# | Title | Journal | Year | Citations |
---|
1 | A review of solar photovoltaic technologies | Renewable and Sustainable Energy Reviews | 2011 | 1,428 |
2 | Review of high efficiency and clean reactivity controlled compression ignition (RCCI) combustion in internal combustion engines | Progress in Energy and Combustion Science | 2015 | 950 |
3 | A review of solar thermal technologies☆ | Renewable and Sustainable Energy Reviews | 2010 | 589 |
4 | A review of energy models | Renewable and Sustainable Energy Reviews | 2006 | 547 |
5 | Study on mechanical and wear properties of Al 7075/Al2O3/graphite hybrid composites | Composites Part B: Engineering | 2014 | 483 |
6 | Influence of stirring speed and stirring time on distribution of particles in cast metal matrix composite | Journal of Materials Processing Technology | 2006 | 457 |
7 | Influence of B4C on the tribological and mechanical properties of Al 7075–B4C composites | Composites Part B: Engineering | 2013 | 424 |
8 | Phase change material-based building architecture for thermal management in residential and commercial establishments | Renewable and Sustainable Energy Reviews | 2008 | 412 |
9 | HEAT TRANSFER ENHANCEMENT IN A LATENT HEAT STORAGE SYSTEM1Paper presented at the ISES Solar World Congress, Taejon, South Korea, 24–29 August 1997.1 | Solar Energy | 1999 | 406 |
10 | Mechanical and water absorption behaviour of banana/sisal reinforced hybrid composites | Materials & Design | 2011 | 395 |
11 | Applications of fuzzy logic in renewable energy systems – A review | Renewable and Sustainable Energy Reviews | 2015 | 393 |
12 | Mahua oil (Madhuca Indica seed oil) methyl ester as biodiesel-preparation and emission characterstics | Biomass and Bioenergy | 2005 | 337 |
13 | Experimental investigation on convective heat transfer and rheological characteristics of Cu–TiO2 hybrid nanofluids | Experimental Thermal and Fluid Science | 2014 | 313 |
14 | Cryogenic treatment to augment wear resistance of tool and die steels | Cryogenics | 2001 | 310 |
15 | Experimental Investigations on Mechanical Properties Of Jute Fiber Reinforced Composites with Polyester and Epoxy Resin Matrices | Procedia Engineering | 2014 | 283 |
16 | Prediction of tensile properties of hybrid-natural fiber composites | Composites Part B: Engineering | 2012 | 280 |
17 | A review of climate change, mitigation and adaptation | Renewable and Sustainable Energy Reviews | 2012 | 264 |
18 | Experimental investigation on mechanical behaviour, modelling and optimization of wear parameters of B4C and graphite reinforced aluminium hybrid composites | Materials & Design | 2014 | 261 |
19 | Effect of double layer phase change material in building roof for year round thermal management | Energy and Buildings | 2008 | 258 |
20 | Sustainable thermal energy storage technologies for buildings: A review | Renewable and Sustainable Energy Reviews | 2012 | 254 |
21 | An experimental investigation of hydrogen-enriched air induction in a diesel engine system | International Journal of Hydrogen Energy | 2008 | 242 |
22 | A study of the performance, emission and combustion characteristics of a compression ignition engine using methyl ester of paradise oil–eucalyptus oil blends | Applied Energy | 2009 | 238 |
23 | Wear and mechanical characteristics of Al 7075/graphite composites | Composites Part B: Engineering | 2014 | 235 |
24 | Flat plate solar photovoltaic–thermal (PV/T) systems: A reference guide | Renewable and Sustainable Energy Reviews | 2015 | 230 |
25 | Banana Fiber Reinforced Polymer Composites - A Review | Journal of Reinforced Plastics and Composites | 2010 | 225 |
26 | Effect of injection pressure on performance, emission and combustion characteristics of high linolenic linseed oil methyl ester in a DI diesel engine | Renewable Energy | 2009 | 223 |
27 | Overview of combustion and gasification of rice husk in fluidized bed reactors | Biomass and Bioenergy | 1998 | 219 |
28 | Performance, emission and combustion characteristics of a DI diesel engine using waste plastic oil | Applied Thermal Engineering | 2009 | 218 |
29 | Experimental investigation of the thermo-physical properties of water–ethylene glycol mixture based CNT nanofluids | Thermochimica Acta | 2012 | 211 |
30 | Performance, emission and combustion characteristics of poon oil and its diesel blends in a DI diesel engine | Fuel | 2009 | 210 |
31 | Experimental analysis and numerical modelling of inward solidification on a finned vertical tube for a latent heat storage unit | Solar Energy | 1997 | 209 |
32 | Enhancing the wear resistance of case carburized steel (En 353) by cryogenic treatment | Cryogenics | 2005 | 206 |
33 | Multi response optimization of wire EDM operations using robust design of experiments | International Journal of Advanced Manufacturing Technology | 2006 | 202 |
34 | Characterisation and effect of using waste plastic oil and diesel fuel blends in compression ignition engine | Energy | 2011 | 202 |
35 | Investigations on the performance and exhaust emissions of a diesel engine using preheated waste frying oil as fuel | Renewable Energy | 2005 | 200 |
36 | Graphene decorated with MoS2 nanosheets: a synergetic energy storage composite electrode for supercapacitor applications | Dalton Transactions | 2016 | 200 |
37 | Review on free cooling of buildings using phase change materials | Renewable and Sustainable Energy Reviews | 2010 | 197 |
38 | Abrasive Water Jet Machining process: A state of art of review | Journal of Manufacturing Processes | 2020 | 192 |
39 | Optimization of integrated photovoltaic–wind power generation systems with battery storage | Energy | 2006 | 188 |
40 | The use of tyre pyrolysis oil in diesel engines | Waste Management | 2008 | 188 |
41 | Review of solar cooling methods and thermal storage options | Renewable and Sustainable Energy Reviews | 2011 | 187 |
42 | Performance and emission characteristics of a DI diesel engine with a nanofuel additive | Fuel | 2013 | 187 |
43 | A review on influence of electrical process parameters in EDM process | Archives of Civil and Mechanical Engineering | 2015 | 181 |
44 | Sustainable material selection for construction industry – A hybrid multi criteria decision making approach | Renewable and Sustainable Energy Reviews | 2016 | 180 |
45 | Modeling and multi-response optimization of Inconel 718 on machining of CNC WEDM process | Journal of Materials Processing Technology | 2008 | 175 |
46 | Cryogenic turning of the Ti–6Al–4V alloy with modified cutting tool inserts | Cryogenics | 2011 | 175 |
47 | Thermal management of electronics: A review of literature | Thermal Science | 2008 | 171 |
48 | Assessment of factors influencing surface roughness on the machining of glass fiber-reinforced polymer composites | Materials & Design | 2006 | 169 |
49 | Combustion analysis on a DI diesel engine with hydrogen in dual fuel mode | Fuel | 2008 | 165 |
50 | A comparative study on methanol/diesel and methanol/PODE dual fuel RCCI combustion in an automotive diesel engine | Renewable Energy | 2020 | 161 |