# | Title | Journal | Year | Citations |
---|
1 | Liquid–liquid transition in a strong bulk metallic glass-forming liquid | Nature Communications | 2013 | 169 |
2 | Review on manufacture by selective laser melting and properties of titanium based materials for biomedical applications | Materials Technology | 2016 | 97 |
3 | Local atomic arrangements and their topology in Ni–Zr and Cu–Zr glassy and crystalline alloys | Acta Materialia | 2013 | 83 |
4 | Elastic softening of β-type Ti–Nb alloys by indium (In) additions | Journal of the Mechanical Behavior of Biomedical Materials | 2014 | 73 |
5 | The impact of dislocations on coercivity in L10-MnAl | Journal of Alloys and Compounds | 2017 | 61 |
6 | Aqueous Solution Process for the Synthesis and Assembly of Nanostructured One-Dimensional α-MoO3 Electrode Materials | Chemistry of Materials | 2013 | 53 |
7 | Effect of sample size on ductility of metallic glass | Philosophical Magazine Letters | 2009 | 52 |
8 | Elastic constants of single crystalline β-Ti70Nb30 | Scripta Materialia | 2012 | 47 |
9 | High-temperature wetting and interfacial interaction between liquid Al and TiB2 ceramic | Journal of Materials Science | 2015 | 45 |
10 | Magnetocaloric (Fe–B)-based amorphous alloys | Journal of Magnetism and Magnetic Materials | 2013 | 41 |
11 | Local microstructure evolution at shear bands in metallic glasses with nanoscale phase separation | Scientific Reports | 2016 | 41 |
12 | Electrochemical deposition of hydroxyapatite on beta-Ti-40Nb | Surface and Coatings Technology | 2016 | 38 |
13 | The effect of the microstructure on the antiferromagnetic to ferromagnetic transition in FeRh alloys | Acta Materialia | 2017 | 33 |
14 | Oxidation treatments of beta-type Ti-40Nb for biomedical use | Surface and Coatings Technology | 2016 | 30 |
15 | Superior mechanical properties of FeCrMoVC | Applied Physics Letters | 2007 | 29 |
16 | Carbohydrate-Derived Nanoarchitectures: On a Synergistic Effect Toward an Improved Performance in Lithium–Sulfur Batteries | ACS Sustainable Chemistry and Engineering | 2014 | 29 |
17 | Medium range ordering and its effect on plasticity of Fe–Mn–B–Y–Nb bulk metallic glass | Philosophical Magazine | 2010 | 28 |
18 | Influence of Ag and Co additions on glass-forming ability, thermal and mechanical properties of Cu–Zr–Al bulk metallic glasses | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2016 | 28 |
19 | Deformation‐induced microstructural heterogeneity in monolithic Zr44Ti11Cu9.8Ni10.2Be25 bulk metallic glass | Physica Status Solidi - Rapid Research Letters | 2009 | 27 |
20 | Lithium Insertion into Li2MoO4: Reversible Formation of (Li3Mo)O4 with a Disordered Rock-Salt Structure | Chemistry of Materials | 2015 | 27 |
21 | Size Effect on Shear Fracture and Fragmentation of a Fe57.6Co14.4B19.2Si4.8Nb4 Bulk Metallic Glass | Advanced Engineering Materials | 2008 | 26 |
22 | Nanocrystalline body-centred cubic beta-titanium alloy processed by high-pressure torsion | International Journal of Materials Research | 2009 | 25 |
23 | Temperature dependence of the short-range order of Cu65Zr35 metallic glass | Intermetallics | 2013 | 25 |
24 | Possible Piezoelectric Materials CsMZr0.5(MoO4)3 (M = Al, Sc, V, Cr, Fe, Ga, In) and CsCrTi0.5(MoO4)3: Structure and Physical Properties | Journal of Physical Chemistry C | 2014 | 24 |
25 | Favorable microstructural modulation and enhancement of mechanical properties of Ti–Fe–Nb ultrafine composites | Philosophical Magazine Letters | 2009 | 23 |
26 | FeCo-based multiphase composites with high strength and large plastic deformation | Intermetallics | 2010 | 23 |
