# | Title | Journal | Year | Citations |
---|
1 | Cold spray additive manufacturing and repair: Fundamentals and applications | Additive Manufacturing | 2018 | 269 |
2 | Solid-state additive manufacturing and repairing by cold spraying: A review | Journal of Materials Science and Technology | 2018 | 238 |
3 | Reinforcement and interphase of polymer/graphene oxide nanocomposites | Journal of Materials Chemistry | 2012 | 225 |
4 | Effect of heat treatment on the phase transformation and mechanical properties of Ti6Al4V fabricated by selective laser melting | Journal of Alloys and Compounds | 2018 | 219 |
5 | Jet impingement heat transfer – Part I: Mean and root-mean-square heat transfer and velocity distributions | International Journal of Heat and Mass Transfer | 2007 | 193 |
6 | Mechanical regulation of mesenchymal stem cell differentiation | Journal of Anatomy | 2015 | 179 |
7 | Experimental investigation of small diameter two-phase closed thermosyphons charged with water, FC-84, FC-77 and FC-3283 | Applied Thermal Engineering | 2010 | 174 |
8 | Reinforcement of hydrogenated carboxylated nitrile–butadiene rubber with exfoliated graphene oxide | Carbon | 2011 | 164 |
9 | Deposition of FeCoNiCrMn high entropy alloy (HEA) coating via cold spraying | Journal of Materials Science and Technology | 2019 | 158 |
10 | Influence of the pore size and porosity of selective laser melted Ti6Al4V ELI porous scaffold on cell proliferation, osteogenesis and bone ingrowth | Materials Science and Engineering C | 2020 | 158 |
11 | Alternative fuel options for low carbon maritime transportation: Pathways to 2050 | Journal of Cleaner Production | 2021 | 157 |
12 | Effects of Stride Length and Running Mileage on a Probabilistic Stress Fracture Model | Medicine and Science in Sports and Exercise | 2009 | 153 |
13 | Strong and bioactive gelatin–graphene oxide nanocomposites | Soft Matter | 2011 | 144 |
14 | Prediction of the Optimal Mechanical Properties for a Scaffold Used in Osteochondral Defect Repair | Tissue Engineering | 2006 | 139 |
15 | The impact of decellularization methods on extracellular matrix derived hydrogels | Scientific Reports | 2019 | 131 |
16 | 3D bioprinting spatiotemporally defined patterns of growth factors to tightly control tissue regeneration | Science Advances | 2020 | 130 |
17 | The effect of concentration, thermal history and cell seeding density on the initial mechanical properties of agarose hydrogels | Journal of the Mechanical Behavior of Biomedical Materials | 2009 | 127 |
18 | Visualisation of three-dimensional microcracks in compact bone | Journal of Anatomy | 2000 | 116 |
19 | Deep drawing process: analysis and experiment | Journal of Materials Processing Technology | 2003 | 116 |
20 | An experimental investigation of free and submerged miniature liquid jet array impingement heat transfer | Experimental Thermal and Fluid Science | 2007 | 116 |
21 | Mechanical and in vitro study of an isotropic Ti6Al4V lattice structure fabricated using selective laser melting | Journal of Alloys and Compounds | 2019 | 112 |
22 | Gas Flow, Particle Acceleration, and Heat Transfer in Cold Spray: A review | Journal of Thermal Spray Technology | 2016 | 111 |
23 | Poly(glycerol sebacate urethane)–Cellulose Nanocomposites with Water-Active Shape-Memory Effects | Biomacromolecules | 2014 | 110 |
24 | The Soft Robotics Toolkit: Shared Resources for Research and Design | Soft Robotics | 2014 | 109 |
25 | Advanced diamond-reinforced metal matrix composites via cold spray: Properties and deposition mechanism | Composites Part B: Engineering | 2017 | 109 |
26 | Engineering osteochondral constructs through spatial regulation of endochondral ossification | Acta Biomaterialia | 2013 | 106 |
27 | Technological drivers in data centers and telecom systems: Multiscale thermal, electrical, and energy management | Applied Energy | 2013 | 99 |
28 | The influence of aging temperature and aging time on the mechanical and tribological properties of selective laser melted maraging 18Ni-300 steel | Additive Manufacturing | 2018 | 98 |
29 | Modelling and identification of industrial pneumatic drive system | International Journal of Advanced Manufacturing Technology | 2012 | 97 |
30 | Tissue-specific extracellular matrix scaffolds for the regeneration of spatially complex musculoskeletal tissues | Biomaterials | 2019 | 91 |
31 | New insights into the coating/substrate interfacial bonding mechanism in cold spray | Scripta Materialia | 2016 | 90 |
32 | Natural convection heat transfer from two horizontal cylinders | Experimental Thermal and Fluid Science | 2008 | 87 |
33 | Nozzle geometry effects in liquid jet array impingement | Applied Thermal Engineering | 2009 | 87 |
34 | Mechanical behavior of transparent nanofibrillar cellulose–chitosan nanocomposite films in dry and wet conditions | Journal of the Mechanical Behavior of Biomedical Materials | 2014 | 86 |
35 | Impact strength of polymer-clay nanocomposites | Soft Matter | 2009 | 85 |
36 | A high-precision apparatus for the characterization of thermal interface materials | Review of Scientific Instruments | 2009 | 85 |
37 | Fuel Cell Power Systems for Maritime Applications: Progress and Perspectives | Sustainability | 2021 | 85 |
38 | Deformation simulation of cells seeded on a collagen-GAG scaffold in a flow perfusion bioreactor using a sequential 3D CFD-elastostatics model | Medical Engineering and Physics | 2009 | 84 |
39 | Estimating human exposure to transport noise in central Dublin, Ireland | Environment International | 2009 | 82 |
40 | Effect of hot isostatic pressing (HIP) on microstructure and mechanical properties of Ti6Al4V alloy fabricated by cold spray additive manufacturing | Additive Manufacturing | 2019 | 82 |
41 | The pericellular environment regulates cytoskeletal development and the differentiation of mesenchymal stem cells and determines their response to hydrostatic pressure | | 2013 | 79 |
42 | The influence of vehicle front-end design on pedestrian ground impact | Accident Analysis and Prevention | 2015 | 78 |
43 | Hybrid additive manufacturing of Al-Ti6Al4V functionally graded materials with selective laser melting and cold spraying | Journal of Materials Processing Technology | 2018 | 78 |
44 | A Comparative Study of Shear Stresses in Collagen-Glycosaminoglycan and Calcium Phosphate Scaffolds in Bone Tissue-Engineering Bioreactors | Tissue Engineering - Part A | 2009 | 77 |
45 | Viscoelastic properties of passive skeletal muscle in compression—Cyclic behaviour | Journal of Biomechanics | 2009 | 77 |
46 | Microstructure and mechanical properties of pure copper manufactured by selective laser melting | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2020 | 76 |
47 | Flow regime characterisation of an impinging axisymmetric synthetic jet | Experimental Thermal and Fluid Science | 2013 | 75 |
48 | Metal forming: an analysis of spinning processes | Journal of Materials Processing Technology | 2000 | 74 |
49 | The Role of Macrophages in the Infarcted Myocardium: Orchestrators of ECM Remodeling | Frontiers in Cardiovascular Medicine | 2019 | 70 |
50 | Microstructure and mechanical anisotropy of additively manufactured cold spray copper deposits | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2018 | 67 |