# | Title | Journal | Year | Citations |
---|
1 | Fabrication of extraordinary high-strength magnesium alloy by hot extrusion | Scripta Materialia | 2009 | 495 |
2 | Effect of Zn additions on the age-hardening of Mg–2.0Gd–1.2Y–0.2Zr alloys | Acta Materialia | 2007 | 441 |
3 | Unveiling the formation of basal texture variations based on twinning and dynamic recrystallization in AZ31 magnesium alloy during extrusion | Acta Materialia | 2018 | 352 |
4 | A high-strength Mg–Sn–Zn–Al alloy extruded at low temperature | Scripta Materialia | 2008 | 312 |
5 | Aging Characteristics and High Temperature Tensile Properties of Mg-Gd-Y-Zr Alloys | Materials Transactions | 2001 | 278 |
6 | Chemistry of nanoscale precipitates in Mg–2.1Gd–0.6Y–0.2Zr (at.%) alloy investigated by the atom probe technique | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2005 | 235 |
7 | Creep Properties of Mg-Gd-Y-Zr Alloys | Materials Transactions | 2001 | 220 |
8 | High-strength extruded Mg–Al–Ca–Mn alloy | Scripta Materialia | 2011 | 214 |
9 | Ultra high-strength Mg–Gd–Y–Zn–Zr alloy sheets processed by large-strain hot rolling and ageing | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2012 | 214 |
10 | Precipitation-hardenable Mg–2.4Zn–0.1Ag–0.1Ca–0.16Zr (at.%) wrought magnesium alloy | Acta Materialia | 2009 | 211 |
11 | Bimodally grained microstructure development during hot extrusion of Mg–2.4 Zn–0.1 Ag–0.1 Ca–0.16 Zr (at.%) alloys | Acta Materialia | 2009 | 202 |
12 | Recrystallization mechanism of as-cast AZ91 magnesium alloy during hot compressive deformation | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2009 | 193 |
13 | Dissimilar material laser welding between magnesium alloy AZ31B and aluminum alloy A5052-O | Science and Technology of Advanced Materials | 2005 | 179 |
14 | Monotonic tension, fatigue and creep behavior of SiC-fiber-reinforced SiC-matrix composites: a review | Composites Science and Technology | 1999 | 176 |
15 | Suppression of intermetallic reaction layer formation by controlling heat flow in dissimilar joining of steel and aluminum alloy | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2007 | 176 |
16 | Determination of an Iron Suspension in Water by Laser-Induced Breakdown Spectroscopy with Two Sequential Laser Pulses | Analytical Chemistry | 1996 | 163 |
17 | Recrystallization mechanism and the relationship between grain size and Zener–Hollomon parameter of Mg–Al–Zn–Ca alloys during hot compression | Scripta Materialia | 2010 | 151 |
18 | Solute clustering and grain boundary segregation in extruded dilute Mg–Gd alloys | Scripta Materialia | 2014 | 150 |
19 | Altered ageing behaviour of a nanostructured Mg-8.2Gd-3.8Y-1.0Zn-0.4Zr alloy processed by high pressure torsion | Acta Materialia | 2018 | 143 |
20 | Rare earth texture and improved ductility in a Mg-Zn-Gd alloy after high-speed extrusion | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2016 | 138 |
21 | Review of photovoltaic module cooling methods and performance evaluation of the radiative cooling method | Renewable and Sustainable Energy Reviews | 2019 | 137 |
22 | Numerical simulation of dynamics of premixed flames: flame instability and vortex–flame interaction | Progress in Energy and Combustion Science | 2005 | 135 |
23 | Effect of Microstructural Factors on Tensile Properties of an ECAE-Processed AZ31 Magnesium Alloy | Materials Transactions | 2003 | 130 |
24 | Effects of Mn content and texture on fatigue properties of as-cast and extruded AZ61 magnesium alloys | International Journal of Mechanical Sciences | 2006 | 130 |
25 | Twins, shear bands and recrystallization of a Mg–2.0%Zn–0.8%Gd alloy during rolling | Scripta Materialia | 2011 | 127 |
