| # | Title | Journal | Year | Citations |
|---|
| 1 | Ferromagnetism of zinc oxide nanograined films | JETP Letters | 2013 | 109 |
| 2 | Effect of ageing treatment on the microstructures and mechanical properties of the extruded Mg–7Y–4Gd–1.5Zn–0.4Zr alloy | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2010 | 101 |
| 3 | Crystal Structures and Thermoelectric Properties of Layered Compounds in the ATe–Bi2Te3(A = Ge, Sn, Pb) Systems | Inorganic Materials | 2004 | 98 |
| 4 | Casting alloys of the Al–Ce–Ni system: microstructural approach to alloy design | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 1999 | 78 |
| 5 | Synthesis and structure of layered compounds in the PbTe-Bi2Te3 and PbTe-Sb2Te3 systems | Inorganic Materials | 2004 | 70 |
| 6 | Unmodified hydrated С60 fullerene molecules exhibit antioxidant properties, prevent damage to DNA and proteins induced by reactive oxygen species and protect mice against injuries caused by radiation-induced oxidative stress | Nanomedicine: Nanotechnology, Biology, and Medicine | 2019 | 63 |
| 7 | Pulsed laser deposition of composite Mo–Se–Ni–C coatings using standard and shadow mask configuration | Surface and Coatings Technology | 2012 | 60 |
| 8 | Experimental and numerical study of the chemical composition of WSe thin films obtained by pulsed laser deposition in vacuum and in a buffer gas atmosphere | Applied Surface Science | 2012 | 59 |
| 9 | Microstructures and mechanical properties of extruded Mg–8Gd–0.4Zr alloys containing Zn | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2009 | 58 |
| 10 | Calcium phosphate bone cements | Inorganic Materials | 2011 | 54 |
| 11 | Oxyfluoride glasses (A review) | Glass Physics and Chemistry | 2011 | 52 |
| 12 | The Effect of Gold Nanoparticle Concentration and Laser Fluence on the Laser-Induced Water Decomposition | Journal of Physical Chemistry B | 2019 | 51 |
| 13 | Discovery of carbon-based strongest and hardest amorphous material | National Science Review | 2022 | 49 |
| 14 | Effect of the long periodic stacking structure and W-phase on the microstructures and mechanical properties of the Mg–8Gd–xZn–0.4Zr alloys | Materials & Design | 2010 | 46 |
| 15 | Reduction of iron oxides during the pyrometallurgical processing of red mud | Russian Metallurgy (Metally) | 2013 | 44 |
| 16 | Interactions of calcium phosphates with chitosan | Doklady Chemistry | 2011 | 39 |
| 17 | Structure formation, phase transformations and properties in Cr–Ni austenitic steel after equal-channel angular pressing and heating | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2007 | 38 |
| 18 | The shear strength of three-dimensional capillary-porous titanium coatings for intraosseous implants | Materials Science and Engineering C | 2016 | 38 |
| 19 | Biocompatibility of new materials based on nano-structured nitinol with titanium and tantalum composite surface layers: experimental analysis in vitro and in vivo | Journal of Materials Science: Materials in Medicine | 2018 | 38 |
| 20 | Strength of ultrafine-grained corrosion-resistant steels after severe plastic deformation | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2004 | 37 |
| 21 | Oxidation of titanium-vanadium slags with the participation of Na2O and its effect on the behavior of vanadium | Russian Metallurgy (Metally) | 2008 | 37 |
| 22 | Nanocrystalline hydroxyapatite ceramics produced by low-temperature sintering after high-pressure treatment | Doklady Chemistry | 2008 | 36 |
| 23 | High-temperature heat capacity and thermodynamic properties of Tb2Sn2O7 | Inorganic Materials | 2017 | 36 |
