# | Title | Journal | Year | Citations |
---|
1 | Fatigue behavior of high-Mn TWIP steels | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2009 | 128 |
2 | Effect of austenite grain structure on the strength and toughness of direct-quenched martensite | Journal of Alloys and Compounds | 2013 | 89 |
3 | Hot ductility behaviour of high-Mn TWIP steels | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2011 | 86 |
4 | Contribution of deformation mechanisms to strength and ductility in two Cr–Mn grade austenitic stainless steels | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2013 | 85 |
5 | Phase transition revealed by Raman spectroscopy in screen‐printed lead zirconate titanate thick films | Journal of Applied Physics | 1994 | 39 |
6 | The Influence of Ti on the Hot Ductility of Nb-bearing Steels in Simulated Continuous Casting Process. | ISIJ International | 2002 | 33 |
7 | Fatigue behavior of ultrafine-grained and coarse-grained Cr–Ni austenitic stainless steels | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2011 | 32 |
8 | Design of a new Ni-free austenitic stainless steel with unique ultrahigh strength-high ductility synergy | Materials & Design | 2014 | 29 |
9 | Application of Kolmogorov–Johnson–Mehl–Avrami equations to non-isothermal conditions | Computational Materials Science | 2010 | 26 |
10 | Non-destructive determination of the yield strength and flow properties of high-manganese twinning-induced plasticity steel | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2012 | 24 |
11 | Effect of Nitrogen Content on Grain Refinement and Mechanical Properties of a Reversion-Treated Ni-Free 18Cr-12Mn Austenitic Stainless Steel | Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science | 2014 | 23 |
12 | Raman spectra in laser ablated lead zirconate titanate thin films near the morphotropic phase boundary | Journal of Applied Physics | 1995 | 21 |
13 | Coercivity and power spectrum of Barkhausen noise in structural steels | Journal of Magnetism and Magnetic Materials | 1986 | 20 |
14 | The Hot Strength of Industrial Cokes – Evaluation of Coke Properties that Affect Its High‐Temperature Strength | Steel Research International | 2014 | 15 |
15 | Stress response of Barkhausen noise in a tempered C-Mn steel | Journal of Magnetism and Magnetic Materials | 1987 | 14 |
16 | Investigation of effects of processing on stretch-flangeability of the ultra-high strength, vanadium-bearing dual-phase steels | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2020 | 14 |
17 | Stress response of Barkhausen noise and coercive force in 9Ni steel | Journal of Magnetism and Magnetic Materials | 1987 | 12 |
18 | Enhanced thermal fatigue endurance and lifetime prediction of lead‐free LGA joints in LTCC modules | Soldering and Surface Mount Technology | 2011 | 10 |
19 | Martensitic Transformation During Cold Rolling Deformation of an Austenitic Fe-26Mn-0.14C Alloy | Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science | 2012 | 10 |
20 | Influence of Thermal-Cycling-Induced Failures on the RF Performance of Ceramic Antenna Assemblies | IEEE Transactions on Components, Packaging and Manufacturing Technology | 2011 | 9 |
21 | T0 – T28J Correlation of Low-carbon Ultra-high-strength Quenched Steels | | 2014 | 8 |
22 | Investigation of the critical factors controlling sheared edge stretching of ultra-high strength dual-phase steels | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2021 | 8 |
23 | Lifetime prediction and design aspects of reliable lead-free non-collapsible BGA joints in LTCC packages for RF/microwave telecommunication applications | Soldering and Surface Mount Technology | 2014 | 7 |
24 | Screen-Printed Superconducting Y-Ba-Cu-O Thick Films on Various Substrates | Active and Passive Electronic Components | 1989 | 6 |
25 | Ni3Al and Ni3Si-based intermetallics produced by the Osprey process | Intermetallics | 1996 | 6 |
26 | Lifetime Prediction of Non-Collapsible Solder Joints in LTCC/PWB Assemblies Using a Recalibrated Engelmaier's Model | IEEE Transactions on Components, Packaging and Manufacturing Technology | 2012 | 6 |
27 | Melt-textured screen-printed (Bi, Pb)SrCaCuO superconducting thick films based on oxalate precursor powders | Materials Letters | 1989 | 5 |
28 | Compositional and structural behaviour of screen-printed pzt thick films during rapid sintering | Ferroelectrics | 1994 | 5 |
29 | Stress response of Barkhausen noise in high carbon steel cables and ropes | Journal of Magnetism and Magnetic Materials | 1994 | 4 |
30 | Evaluation of PZT thin films on Ag coated Si substrates | Journal of Electronic Materials | 1994 | 4 |
31 | The development and characterization of ultra high GIGA-strength ferritic hot band steels | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2020 | 3 |
32 | DUCTILITY IN SPRAY DEPOSITED Ni3Al-BASED INTERMETALLIC COMPOUNDS | Scripta Materialia | 1997 | 2 |
33 | Surface Mounted Joints on Different Substrate Materials | Microelectronics International | 1991 | 0 |
34 | Influence Of Tensile Stress Of Steel Ropes On Magnetic Barkhausen Noise | | 1993 | 0 |
35 | Zirconium-enriched particles in spray-deposited Ni3Al-based alloys | Scripta Materialia | 1998 | 0 |
36 | Effect of Annealing Conditions on the Texture and Normal Anisotropy of Al-Killed Steels in Simulated Batch Annealing | Steel Research International | 2004 | 0 |
37 | Annealing Studies of Hsla Steels Using EBSD | | 0 | 0 |