| # | Title | Journal | Year | Citations |
|---|
| 1 | Hybrid Tabu Search Hopfield Recurrent ANN Fuzzy Technique to the Production Planning Problems | International Journal of Manufacturing, Materials, and Mechanical Engineering | 2012 | 27 |
| 2 | Electroless Nickel-Phosphorus Composite Coatings | International Journal of Manufacturing, Materials, and Mechanical Engineering | 2016 | 17 |
| 3 | Study on Slurry Paste Boronizing of 410 Martensitic Stainless Steel Using Taguchi Based Desirability Analysis (TDA) | International Journal of Manufacturing, Materials, and Mechanical Engineering | 2015 | 13 |
| 4 | Determination of Optimum Parameters for Multi-Performance Characteristic in Turning of Al 6061-6% ZrB2 in-situ Metal Matrix Composite Using Grey Relational Analysis | International Journal of Manufacturing, Materials, and Mechanical Engineering | 2012 | 12 |
| 5 | Recycling of Waste Epoxy-Polyester Powders for Foam Production | International Journal of Manufacturing, Materials, and Mechanical Engineering | 2011 | 11 |
| 6 | Multi-Objective Optimization of EDM Process Parameters using Taguchi Method, Principal Component Analysis and Grey Relational Analysis | International Journal of Manufacturing, Materials, and Mechanical Engineering | 2014 | 11 |
| 7 | Experimentation and Analysis into Micro-Hole Machining of Ti-6Al-4V by Micro-EDM Using Boron Carbide Powder Mixed De-Ionized Water | International Journal of Manufacturing, Materials, and Mechanical Engineering | 2014 | 11 |
| 8 | Robots in Medicine | International Journal of Manufacturing, Materials, and Mechanical Engineering | 2017 | 10 |
| 9 | Optimal Design and Fabrication of Shoe Lasts for Ankle Foot Orthotics for Patients With Diabetes | International Journal of Manufacturing, Materials, and Mechanical Engineering | 2019 | 10 |
| 10 | Neural Network Based Modelling and GRA Coupled PCA Optimization of Hole Sinking Electro Discharge Micromachining | International Journal of Manufacturing, Materials, and Mechanical Engineering | 2014 | 9 |
| 11 | Development of an Optimization Framework for Parameter Identification and Shape Optimization Problems in Engineering | International Journal of Manufacturing, Materials, and Mechanical Engineering | 2011 | 9 |
| 12 | Study and Simulation of a Hydropneumatic Suspension for Telescopic Handler Vehicles | International Journal of Manufacturing, Materials, and Mechanical Engineering | 2018 | 9 |
| 13 | Antimycotic Activity of Nanoparticles of MgO, FeO and ZnO on some Pathogenic Fungi | International Journal of Manufacturing, Materials, and Mechanical Engineering | 2012 | 8 |
| 14 | Multi-Response Optimization of Electrochemical Machining of Al-Si/B4C Composites Using RSM | International Journal of Manufacturing, Materials, and Mechanical Engineering | 2013 | 8 |
| 15 | Application of the Entropy Weight and TOPSIS Method on Al–12% SiC Metal Matrix Composite during EDM | International Journal of Manufacturing, Materials, and Mechanical Engineering | 2014 | 8 |
| 16 | Mechanical Strength Of Nafion®/ZrO2 Nano-Composite Membrane | International Journal of Manufacturing, Materials, and Mechanical Engineering | 2018 | 8 |
| 17 | Material Selection Using a Novel Multiple Attribute Decision Making Method | International Journal of Manufacturing, Materials, and Mechanical Engineering | 2011 | 7 |
| 18 | An Experimental Investigation during Micro Machining of E-Glass-Fibre-Epoxy Composite on Developed Electrochemical Spark Machining Setup | International Journal of Manufacturing, Materials, and Mechanical Engineering | 2012 | 7 |
| 19 | Multiresponse Analysis in Abrasive Waterjet Machining Process on AA 6351 | International Journal of Manufacturing, Materials, and Mechanical Engineering | 2014 | 7 |
| 20 | A Review on Fabricating Procedures in Rapid Prototyping | International Journal of Manufacturing, Materials, and Mechanical Engineering | 2016 | 7 |
| 21 | Comprehensive Considerations on Material Selection for Lightweighting Vehicle Bodies Based on Material Costs and Assembly Joining Technologies | International Journal of Manufacturing, Materials, and Mechanical Engineering | 2017 | 7 |
| 22 | Design and Feasibility Test of an Indigenous Motorized Wheel for Manual Wheelchair | International Journal of Manufacturing, Materials, and Mechanical Engineering | 2019 | 7 |
| 23 | Biomechanical Study of Lumbar Spine (L2-L4) Using Hybrid Stabilization Device - A Finite Element Analysis | International Journal of Manufacturing, Materials, and Mechanical Engineering | 2020 | 7 |
| 24 | Roughness Optimization of Electroless Ni-B Coatings Using Taguchi Method | International Journal of Manufacturing, Materials, and Mechanical Engineering | 2011 | 6 |
| 25 | Application of Grey Taguchi based Response Surface Methodology (GT-RSM) in Injection Moulding of Polypropylene/E-glass Composite | International Journal of Manufacturing, Materials, and Mechanical Engineering | 2015 | 6 |