27 | Field-temperature phase diagrams of freestanding and substrate-constrained epitaxial Ni-Mn-Ga-Co films for magnetocaloric applications | Journal of Applied Physics | 2015 | 23 |
28 | Network Rearrangement in AgI‐Doped GeTe4 Glasses | Journal of the American Ceramic Society | 2015 | 23 |
29 | Sputter crater formation in the case of microsecond pulsed glow discharge in a Grimm-type source. Comparison of direct current and radio frequency modes | Spectrochimica Acta, Part B: Atomic Spectroscopy | 2012 | 19 |
30 | Short‐Range Order in Ge–As–Te Glasses | Journal of the American Ceramic Society | 2014 | 19 |
31 | Thermal stability of amorphous oxide in Al87Ni3Y10 metallic glass | Corrosion Science | 2013 | 18 |
32 | Short range order in Ge–As–Se glasses | Journal of Alloys and Compounds | 2015 | 18 |
33 | Microstructure and mechanical properties of partially amorphous Al85Y8Ni5Co2 plate produced by spray forming | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2010 | 16 |
34 | Wetting, reactivity, and phase formation at interfaces between Ni–Al melts and TiB2 ultrahigh‐temperature ceramic | Journal of the American Ceramic Society | 2018 | 15 |
35 | On the structural relaxation of bulk metallic glass under warm deformation | Intermetallics | 2009 | 14 |
36 | Structural behaviour of Pd40Cu30Ni10P20 metallic glass under high pressure | Intermetallics | 2013 | 14 |
37 | Investigation of Copper-Cobalt-Oxides as Model Systems for Composite Interactions in Conversion-Type Electrodes for Lithium-Ion Batteries | Journal of the Electrochemical Society | 2013 | 13 |
38 | Inhomogeneous thermal expansion of metallic glasses in atomic-scale studied by in-situ synchrotron X-ray diffraction | Journal of Applied Physics | 2015 | 10 |
39 | Wettability and Reactivity of ZrB2 Substrates with Liquid Al | Journal of Materials Engineering and Performance | 2016 | 10 |
40 | Analysis of surface pre‐treatment for SAW‐substrate material (LiNbO3) and deposited thin films of Ta/Ti using ARXPS | Surface and Interface Analysis | 2014 | 9 |
41 | Nanostructured Ti‐Zr‐Pd‐Si‐(Nb) bulk metallic composites: Novel biocompatible materials with superior mechanical strength and elastic recovery | Journal of Biomedical Materials Research - Part B Applied Biomaterials | 2015 | 8 |
42 | AlNiYCo Amorphous Matrix Composites Induced by Bismuth and Lead Additions | Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science | 2011 | 7 |
43 | Effect of crystallization on the surface area of porous Ni-based metallic glass foams | Philosophical Magazine Letters | 2011 | 7 |
44 | Tensile fracture dynamics and intrinsic plasticity of metallic glasses | Applied Physics Letters | 2013 | 7 |
45 | Electronic entropy change in Ni-doped FeRh | Materials Today Physics | 2019 | 7 |
46 | Experimental and thermodynamic assessment of the Nd–Ti system | Calphad: Computer Coupling of Phase Diagrams and Thermochemistry | 2014 | 6 |
47 | Effect of Carbon Addition on the Microstructural Evolution and Mechanical Properties in Hypo-Eutectic Fe-Zr(-Nb) Alloys | Materials Transactions | 2010 | 5 |
48 | Microstructure and mechanical properties of Fe–Si–Ti–(Cu, Al) heterostructured ultrafine composites | Journal of Alloys and Compounds | 2011 | 5 |
49 | Initial preorder as condition for L1 ordering in ultrathin CoPt films | Journal of Applied Physics | 2013 | 5 |
50 | Fabrication and characterization of Co40Fe22Ta8-xYxB30 (x = 0, 2.5, 4, 6, and 8) metallic glasses with high thermal stability and good soft magnetic properties | Journal of Applied Physics | 2014 | 4 |