26 | Enhanced age-hardening and formation of plate precipitates in Mg–Gd–Ag alloys | Scripta Materialia | 2009 | 126 |
27 | Study of the microstructure, texture and tensile properties of as-extruded AZ91 magnesium alloy | Journal of Alloys and Compounds | 2008 | 121 |
28 | Dynamic microstructural changes during hot extrusion and mechanical properties of a Mg–5.0 Zn–0.9 Y–0.16 Zr (wt.%) alloy | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2011 | 121 |
29 | Low-cycle fatigue behavior of Sn-Ag, Sn-Ag-Cu, and Sn-Ag-Cu-Bi lead-free solders | Journal of Electronic Materials | 2002 | 118 |
30 | A general mixed-mode brittle fracture criterion for cracked materials | Engineering Fracture Mechanics | 2006 | 116 |
31 | A numerical and experimental investigation of the modeling of microwave heating for liquid layers using a rectangular wave guide (effects of natural convection and dielectric properties) | Applied Mathematical Modelling | 2002 | 114 |
32 | Effect of Zr addition on the mechanical properties of as-extruded Mg–Zn–Ca–Zr alloys | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2010 | 114 |
33 | Dissimilar joining of Al/Mg light metals by compound casting process | Journal of Materials Science | 2011 | 114 |
34 | Texture weakening and ductility variation of Mg–2Zn alloy with CA or RE addition | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2015 | 113 |
35 | Dynamic microstructural changes in Mg–9Al–1Zn alloy during hot compression | Scripta Materialia | 2009 | 111 |
36 | A flow law for anisotropic ice and its application to ice sheets | Earth and Planetary Science Letters | 1994 | 108 |
37 | Microstructures and mechanical properties of high-strength Mg–Gd–Y–Zn–Zr alloy sheets processed by severe hot rolling | Journal of Alloys and Compounds | 2012 | 101 |
38 | Development of dilute Mg–Zn–Ca–Mn alloy with high performance via extrusion | Journal of Alloys and Compounds | 2016 | 101 |
39 | Effect of Mg17Al12 precipitates on the microstructural changes and mechanical properties of hot compressed AZ91 magnesium alloy | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2009 | 100 |
40 | Improving strength and ductility of Mg–Gd–Y–Zn–Zr alloy simultaneously via extrusion, hot rolling and ageing | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2015 | 100 |
41 | Project of Platform Science and Technology for Advanced Magnesium Alloys | Materials Transactions | 2001 | 99 |
42 | Effect of Mn addition on microstructure, texture and mechanical properties of Mg–Zn–Ca alloy | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2011 | 98 |
43 | Thermoelectric properties of some metal borides | Journal of Solid State Chemistry | 2004 | 96 |
44 | Effect of Ca/Al ratio on microstructure and mechanical properties of Mg-Al-Ca-Mn alloys | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2017 | 96 |
45 | Microstructure evolution and mechanical properties of a high strength Mg-11.7Gd-4.9Y-0.3Zr (wt%) alloy prepared by pre-deformation annealing, hot extrusion and ageing | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2017 | 95 |
46 | Determination of colloidal iron in water by laser-induced breakdown spectroscopy | Analytica Chimica Acta | 1995 | 91 |
47 | Influence of Mn content on mechanical properties and fatigue behavior of extruded Mg alloys | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2006 | 91 |
48 | Low cycle fatigue test for solders using non-contact digital image measurement system | International Journal of Fatigue | 2002 | 90 |
49 | Microstructure and mechanical properties of magnesium composites prepared by spark plasma sintering technology | Journal of Alloys and Compounds | 2011 | 89 |
50 | Enhanced corrosion and wear resistances by graphene oxide coating on the surface of Mg-Zn-Ca alloy | Carbon | 2016 | 87 |