| 26 | Finite Element Analysis of Automotive Disk Brake and Pad in Frictional Model Contact | International Journal of Manufacturing, Materials, and Mechanical Engineering | 2015 | 6 |
| 27 | Optimization of Drilling Process on Al-SiC Composite using Grey Relation Analysis | International Journal of Manufacturing, Materials, and Mechanical Engineering | 2015 | 6 |
| 28 | Flexural Strength Improvement of Welded Joints Prepared by Vibratory Welding Process | International Journal of Manufacturing, Materials, and Mechanical Engineering | 2015 | 6 |
| 29 | Effect of Heat Treatment on Microstructure and Tensile Properties of A356/V2O5 Insitu Composites | International Journal of Manufacturing, Materials, and Mechanical Engineering | 2016 | 6 |
| 30 | Fuzzy Logic Based Path Planning for Industrial Robot | International Journal of Manufacturing, Materials, and Mechanical Engineering | 2018 | 6 |
| 31 | Using Vegetable-Oil-Based Sustainable Metal Working Fluids to Promote Green Manufacturing | International Journal of Manufacturing, Materials, and Mechanical Engineering | 2020 | 6 |
| 32 | Response Surface Modeling and Grey Relational Analysis to Optimize Turning Parameters with Multiple Performance Characteristics | International Journal of Manufacturing, Materials, and Mechanical Engineering | 2012 | 5 |
| 33 | Multivariate Optimization of the Cutting Parameters when Turning Slender Components | International Journal of Manufacturing, Materials, and Mechanical Engineering | 2012 | 5 |
| 34 | A New Calculation Method for Belleville Disc Springs with Contact Flats and Reduced Thickness | International Journal of Manufacturing, Materials, and Mechanical Engineering | 2013 | 5 |
| 35 | Intelligent Modelling and Multi-Objective Optimisation of Laser Beam Cutting of Nickel Based Superalloy Sheet | International Journal of Manufacturing, Materials, and Mechanical Engineering | 2013 | 5 |
| 36 | Optimization of Cutting Parameters using Cryogenically Treated High Speed Steel Tool by Taguchi Application | International Journal of Manufacturing, Materials, and Mechanical Engineering | 2013 | 5 |
| 37 | Application of Response Surface Methodology to Predict Ovality of AA6082 Flow Formed Tubes | International Journal of Manufacturing, Materials, and Mechanical Engineering | 2013 | 5 |
| 38 | Optimization Studies on Electroless Nickel Coatings | International Journal of Manufacturing, Materials, and Mechanical Engineering | 2014 | 5 |
| 39 | Parameter Design of High-Resolution E-Jet Micro-Fabrication Process by Taguchi Utility Approach | International Journal of Manufacturing, Materials, and Mechanical Engineering | 2018 | 5 |
| 40 | An Optimal Image Processing Method for Simultaneous Detection of Weld Seam Position and Weld Gap in Robotic Arc Welding | International Journal of Manufacturing, Materials, and Mechanical Engineering | 2018 | 5 |
| 41 | Evaluating Optimal Parameters for Machining Selective Laser Melting Titanium Alloy Using Wire Cut Electrical Discharge Machining | International Journal of Manufacturing, Materials, and Mechanical Engineering | 2020 | 5 |
| 42 | On Performance of Electrochemical Discharge Micro-Machining Process Using Different Electrolytes and Tool Shapes | International Journal of Manufacturing, Materials, and Mechanical Engineering | 2020 | 5 |
| 43 | Effect of Printing Parameters on Compressive Strength of Additively Manufactured Porous Bone Scaffolds Using Taguchi Method | International Journal of Manufacturing, Materials, and Mechanical Engineering | 2021 | 5 |
| 44 | Evaluation and Repair of Cracks on Statically Loaded Beams Using Piezoelectric Actuation | International Journal of Manufacturing, Materials, and Mechanical Engineering | 2021 | 5 |
| 45 | Dynamic Behaviour and Crack Detection of a Multi Cracked Rotating Shaft using Adaptive Neuro-Fuzzy-Inference System | International Journal of Manufacturing, Materials, and Mechanical Engineering | 2016 | 5 |
| 46 | A Particle Swarm Optimization Approach for Minimizing GD&T Error in Additive Manufactured Parts | International Journal of Manufacturing, Materials, and Mechanical Engineering | 2017 | 5 |
| 47 | Simulation and Reliability Analysis of Laser-Welded Blanks after Metal Surface Finishing Process | International Journal of Manufacturing, Materials, and Mechanical Engineering | 2012 | 5 |
| 48 | Hybrid Line Search and Simulated Annealing For Production Planning System in Industrial Engineering | International Journal of Manufacturing, Materials, and Mechanical Engineering | 2014 | 5 |
| 49 | A Finite Element Study of Chip Formation Process in Orthogonal Machining | International Journal of Manufacturing, Materials, and Mechanical Engineering | 2011 | 4 |
| 50 | Laser Bending of 5005 Aluminum Alloy Sheets | International Journal of Manufacturing, Materials, and Mechanical Engineering | 2012 | 4 |
