| # | Title | Journal | Year | Citations |
|---|
| 1 | Silk‐Molded Flexible, Ultrasensitive, and Highly Stable Electronic Skin for Monitoring Human Physiological Signals | Advanced Materials | 2014 | 1,225 |
| 2 | Consensus statement for stability assessment and reporting for perovskite photovoltaics based on ISOS procedures | Nature Energy | 2020 | 797 |
| 3 | A Universal Ternary‐Solvent‐Ink Strategy toward Efficient Inkjet‐Printed Perovskite Quantum Dot Light‐Emitting Diodes | Advanced Materials | 2022 | 109 |
| 4 | Synthesis of N,S-Doped Carbon Quantum Dots for Use in Organic Solar Cells as the ZnO Modifier To Eliminate the Light-Soaking Effect | ACS Applied Materials & Interfaces | 2019 | 94 |
| 5 | Photoresponsive Transistors Based on Lead‐Free Perovskite and Carbon Nanotubes | Advanced Functional Materials | 2020 | 84 |
| 6 | Controllable Synthesis of 3D Ni(OH)2and NiO Nanowalls on Various Substrates for High-Performance Nanosensors | Small | 2015 | 81 |
| 7 | An Efficiency of 16.46% and a T80 Lifetime of Over 4000 h for the PM6:Y6 Inverted Organic Solar Cells Enabled by Surface Acid Treatment of the Zinc Oxide Electron Transporting Layer | ACS Applied Materials & Interfaces | 2021 | 80 |
| 8 | Printable High‐Aspect Ratio and High‐Resolution Cu Grid Flexible Transparent Conductive Film with Figure of Merit over 80 000 | Advanced Electronic Materials | 2019 | 76 |
| 9 | Efficient multi-barrier thin film encapsulation of OLED using alternating Al2O3 and polymer layers | RSC Advances | 2018 | 70 |
| 10 | Fully Solution‐Processed Semi‐Transparent Perovskite Solar Cells With Ink‐Jet Printed Silver Nanowires Top Electrode | Solar Rrl | 2018 | 66 |
| 11 | Realizing 22.3% EQE and 7-Fold Lifetime Enhancement in QLEDs via Blending Polymer TFB and Cross-Linkable Small Molecules for a Solvent-Resistant Hole Transport Layer | ACS Applied Materials & Interfaces | 2020 | 62 |
| 12 | Modification of the Highly Conductive PEDOT:PSS Layer for Use in Silver Nanogrid Electrodes for Flexible Inverted Polymer Solar Cells | ACS Applied Materials & Interfaces | 2017 | 55 |
| 13 | Power Conversion Efficiency and Device Stability Improvement of Inverted Perovskite Solar Cells by Using a ZnO:PFN Composite Cathode Buffer Layer | ACS Applied Materials & Interfaces | 2016 | 50 |
| 14 | Inkjet‐Printed High‐Efficiency Multilayer QLEDs Based on a Novel Crosslinkable Small‐Molecule Hole Transport Material | Small | 2019 | 50 |
| 15 | Roll-to-roll printed stable and thickness-independent ZnO:PEI composite electron transport layer for inverted organic solar cells | Solar Energy | 2019 | 49 |
| 16 | A low-cost and low-temperature processable zinc oxide-polyethylenimine (ZnO:PEI) nano-composite as cathode buffer layer for organic and perovskite solar cells | Organic Electronics | 2016 | 45 |
| 17 | Pyridine-Based Electron-Transport Materials with High Solubility, Excellent Film-Forming Ability, and Wettability for Inkjet-Printed OLEDs | ACS Applied Materials & Interfaces | 2017 | 43 |
| 18 | High performance inkjet-printed QLEDs with 18.3% EQE: improving interfacial contact by novel halogen-free binary solvent system | Nano Research | 2021 | 42 |
| 19 | Inkjet-Printed Quantum Dot Light-Emitting Diodes with an Air-Stable Hole Transport Material | ACS Applied Materials & Interfaces | 2017 | 40 |
| 20 | Realizing 17.0% external quantum efficiency in red quantum dot light-emitting diodes by pursuing the ideal inkjet-printed film and interface | Organic Electronics | 2019 | 40 |
| 21 | Electrochemical Corrosion of Ag Electrode in the Silver Grid Electrode‐Based Flexible Perovskite Solar Cells and the Suppression Method | Solar Rrl | 2018 | 37 |
| 22 | Inkjet printing of oxide thin film transistor arrays with small spacing with polymer-doped metal nitrate aqueous ink | Journal of Materials Chemistry C | 2017 | 36 |
| 23 | All-carbon-based field effect transistors fabricated by aerosol jet printing on flexible substrates | Journal of Micromechanics and Microengineering | 2013 | 32 |
| 24 | Highly Air‐Stable Electron‐Transport Material for Ink‐Jet‐Printed OLEDs | Chemistry - A European Journal | 2016 | 31 |
| 25 | 0.7% Roll-off for Solution-Processed Blue Phosphorescent OLEDs with a Novel Electron Transport Material | ACS Photonics | 2017 | 30 |
