Guided Lamb waves for identification of damage in composite structures: A review | Journal of Sound and Vibration | 2006 | 947 |
Photonic signal processing of microwave signals | IEEE Transactions on Microwave Theory and Techniques | 2006 | 422 |
Simultaneously Increasing the Ductility and Strength of Ultra-Fine-Grained Pure Copper | Advanced Materials | 2006 | 301 |
Synthesis of anisotropic nanoparticles by seeded emulsion polymerization | Langmuir | 2006 | 243 |
The effect of surface composition on the functional properties of milk powders | Journal of Food Engineering | 2006 | 237 |
Preparation and characterization of transparent ZnO/epoxy nanocomposites with high-UV shielding efficiency | Polymer | 2006 | 231 |
Investigation of the mechanical properties of DGEBA-based epoxy resin with nanoclay additives | Composite Structures | 2006 | 213 |
A toughened epoxy resin by silica nanoparticle reinforcement | Journal of Applied Polymer Science | 2006 | 188 |
Wear and tool life of tungsten carbide, PCBN and PCD cutting tools | International Journal of Machine Tools and Manufacture | 2006 | 169 |
Elastic modulus and stress-strain response of human enamel by nano-indentation | Biomaterials | 2006 | 166 |
Prediction of cutting forces in machining of metal matrix composites | International Journal of Machine Tools and Manufacture | 2006 | 160 |
Water-based extraction of pectin from flavedo and albedo of orange peels | Chemical Engineering Journal | 2006 | 124 |
Novel behaviour of friction and wear of epoxy composites reinforced by carbon nanotubes | Wear | 2006 | 120 |
Bending and local buckling of a nanocomposite beam reinforced by a single-walled carbon nanotube | International Journal of Solids and Structures | 2006 | 117 |
Distributed Turbo Coding With Soft Information Relaying in Multihop Relay Networks | IEEE Journal on Selected Areas in Communications | 2006 | 113 |
Tidal influence on behaviour of a coastal aquifer adjacent to a low-relief estuary | Journal of Hydrology | 2006 | 110 |
On machining of hardened AISI D2 steel with PCBN tools | Journal of Materials Processing Technology | 2006 | 94 |
Effect of design on the performance of a dry powder inhaler using computational fluid dynamics. Part 2: Air inlet size | Journal of Pharmaceutical Sciences | 2006 | 93 |
Micro- and nano-scale deformation behavior of nylon 66-based binary and ternary nanocomposites | Composites Science and Technology | 2006 | 91 |
What is important in the simulation of spray dryer performance and how do current CFD models perform? | Applied Mathematical Modelling | 2006 | 89 |
Morphology, tensile properties, and fracture toughness of epoxy/Al2O3 nanocomposites | Journal of Polymer Science, Part B: Polymer Physics | 2006 | 87 |
Stress integration and mesh refinement for large deformation in geomechanics | International Journal for Numerical Methods in Engineering | 2006 | 86 |
Roles of the textural and surface chemical properties of activated carbon in the adsorption of acid blue dye | Langmuir | 2006 | 84 |
Crack identification in aluminium plates using Lamb wave signals of a PZT sensor network | Smart Materials and Structures | 2006 | 84 |
Multiwalled Carbon Nanotubes Functionalized by Hyperbranched Poly(urea-urethane)s by a One-Pot Polycondensation | Macromolecular Rapid Communications | 2006 | 83 |