# | Title | Journal | Year | Citations |
---|
1 | Thermal Barrier Coatings for Gas-Turbine Engine Applications | Science | 2002 | 3,626 |
2 | Wavelets for fault diagnosis of rotary machines: A review with applications | Signal Processing | 2014 | 1,081 |
3 | An experimental and detailed chemical kinetic modeling study of hydrogen and syngas mixture oxidation at elevated pressures | Combustion and Flame | 2013 | 589 |
4 | Piezoelectric Biomaterials for Sensors and Actuators | Advanced Materials | 2019 | 477 |
5 | The mechanics of size-dependent indentation | Journal of the Mechanics and Physics of Solids | 1998 | 369 |
6 | Advances and Unsolved Issues in Pulsating Heat Pipes | Heat Transfer Engineering | 2008 | 366 |
7 | Review and advances of direct methanol fuel cells (DMFCs) part I: Design, fabrication, and testing with high concentration methanol solutions | Journal of Power Sources | 2013 | 350 |
8 | Failure modes in plasma-sprayed thermal barrier coatings | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2003 | 348 |
9 | Bioprinting for cancer research | Trends in Biotechnology | 2015 | 313 |
10 | Review and Advances in Heat Pipe Science and Technology | Journal of Heat Transfer | 2012 | 309 |
11 | Permutation entropy: A nonlinear statistical measure for status characterization of rotary machines | Mechanical Systems and Signal Processing | 2012 | 301 |
12 | Preprocessing-Free Gear Fault Diagnosis Using Small Datasets With Deep Convolutional Neural Network-Based Transfer Learning | IEEE Access | 2018 | 294 |
13 | A Novel Active Vibration Absorption Technique: Delayed Resonator | Journal of Sound and Vibration | 1994 | 288 |
14 | Characterization of Gas Diffusion Layers for PEMFC | Journal of the Electrochemical Society | 2004 | 288 |
15 | A comprehensive experimental and modeling study of isobutene oxidation | Combustion and Flame | 2016 | 282 |
16 | Skeletal mechanism generation for surrogate fuels using directed relation graph with error propagation and sensitivity analysis | Combustion and Flame | 2010 | 281 |
17 | A new dynamic model for predicting transient phenomena in a PEM fuel cell system | Renewable Energy | 2005 | 277 |
18 | Thermal Modeling of Unlooped and Looped Pulsating Heat Pipes | Journal of Heat Transfer | 2001 | 275 |
19 | An experimental and modeling study of propene oxidation. Part 2: Ignition delay time and flame speed measurements | Combustion and Flame | 2015 | 270 |
20 | Development and implementation of plasma sprayed nanostructured ceramic coatings | Surface and Coatings Technology | 2001 | 264 |
21 | 3D-printed microfluidic devices | Biofabrication | 2016 | 259 |
22 | Biodegradable Piezoelectric Force Sensor | Proceedings of the National Academy of Sciences of the United States of America | 2018 | 259 |
23 | Challenges and opportunities of thermal management issues related to fuel cell technology and modeling | International Journal of Heat and Mass Transfer | 2005 | 253 |
24 | A physics-based approach to modeling real-fuel combustion chemistry – II. Reaction kinetic models of jet and rocket fuels | Combustion and Flame | 2018 | 247 |
25 | Prognosis of Defect Propagation Based on Recurrent Neural Networks | IEEE Transactions on Instrumentation and Measurement | 2011 | 233 |
26 | A geometry projection method for continuum-based topology optimization with discrete elements | Computer Methods in Applied Mechanics and Engineering | 2015 | 233 |
27 | Towards durable thermal barrier coatings with novelmicrostructures deposited by solution-precursor plasma spray | Acta Materialia | 2001 | 230 |
28 | Fabrication and evaluation of plasma sprayed nanostructured alumina–titania coatings with superior properties | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2001 | 222 |
29 | Direct numerical simulations of ignition of a lean n-heptane/air mixture with temperature inhomogeneities at constant volume: Parametric study | Combustion and Flame | 2011 | 222 |
30 | Bio-inspired sensitive and reversible mechanochromisms via strain-dependent cracks and folds | Nature Communications | 2016 | 211 |
31 | Blowoff dynamics of bluff body stabilized turbulent premixed flames | Combustion and Flame | 2010 | 210 |
32 | Heat pipe heat exchangers and heat sinks: Opportunities, challenges, applications, analysis, and state of the art | International Journal of Heat and Mass Transfer | 2015 | 200 |
33 | Flat Miniature Heat Pipes With Micro Capillary Grooves | Journal of Heat Transfer | 1999 | 186 |
34 | Nondestructive Reconstruction and Analysis of SOFC Anodes Using X-ray Computed Tomography at Sub-50 nm Resolution | Journal of the Electrochemical Society | 2008 | 186 |
35 | A compact skeletal mechanism for n-dodecane with optimized semi-global low-temperature chemistry for diesel engine simulations | Fuel | 2017 | 186 |
36 | Enhancement of latent heat energy storage using embedded heat pipes | International Journal of Heat and Mass Transfer | 2011 | 178 |
37 | Healing of Thermoplastic Polymers at an Interface under Nonisothermal Conditions | Macromolecules | 2002 | 177 |
38 | Recent development in studies of alternative jet fuel combustion: Progress, challenges, and opportunities | Renewable and Sustainable Energy Reviews | 2016 | 175 |
39 | Compositional effects on the ignition of FACE gasolines | Combustion and Flame | 2016 | 174 |
40 | Experimental studies on the combustion characteristics of alternative jet fuels | Fuel | 2012 | 172 |
41 | A network thermodynamic analysis of the heat pipe | International Journal of Heat and Mass Transfer | 1998 | 170 |
42 | Measurement and Prediction of Electrical Contact Resistance Between Gas Diffusion Layers and Bipolar Plate for Applications to PEM Fuel Cells | Journal of Fuel Cell Science and Technology | 2004 | 170 |
43 | A comprehensive iso-octane combustion model with improved thermochemistry and chemical kinetics | Combustion and Flame | 2017 | 164 |
44 | The effect of nanotube radius on the constitutive model for carbon nanotubes | Computational Materials Science | 2003 | 160 |
45 | A Dusty Fluid Model for Predicting Hydroxyl Anion Conductivity in Alkaline Anion Exchange Membranes | Journal of the Electrochemical Society | 2010 | 157 |
46 | Stress-based shape and topology optimization with the level set method | Computer Methods in Applied Mechanics and Engineering | 2018 | 149 |
47 | Grinding induced damage in ceramics | Journal of Materials Processing Technology | 2003 | 148 |
48 | Structural damage detection using neural network with learning rate improvement | Computers and Structures | 2005 | 147 |
49 | Enhancement of PCM melting in enclosures with horizontally-finned internal surfaces | International Journal of Heat and Mass Transfer | 2011 | 144 |
50 | Thermal/residual stress in an electron beam physical vapor deposited thermal barrier coating system | Acta Materialia | 1998 | 139 |