| # | Title | Journal | Year | Citations |
|---|
| 1 | A Fatigue Failure Criterion for Fiber Reinforced Materials | Journal of Composite Materials | 1973 | 1,301 |
| 2 | On the validity of the hall-petch relationship in nanocrystalline materials | Scripta Metallurgica | 1989 | 1,054 |
| 3 | Constitutive Equations for Elastic-Viscoplastic Strain-Hardening Materials | Journal of Applied Mechanics, Transactions ASME | 1975 | 855 |
| 4 | Higher, Stronger, Better…︁ A Review of 5 Volt Cathode Materials for Advanced Lithium‐Ion Batteries | Advanced Energy Materials | 2012 | 612 |
| 5 | Review on Li–air batteries—Opportunities, limitations and perspective | Journal of Power Sources | 2011 | 535 |
| 6 | Indexing of icosahedral quasiperiodic crystals | Journal of Materials Research | 1986 | 527 |
| 7 | Ordered Liquid Aluminum at the Interface with Sapphire | Science | 2005 | 307 |
| 8 | Polyblends containing a liquid crystalline polymer | Polymer | 1985 | 284 |
| 9 | Densification mechanisms in spark plasma sintering of nanocrystalline ceramics | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2007 | 283 |
| 10 | Sintering and densification of nanocrystalline ceramic oxide powders: a review | Advances in Applied Ceramics | 2008 | 259 |
| 11 | Single Nanocrystals of Platinum Prepared by Partial Dissolution of Au-Pt Nanoalloys | Science | 2009 | 255 |
| 12 | Conductive polymer blends with low carbon black loading: Polypropylene/polyamide | Polymer Engineering and Science | 1996 | 216 |
| 13 | Low-speed fracture instabilities in a brittle crystal | Nature | 2008 | 191 |
| 14 | Structure and composition of anodic films formed on binary Mg–Al alloys in KOH–aluminate solutions under continuous sparking | Corrosion Science | 2001 | 189 |
| 15 | Review of the phase transformation and synthesis of inorganic solids obtained by mechanical treatment (mechanochemical reactions) | Materials Science and Engineering | 1979 | 176 |
| 16 | Anisotropic lattice distortions in biogenic aragonite | Nature Materials | 2004 | 175 |
| 17 | The effect of ball milling and equal channel angular pressing on the hydrogen absorption/desorption properties of Mg–4.95 wt% Zn–0.71 wt% Zr (ZK60) alloy | Acta Materialia | 2004 | 171 |
| 18 | Transparent nanocrystalline MgO by rapid and low-temperature spark plasma sintering | Journal of Materials Research | 2004 | 171 |
| 19 | Anisotropic lattice distortions in biogenic calcite induced by intra-crystalline organic molecules | Journal of Structural Biology | 2006 | 171 |
| 20 | Electrolytic ZrO2 Coatings: I. Electrochemical Aspects | Journal of the Electrochemical Society | 1991 | 168 |
| 21 | Oscillatory Mass Transport in Vapor-Liquid-Solid Growth of Sapphire Nanowires | Science | 2010 | 166 |
| 22 | Review on copper chemical–mechanical polishing (CMP) and post-CMP cleaning in ultra large system integrated (ULSI)—An electrochemical perspective | Electrochimica Acta | 2007 | 163 |
| 23 | Polyaniline–DBSA/organophilic clay nanocomposites: synthesis and characterization | Synthetic Metals | 2002 | 162 |
| 24 | Thermal degradation of poly(acrylic acid) containing copper nitrate | Polymer Degradation and Stability | 2004 | 161 |
| 25 | Anodizing of Pure Magnesium in KOH‐Aluminate Solutions under Sparking | Journal of the Electrochemical Society | 1999 | 157 |
| 26 | Conductive blends of thermally dodecylbenzene sulfonic acid-doped polyaniline with thermoplastic polymers | Journal of Applied Polymer Science | 1997 | 152 |
| 27 | PolyHIPE: IPNs, hybrids, nanoscale porosity, silica monoliths and ICP-based sensors | Polymer | 2005 | 147 |
| 28 | STRUCTURAL ORDER IN LIQUIDS INDUCED BY INTERFACES WITH CRYSTALS | Annual Review of Materials Research | 2006 | 146 |
| 29 | Solidification, solution treatment and age hardening of a Mg–1.6wt.% Ca–3.2wt.% Zn alloy | Acta Materialia | 2006 | 141 |
| 30 | Measured and calculated radiative lifetime and optical absorption ofInxGa1−xN/GaNquantum structures | Physical Review B | 2000 | 137 |
| 31 | Determination of the degree of preferred orientation within the March–Dollase approach | Journal of Applied Crystallography | 2009 | 136 |
| 32 | Densification of nanocrystalline Y2O3 ceramic powder by spark plasma sintering | Journal of the European Ceramic Society | 2009 | 132 |
| 33 | Anisotropic lattice distortions in the mollusk-made aragonite: A widespread phenomenon | Journal of Structural Biology | 2006 | 126 |
| 34 | Short-circuit diffusion in an ultrafine-grained copper–zirconium alloy produced by equal channel angular pressing | Acta Materialia | 2007 | 126 |
| 35 | Nanometer-Thick Equilibrium Films: The Interface Between Thermodynamics and Atomistics | Science | 2011 | 126 |
| 36 | Nanocrystalline materials: A study of WC-based hard metals | Progress in Materials Science | 1997 | 125 |
| 37 | Porous poly(2-hydroxyethyl methacrylate) hydrogels synthesized within high internal phase emulsions | Soft Matter | 2007 | 124 |
| 38 | Screening the Incorporation of Amino Acids into an Inorganic Crystalline Host: the Case of Calcite | Advanced Functional Materials | 2012 | 124 |
| 39 | Annealing-induced interfacial toughening using a molecular nanolayer | Nature | 2007 | 118 |
| 40 | The Microstructure of Biogenic Calcite: A View by High-Resolution Synchrotron Powder Diffraction | Advanced Materials | 2006 | 117 |
| 41 | Accelerated Diffusion and Phase Transformations in Co–Cu Alloys Driven by the Severe Plastic Deformation | Materials Transactions | 2012 | 117 |
| 42 | Polymerized pickering HIPEs: Effects of synthesis parameters on porous structure | Journal of Polymer Science Part A | 2010 | 116 |
| 43 | Organic–inorganic networks in foams from high internal phase emulsion polymerizations | Polymer | 2001 | 114 |
| 44 | Au–Sapphire (0001) solid–solid interfacial energy | Journal of Materials Science | 2006 | 111 |
| 45 | Electrochemical Impedance Spectroscopy of Porous TiO2 for Photocatalytic Applications | Journal of Physical Chemistry C | 2010 | 111 |
| 46 | Reduced contact resistance of PEM fuel cell's bipolar plates via surface texturing | Journal of Power Sources | 2007 | 110 |
| 47 | Transparent yttrium aluminum garnet (YAG) ceramics by spark plasma sintering | Journal of the European Ceramic Society | 2007 | 109 |
| 48 | Reactive isothermal solidification in the Ni–Sn system | Acta Materialia | 1998 | 108 |
| 49 | Characterization of electroless deposited Co(W,P) thin films for encapsulation of copper metallization | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2001 | 106 |
| 50 | Structure refinement of titanium carbonitride (TiCN) | Materials Letters | 1998 | 105 |