| 24 | Hot-pressed ceramic SiC–YAG materials | Inorganic Materials | 2017 | 36 |
| 25 | The enhancement of hydroxyapatite thermal stability by Al doping | Journal of Materials Research and Technology | 2020 | 35 |
| 26 | Phase relations in the Bi2O3-TiO2 system | Russian Journal of Inorganic Chemistry | 2015 | 34 |
| 27 | Determination of oxygen in W-C-Co nanopowders | Inorganic Materials | 2008 | 33 |
| 28 | Effect of Zn concentration on the microstructures and mechanical properties of extruded Mg–7Y–4Gd–0.4Zr alloys | Journal of Materials Science | 2009 | 33 |
| 29 | Effect of Si additions on the microstructure and mechanical properties of hot-pressed B4C | Inorganic Materials | 2017 | 32 |
| 30 | Genesis of the anomalous Hall effect in CeAl2 | Journal of Experimental and Theoretical Physics | 2004 | 31 |
| 31 | Synthesis and dry sliding behavior of composite coating with (R–OOO)FT polyimide matrix and tungsten disulfide nanoparticle filler | Inorganic Materials: Applied Research | 2017 | 30 |
| 32 | Surface tension of ultrafine particles | Scripta Materialia | 1999 | 29 |
| 33 | Osteoinductive ceramic materials for bone tissue restoration: Octacalcium phosphate (review) | Inorganic Materials: Applied Research | 2010 | 29 |
| 34 | Shadow masked pulsed laser deposition of WSex films: Experiment and modeling | Applied Surface Science | 2013 | 29 |
| 35 | Thermoelectric and mechanical properties of the Bi0.5Sb1.5Te3 solid solution prepared by melt spinning | Inorganic Materials | 2013 | 28 |
| 36 | Effect of hot isostatic pressing on structure and properties of intermetallic NiAl–Cr–Mo alloy produced by selective laser melting | Intermetallics | 2020 | 28 |
| 37 | Structure and Mechanical and Corrosion Properties of a Magnesium Mg–Y–Nd–Zr Alloy after High Pressure Torsion | Russian Metallurgy (Metally) | 2017 | 27 |
| 38 | Extruded thermoelectric materials based on Bi2Te3-Bi2Se3 solid solutions | Inorganic Materials | 2009 | 26 |
| 39 | Iron nanoparticles as a food additive for poultry | Doklady Biological Sciences | 2011 | 26 |
| 40 | Anisotropic thermoelectric properties of the layered compounds PbSb2Te4 and PbBi4Te7 | Inorganic Materials | 2007 | 25 |
| 41 | IR-spectroscopic examination of polytetrafluoroethylene and its modified forms | Russian Journal of General Chemistry | 2009 | 25 |
| 42 | Density and surface tension of heavy liquid-metal coolants: Gallium and indium | Inorganic Materials: Applied Research | 2011 | 25 |
| 43 | Conversion of synthesis gas into alcohols on supported cobalt-molybdenum sulfide catalysts promoted with potassium | Kinetics and Catalysis | 2013 | 25 |
| 44 | On friction of metallic materials with consideration for superplasticity phenomenon | Inorganic Materials: Applied Research | 2017 | 25 |
| 45 | Molding Features of Silicon Carbide Products by the Method of Hot Slip Casting | Inorganic Materials: Applied Research | 2018 | 25 |
| 46 | Plasma-assisted processes for manufacturing nanosized powder materials | High Energy Chemistry | 2006 | 24 |
| 47 | Hydrophobic properties of composite fluoropolymer coatings on titanium | Protection of Metals and Physical Chemistry of Surfaces | 2011 | 24 |
| 48 | Multiparametric optimization of laser cutting of steel sheets | Inorganic Materials: Applied Research | 2015 | 24 |
| 49 | Tribological properties of gradient Mo–Se–Ni–C thin films obtained by pulsed laser deposition in standard and shadow mask configurations | Thin Solid Films | 2014 | 23 |
| 50 | Comparative Evaluation of Spinach Biofortification with Selenium Nanoparticles and Ionic Forms of the Element | Nanotechnologies in Russia | 2017 | 23 |