| 26 | Layer-by-layer slot-die coated high-efficiency organic solar cells processed using twin boiling point solvents under ambient condition | Nano Research | 2021 | 28 |
| 27 | An efficiency of 14.29% and 13.08% for 1 cm2 and 4 cm2 flexible organic solar cells enabled by sol–gel ZnO and ZnO nanoparticle bilayer electron transporting layers | Journal of Materials Chemistry A | 2021 | 26 |
| 28 | Suppression of Ag migration by low-temperature sol-gel zinc oxide in the Ag nanowires transparent electrode-based flexible perovskite solar cells | Organic Electronics | 2020 | 22 |
| 29 | Photocross-Linkable Hole Transport Materials for Inkjet-Printed High-Efficient Quantum Dot Light-Emitting Diodes | ACS Applied Materials & Interfaces | 2020 | 21 |
| 30 | Four new bipolar Indolo[3,2-b]carbazole derivatives for blue OLEDs | Dyes and Pigments | 2021 | 19 |
| 31 | Benzo[d]imidazole-functionalized triazatruxenes as the emitting materials for solution-processed non-doped OLEDs | Dyes and Pigments | 2021 | 19 |
| 32 | Synthesis and characterization of green-emitting Ir(iii) complexes based on a functionalized benzimidazole ligand | New Journal of Chemistry | 2017 | 18 |
| 33 | Water-assisted formation of highly conductive silver nanowire electrode for all solution-processed semi-transparent perovskite and organic solar cells | Journal of Materials Science | 2020 | 18 |
| 34 | Optimizing the central steric hindrance of cross-linkable hole transport materials for achieving highly efficient RGB QLEDs | Materials Chemistry Frontiers | 2020 | 18 |
| 35 | Enhancing the Capillary Force of Binder-Jetting Printing Ti6Al4V and Mechanical Properties under High Temperature Sintering by Mixing Fine Powder | Metals | 2020 | 18 |
| 36 | Controllable synthesis and n-doping of HMoOx nanoparticle inks through simple photoreduction for solution-processed organic photovoltaics | Chemical Engineering Journal | 2021 | 17 |
| 37 | Two N,N-chelated difluoroboron complexes containing phenanthroimidazole moiety: Synthesis and luminescence properties | Dyes and Pigments | 2019 | 14 |
| 38 | Enhanced performance for organic light-emitting diodes by embedding an aerosol jet printed conductive grid | Journal Physics D: Applied Physics | 2014 | 13 |
| 39 | Synthesis and photo- and electro-luminescent properties of Ir(iii) complexes attached to polyhedral oligomeric silsesquioxane materials | RSC Advances | 2015 | 13 |
| 40 | Non‐Uniform Chemical Corrosion of Metal Electrode of p–i–n Type of Perovskite Solar Cells Caused by the Diffusion of CH3NH3I | Energy Technology | 2020 | 13 |
| 41 | Large-area (64 × 64 array) inkjet-printed high-performance metal oxide bilayer heterojunction thin film transistors and n-metal-oxide-semiconductor (NMOS) inverters | Journal of Materials Science and Technology | 2021 | 13 |
| 42 | Molecular Design of Diazo Compound for Carbene-Mediated Cross-Linking of Hole-Transport Polymer in QLED with Reduced Energy Barrier and Improved Charge Balance | ACS Applied Materials & Interfaces | 2022 | 13 |
| 43 | Photo- and electro-luminescence properties of the organic bipolar molecules containing phenothiazine and phenanthoimidazole moieties | Synthetic Metals | 2020 | 12 |
| 44 | Efficient organic solar cells with the active layer fabricated from glovebox to ambient condition | Applied Physics Letters | 2020 | 11 |
| 45 | Suppression of ion migration through cross-linked PDMS doping to enhance the operational stability of perovskite solar cells | Solar Energy | 2021 | 10 |
| 46 | Peripherally diketopyrrolopyrrole-functionalized dendritic oligothiophenes – synthesis, molecular structure, properties and applications | Polymer Chemistry | 2017 | 9 |
| 47 | Roll-to-roll micro-gravure printed P3HT:PCBM organic solar cells | Flexible and Printed Electronics | 2019 | 9 |
| 48 | Finely Controlled Synthesis of Zn1–xMgxO Nanoparticles with Uniform Size Distribution Used as Electron Transport Materials for Red QLEDs | ACS Applied Electronic Materials | 2022 | 8 |
| 49 | Breakdown point of quantum confinement photoluminescence and space-separation dependent energy transfer from silicon nanocrystals | Applied Physics Letters | 2013 | 7 |
| 50 | Double layer printed high performance OLED based on PEDOT:PSS/Ir(bt)2acac:CDBP | AIP Advances | 2018 | 7 |
