| # | Title | Journal | Year | Citations |
|---|
| 1 | Discrete particle simulation of two-dimensional fluidized bed | Powder Technology | 1993 | 2,002 |
| 2 | Lagrangian numerical simulation of plug flow of cohesionless particles in a horizontal pipe | Powder Technology | 1992 | 1,621 |
| 3 | A New Feedback Method for Dynamic Control of Manipulators | Journal of Dynamic Systems, Measurement and Control, Transactions of the ASME | 1981 | 964 |
| 4 | A stable tracking control method for an autonomous mobile robot | | 0 | 962 |
| 5 | RoboCup | | 1997 | 422 |
| 6 | The science and technology of combustion in highly preheated air | Proceedings of the Combustion Institute | 1998 | 360 |
| 7 | Large-eddy simulation of turbulent gas–particle flow in a vertical channel: effect of considering inter-particle collisions | Journal of Fluid Mechanics | 2001 | 323 |
| 8 | Realization of robot motion based on a learning method | IEEE Transactions on Systems, Man, and Cybernetics | 1988 | 242 |
| 9 | Solitary Waves on a Two-Layer Fluid | Journal of the Physical Society of Japan | 1978 | 237 |
| 10 | Turbulence Structure of Particle-Laden Flow in a Vertical Plane Channel Due to Vortex Shedding | JSME International Journal Series B | 2001 | 233 |
| 11 | Yield point of metallic glass | Acta Materialia | 2006 | 231 |
| 12 | Relationship between local geometrical factors and mechanical properties for Cu–Zr amorphous alloys | Intermetallics | 2007 | 201 |
| 13 | Numerical simulation of two-dimensional fluidized beds using the discrete element method (comparison between the two- and three-dimensional models) | Powder Technology | 1998 | 193 |
| 14 | Elastostatically induced structural disordering in amorphous alloys | Acta Materialia | 2008 | 191 |
| 15 | PROPAGATION AND NON-PROPAGATION OF SHORT FATIGUE CRACKS AT A SHARP NOTCH | Fatigue and Fracture of Engineering Materials and Structures | 1983 | 184 |
| 16 | Efficiency and feasibility of product disassembly: A case-based study | CIRP Annals - Manufacturing Technology | 2008 | 181 |
| 17 | Development of a cutting tool with a nano/micro-textured surface—Improvement of anti-adhesive effect by considering the texture patterns | Precision Engineering | 2009 | 179 |
| 18 | Burgers equation with a fractional derivative; hereditary effects on nonlinear acoustic waves | Journal of Fluid Mechanics | 1991 | 175 |
| 19 | Stress and Strain Distribution in Hypertensive and Normotensive Rat Aorta Considering Residual Strain | Journal of Biomechanical Engineering | 1996 | 175 |
| 20 | Cluster patterns in circulating fluidized beds predicted by numerical simulation (discrete particle model versus two-fluid model) | Powder Technology | 1998 | 171 |
| 21 | Atomic packing density and its influence on the properties of Cu–Zr amorphous alloys | Scripta Materialia | 2007 | 165 |
| 22 | Mechanical and Dimensional Adaptation of Rat Aorta to Hypertension | Journal of Biomechanical Engineering | 1994 | 163 |
| 23 | Modelling of small fatigue crack growth interacting with grain boundary | Engineering Fracture Mechanics | 1986 | 160 |
| 24 | Spontaneous structures in three-dimensional bubbling gas-fluidized bed by parallel DEM–CFD coupling simulation | Powder Technology | 2008 | 160 |
| 25 | Multi-scale modeling of dense phase gas–particle flow | Chemical Engineering Science | 2007 | 152 |
| 26 | Interaction between particle clusters and particle-induced turbulence | International Journal of Heat and Fluid Flow | 2002 | 146 |
| 27 | The influence of DEM simulation parameters on the particle behaviour in a V-mixer | Chemical Engineering Science | 2002 | 146 |
| 28 | Steady particulate flows in a horizontal rotating cylinder | Physics of Fluids | 1998 | 142 |
| 29 | Control of a Dynamical Biped Locomotion System for Steady Walking | Journal of Dynamic Systems, Measurement and Control, Transactions of the ASME | 1986 | 140 |
| 30 | Numerical simulation of particulate flow with liquid bridge between particles (simulation of centrifugal tumbling granulator) | Powder Technology | 2000 | 140 |
| 31 | Symmetry-Driven Novel Kondo Effect in a Molecule | Physical Review Letters | 2012 | 138 |
| 32 | Improving anti-adhesion in aluminum alloy cutting by micro stripe texture | Precision Engineering | 2012 | 133 |
| 33 | Performance of cutting tools with dimple textured surfaces: A comparative study of different texture patterns | Precision Engineering | 2017 | 126 |
| 34 | Quasi-three-dimensional numerical simulation of spouted beds in cylinder | Powder Technology | 2000 | 124 |
| 35 | Atomistic simulation of shear localization in Cu–Zr bulk metallic glass | Intermetallics | 2006 | 124 |
| 36 | Highly wear-resistant cutting tools with textured surfaces in steel cutting | CIRP Annals - Manufacturing Technology | 2012 | 120 |
| 37 | Influence of Cumulenic Chains on the Vibrational and Electronic Properties ofsp−sp2Amorphous Carbon | Physical Review Letters | 2007 | 117 |
| 38 | An adaptive trajectory control of manipulators | International Journal of Control | 1981 | 115 |
| 39 | Computer simulation of bubbles in large-particle fluidized beds | Powder Technology | 1998 | 115 |
| 40 | Production of secondary drops during the single water drop impact onto a plane water surface | Experiments in Fluids | 2006 | 114 |
| 41 | Icosahedral clustering with medium-range order and local elastic properties of amorphous metals | Acta Materialia | 2010 | 114 |
| 42 | Experimental Measurement of the Magnus Force on a Rotating Sphere at Low Reynolds Numbers | Journal of Fluids Engineering, Transactions of the ASME | 1985 | 111 |
| 43 | Combustion mechanism of liquid fuel spray in a gaseous flame | Physics of Fluids | 2005 | 109 |
| 44 | Finite element analysis of melting and solidifying processes in laser rapid prototyping of metallic powders | International Journal of Machine Tools and Manufacture | 1999 | 105 |
| 45 | Advanced low NOx combustion using highly preheated air | Energy Conversion and Management | 2001 | 105 |
| 46 | Anisotropic effects in elastic and incipient plastic deformation under (001), (110), and (111) nanoindentation of Al and Cu | Physical Review B | 2007 | 105 |
| 47 | Mechanical Properties of Collagen Fascicles From the Rabbit Patellar Tendon | Journal of Biomechanical Engineering | 1999 | 103 |
| 48 | Strict LMI conditions for stability, robust stabilization, and H/sub ∞/ control of descriptor systems | | 0 | 102 |
| 49 | Age-related changes in biomechanical properties of the Achilles tendon in rabbits | European Journal of Applied Physiology and Occupational Physiology | 1996 | 101 |
| 50 | DEM–CFD analysis of fluidization behavior of Geldart Group A particles using a dynamic adhesion force model | Powder Technology | 2013 | 101 |
