| 6 | Composites of polyamide 6 and silicate nanotubes of the mineral halloysite: Influence of molecular weight on thermal, mechanical and rheological properties | Polymer | 2010 | 177 |
| 7 | A New Halogen‐Free Flame Retardant Based on 9,10‐Dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide for Epoxy Resins and their Carbon Fiber Composites for the Automotive and Aviation Industries | Macromolecular Materials and Engineering | 2011 | 148 |
| 8 | The relationship between thin film fragmentation and buckle formation: Synchrotron-based in situ studies and two-dimensional stress analysis | Acta Materialia | 2009 | 113 |
| 9 | Carbon fiber-reinforced composites using an epoxy resin matrix modified with reactive liquid rubber and silica nanoparticles | Composites Science and Technology | 2014 | 94 |
| 10 | Reconstructing the Environmental Degradation of Polystyrene by Accelerated Weathering | Environmental Science & Technology | 2021 | 94 |
| 11 | Carbon-nanofibre-reinforced poly(ether ether ketone) fibres | Journal of Materials Science | 2003 | 81 |
| 12 | The effect of hard and soft segment composition and molecular architecture on the morphology and mechanical properties of polystyrene–polyisobutylene thermoplastic elastomeric block copolymers | European Polymer Journal | 2003 | 73 |
| 13 | Controlling Morphology of Injection Molded Structural Foams by Mold Design and Processing Parameters | Journal of Cellular Plastics | 2007 | 73 |
| 14 | Functionalized Graphene and Carbon Materials as Components of Styrene-Butadiene Rubber Nanocomposites Prepared by Aqueous Dispersion Blending | Macromolecular Materials and Engineering | 2014 | 72 |
| 15 | Effect of dispersion and selective localization of carbon nanotubes on rheology and electrical conductivity of polyamide 6 (PA6), Polypropylene (PP), and PA6/PP nanocomposites | Journal of Polymer Science, Part B: Polymer Physics | 2015 | 69 |
| 16 | Fatigue crack propagation behaviour of epoxy resins modified with silica-nanoparticles | Polymer | 2015 | 66 |
| 17 | Manufacturing of thermoplastic composite sandwich structures | Journal of Thermoplastic Composite Materials | 2017 | 61 |
| 18 | A Review on Multifunctional Epoxy-Based Joncryl® ADR Chain Extended Thermoplastics | Polymer Reviews | 2022 | 61 |
| 19 | Poly(lactic acid)/coplasticized thermoplastic starch blend: Effect of plasticizer migration on rheological and mechanical properties | Polymers for Advanced Technologies | 2019 | 53 |
| 20 | Influence of supramolecular additives on foam morphology of injection-molded i-PP | Journal of Cellular Plastics | 2011 | 47 |
| 21 | An investigation on the flexural properties of balsa and polymer foam core sandwich structures: Influence of core type and contour finishing options | Journal of Sandwich Structures and Materials | 2013 | 47 |
| 22 | Preparation of microcellular low-density PMMA nanocomposite foams: Influence of different fillers on the mechanical, rheological and cell morphological properties | Composites Science and Technology | 2015 | 44 |
| 23 | Morphology Formation in PC/ABS Blends during Thermal Processing and the Effect of the Viscosity Ratio of Blend Partners | Materials | 2016 | 44 |
| 24 | Numerical Simulation of Mechanical Properties of Cellular Materials Using Computed Tomography Analysis | Journal of Cellular Plastics | 2009 | 43 |
| 25 | Macromolecular Engineering via Carbocationic Polymerization: Branched Structures, Block Copolymers and Nanostructures | Macromolecular Materials and Engineering | 2001 | 42 |
| 26 | Full-field shear analyses of sandwich core materials using Digital Image Correlation (DIC) | Composites Part B: Engineering | 2015 | 42 |
