# | Title | Journal | Year | Citations |
---|
1 | Direct Growth of Freestanding ZnO Tetrapod Networks for Multifunctional Applications in Photocatalysis, UV Photodetection, and Gas Sensing | ACS Applied Materials & Interfaces | 2015 | 433 |
2 | Alloying behavior in multi-component AlCoCrCuFe and NiCoCrCuFe high entropy alloys | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2012 | 326 |
3 | Influence of martensite content and morphology on tensile and impact properties of high-martensite dual-phase steels | Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science | 1999 | 323 |
4 | Bulk tracer diffusion in CoCrFeNi and CoCrFeMnNi high entropy alloys | Acta Materialia | 2018 | 295 |
5 | Tensile and wear behaviour of in situ Al–7Si/TiB2 particulate composites | Wear | 2008 | 286 |
6 | Effect of laser surface melting on corrosion and wear resistance of a commercial magnesium alloy | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2003 | 265 |
7 | Ni tracer diffusion in CoCrFeNi and CoCrFeMnNi high entropy alloys | Journal of Alloys and Compounds | 2016 | 222 |
8 | Alloying, thermal stability and strengthening in spark plasma sintered AlxCoCrCuFeNi high entropy alloys | Journal of Alloys and Compounds | 2014 | 220 |
9 | Processing and properties of nanocrystalline CuNiCoZnAlTi high entropy alloys by mechanical alloying | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2010 | 219 |
10 | A Review on the various synthesis routes of TiC reinforced ferrous based composites | Journal of Materials Science | 2002 | 202 |
11 | Synthesis and characterization of nanofluid for advanced heat transfer applications | Scripta Materialia | 2006 | 202 |
12 | Sub-zero treatments of AISI D2 steel: Part I. Microstructure and hardness | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2010 | 200 |
13 | Multicomponent equiatomic rare earth oxides with a narrow band gap and associated praseodymium multivalency | Dalton Transactions | 2017 | 195 |
14 | Development of an efficient grain refiner for Al–7Si alloy and its modification with strontium | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2000 | 194 |
15 | Mineralization of osteoblasts with electrospun collagen/hydroxyapatite nanofibers | Journal of Materials Science: Materials in Medicine | 2008 | 166 |
16 | Aluminum-Based Cast In Situ Composites: A Review | Journal of Materials Engineering and Performance | 2015 | 162 |
17 | Development of hard/soft ferrite nanocomposite for enhanced microwave absorption | Ceramics International | 2011 | 157 |
18 | On the parameters to assess the glass forming ability of liquids | Journal of Non-Crystalline Solids | 2005 | 155 |
19 | The influence of interfacial characteristics between SiCp and Mg/Al metal matrix on wear, coefficient of friction and microhardness | Wear | 2001 | 151 |
20 | Effect of Deep Cryogenic Treatment on the Carbide Precipitation and Tribological Behavior of D2 Steel | Materials and Manufacturing Processes | 2007 | 145 |
21 | Wear and corrosion behavior of laser surface engineered AISI H13 hot working tool steel | Surface and Coatings Technology | 2015 | 140 |
22 | Effect of laser parameters on microstructure and hardness of laser clad and tempered AISI H13 tool steel | Surface and Coatings Technology | 2014 | 136 |
23 | Development of Al–Ti–C grain refiners and study of their grain refining efficiency on Al and Al–7Si alloy | Journal of Alloys and Compounds | 2005 | 134 |
24 | Elastic modulus of biomedical titanium alloys by nano-indentation and ultrasonic techniques—A comparative study | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2008 | 133 |
25 | Development and characterization of Al2Cu and Ag2Al nanoparticle dispersed water and ethylene glycol based nanofluid | Materials Science and Engineering B: Solid-State Materials for Advanced Technology | 2007 | 132 |
26 | Hot corrosion behavior of detonation gun sprayed Cr3C2–NiCr coatings on Ni and Fe-based superalloys in Na2SO4–60% V2O5 environment at 900°C | Journal of Alloys and Compounds | 2008 | 132 |
27 | Tensile properties of carbon nanotubes reinforced aluminum matrix composites: A review | Carbon | 2020 | 130 |
28 | A review on the synthesis of in situ aluminum based composites by thermal, mechanical and mechanical–thermal activation of chemical reactions | Journal of Materials Science | 2007 | 129 |
29 | Improved plasticity of bulk metallic glasses upon cold rolling | Scripta Materialia | 2010 | 128 |
30 | Effect of beam oscillation on electron beam welding of copper with AISI-304 stainless steel | Journal of Materials Processing Technology | 2016 | 126 |
31 | Pool boiling heat transfer characteristics of ZrO2–water nanofluids from a flat surface in a pool | Heat and Mass Transfer | 2008 | 120 |
32 | A critical evaluation on efficacy of recrystallization vs. strain induced boundary migration in achieving grain boundary engineered microstructure in a Ni-base superalloy | Acta Materialia | 2018 | 120 |
33 | Effect of different carbon nano-fillers on rheological properties and lap shear strength of epoxy adhesive joints | Composites Part A: Applied Science and Manufacturing | 2016 | 119 |
34 | Simulation of thermal and electric field evolution during spark plasma sintering | Ceramics International | 2009 | 118 |
35 | Structure–property correlation in laser surface treated AISI H13 tool steel for improved mechanical properties | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2014 | 114 |
36 | Effect of TiB2 particles on aging response of Al–4Cu alloy | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2004 | 112 |
37 | Friction stir processing of magnesium–nanohydroxyapatite composites with controlled in vitro degradation behavior | Materials Science and Engineering C | 2014 | 109 |
38 | High-strength Zr-Nb-(Cu,Ni,Al) composites with enhanced plasticity | Applied Physics Letters | 2003 | 108 |
39 | Correlation of microstructure with wear behaviour of deep cryogenically treated AISI D2 steel | Wear | 2009 | 108 |
40 | Influence of temperature of sub-zero treatments on the wear behaviour of die steel | Wear | 2009 | 107 |
41 | Effect of intermediate heat treatment on mechanical properties of SiCf/SiC composites with BN interphase prepared by ICVI | Journal of the European Ceramic Society | 2011 | 107 |
42 | Tungsten particle reinforced Al 5083 composite with high strength and ductility | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2015 | 105 |
43 | Phase formation and thermal stability of CoCrFeNi and CoCrFeMnNi equiatomic high entropy alloys | Journal of Alloys and Compounds | 2019 | 105 |
44 | Thermo-physical property measurement of nano-gold dispersed water based nanofluids prepared by chemical precipitation technique | Journal of Colloid and Interface Science | 2010 | 103 |
45 | Influence of processing parameters on dynamic recrystallization and the associated annealing twin boundary evolution in a nickel base superalloy | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2017 | 103 |
46 | Development of carbon nanotubes reinforced hydroxyapatite composite coatings on titanium by electrodeposition method | Corrosion Science | 2013 | 102 |
47 | Formation and Stability of Equiatomic and Nonequiatomic Nanocrystalline CuNiCoZnAlTi High-Entropy Alloys by Mechanical Alloying | Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science | 2010 | 100 |
48 | A study on the variation of forces and temperature in a friction stir welding process: A finite element approach | Journal of Manufacturing Processes | 2016 | 100 |
49 | Cold roll bonding of multi-layered bi-metal laminate composites | Composites Science and Technology | 2009 | 99 |
50 | Study of channel angle influence on material flow and strain inhomogeneity in equal channel angular pressing using 3D finite element simulation | Journal of Materials Processing Technology | 2009 | 99 |