| 27 | Degradation of low-density polyethylene to nanoplastic particles by accelerated weathering | Science of the Total Environment | 2022 | 42 |
| 28 | Novel phosphorus-containing hardeners with tailored chemical structures for epoxy resins: Synthesis and cured resin properties | Journal of Applied Polymer Science | 2007 | 40 |
| 29 | E-PBT—Bead foaming of poly(butylene terephthalate) by underwater pelletizing | Journal of Cellular Plastics | 2014 | 39 |
| 30 | In situ studies on the cohesive properties of α- and β-Ta layers on polyimide substrates | Acta Materialia | 2011 | 38 |
| 31 | Influence of molar mass and temperature on the dynamics of network formation in polycarbonate/carbon nanotubes composites in oscillatory shear flows | Polymer | 2011 | 38 |
| 32 | Fatigue behaviour of multiblock thermoplastic elastomers. 2. Dynamic creep of poly(aliphatic/aromatic-ester) copolymers | Polymer | 2003 | 37 |
| 33 | Blends of poly(2,6-dimethyl-1,4-phenylene oxide) (PPO) with polystyrene-based thermoplastic rubbers: A comparative study | Polymer | 2007 | 36 |
| 34 | Understanding Melt Rheology and Foamability of Polypropylene-based TPO Blends | Journal of Cellular Plastics | 2008 | 36 |
| 35 | Identification of interface failure mechanisms of metallized glass fibre reinforced composites using acoustic emission analysis | Composites Part B: Engineering | 2014 | 35 |
| 36 | Influence of graphene on the cell morphology and mechanical properties of extruded polystyrene foam | Journal of Cellular Plastics | 2015 | 35 |
| 37 | Influence of Fiber Volume Content on Thermal Conductivity in Transverse and Fiber Direction of Carbon Fiber-Reinforced Epoxy Laminates | Materials | 2019 | 34 |
| 38 | Rheological and crystallisation behaviour of high melt strength polypropylene under gas-loading | Polymer | 2014 | 33 |
| 39 | Polymer Foams Made of Immiscible Polymer Blends Compatibilized by Janus Particles—Effect of Compatibilization on Foam Morphology | Advanced Engineering Materials | 2016 | 33 |
| 40 | Effects of mixing protocol on morphology and properties of PA6/ABS blends compatibilized with MMA‐MA | Journal of Applied Polymer Science | 2016 | 33 |
| 41 | Understanding the Compressive Behavior of Linear and Cross-linked Poly(vinyl chloride) Foams | Journal of Cellular Plastics | 2009 | 32 |
| 42 | Dielectric properties of highly filled thermoplastics for printed circuit boards | Journal of Applied Polymer Science | 2013 | 32 |
| 43 | Properties of copper modified polyamide 12-powders and their potential for the use as laser direct structurable electronic circuit carriers | Additive Manufacturing | 2018 | 31 |
| 44 | Foam 3D Printing of Thermoplastics: A Symbiosis of Additive Manufacturing and Foaming Technology | Advanced Science | 2022 | 30 |
| 45 | Impact of large aspect ratio, shear-stiff, mica-like clay on mechanical behaviour of PMMA/clay nanocomposites | Polymer | 2012 | 29 |
| 46 | Expanded Polycarbonate (EPC)—A New Generation of High-Temperature Engineering Bead Foams | Polymers | 2020 | 29 |
| 47 | Charge storage of electrospun fiber mats of poly(phenylene ether)/polystyrene blends | Polymer Engineering and Science | 2009 | 28 |
| 48 | Extruded Polystyrene Foams with Enhanced Insulation and Mechanical Properties by a Benzene-Trisamide-Based Additive | Polymers | 2019 | 27 |
| 49 | Lightweight Ultra-High-Barrier Liners for Helium and Hydrogen | ACS Nano | 2020 | 26 |
| 50 | Influence of Graphene Oxide on Thermally Induced Shape Memory Behavior of PLA/TPU Blends: Correlation with Morphology, Creep Behavior, Crystallinity, and Dynamic Mechanical Properties | Macromolecular Materials and Engineering | 2021 | 26 |
