# | Title | Journal | Year | Citations |
---|
1 | High-Entropy Alloys: A Critical Review | Materials Research Letters | 2014 | 2,186 |
2 | Heterogeneous materials: a new class of materials with unprecedented mechanical properties | Materials Research Letters | 2017 | 818 |
3 | Back stress strengthening and strain hardening in gradient structure | Materials Research Letters | 2016 | 766 |
4 | Perspective on hetero-deformation induced (HDI) hardening and back stress | Materials Research Letters | 2019 | 638 |
5 | Heterostructured materials: superior properties from hetero-zone interaction | Materials Research Letters | 2021 | 505 |
6 | A Novel Low-Density, High-Hardness, High-entropy Alloy with Close-packed Single-phase Nanocrystalline Structures | Materials Research Letters | 2015 | 468 |
7 | Synergetic Strengthening by Gradient Structure | Materials Research Letters | 2014 | 442 |
8 | Biomass-derived renewable carbon materials for electrochemical energy storage | Materials Research Letters | 2017 | 402 |
9 | Microstructures and properties of high-entropy alloy films and coatings: a review | Materials Research Letters | 2018 | 345 |
10 | Ultrafine-Grained AlCoCrFeNi2.1Eutectic High-Entropy Alloy | Materials Research Letters | 2016 | 296 |
11 | Is the energy density a reliable parameter for materials synthesis by selective laser melting? | Materials Research Letters | 2017 | 294 |
12 | A Critical Review of the Oxidation of Ti2AlC, Ti3AlC2and Cr2AlC in Air | Materials Research Letters | 2013 | 286 |
13 | Criterion for Sigma Phase Formation in Cr- and V-Containing High-Entropy Alloys | Materials Research Letters | 2013 | 280 |
14 | Fundamentals of Superior Properties in Bulk NanoSPD Materials | Materials Research Letters | 2016 | 280 |
15 | Ultrastrong Mg Alloy via Nano-spaced Stacking Faults | Materials Research Letters | 2013 | 268 |
16 | Hexagonal High-entropy Alloys | Materials Research Letters | 2015 | 239 |
17 | Multicomponent equiatomic rare earth oxides | Materials Research Letters | 2017 | 236 |
18 | Strength and plasticity of nanolaminated materials | Materials Research Letters | 2017 | 224 |
19 | Physically founded phonon dispersions of few-layer materials and the case of borophene | Materials Research Letters | 2016 | 216 |
20 | Nanomaterials by severe plastic deformation: review of historical developments and recent advances | Materials Research Letters | 2022 | 215 |
21 | The origin of high-density dislocations in additively manufactured metals | Materials Research Letters | 2020 | 187 |
22 | Analyzing the effects of powder and post-processing on porosity and properties of electron beam melted Ti-6Al-4V | Materials Research Letters | 2017 | 183 |
23 | Pure-Shuffle Nucleation of Deformation Twins in Hexagonal-Close-Packed Metals | Materials Research Letters | 2013 | 181 |
24 | Additional hardening in harmonic structured materials by strain partitioning and back stress | Materials Research Letters | 2018 | 179 |
25 | Twinning and De-twinning via Glide and Climb of Twinning Dislocations along Serrated Coherent Twin Boundaries in Hexagonal-close-packed Metals | Materials Research Letters | 2013 | 173 |
26 | Stability and strength of atomically thin borophene from first principles calculations | Materials Research Letters | 2017 | 172 |
27 | Simultaneously high-energy storage density and responsivity in quasi-hysteresis-free Mn-doped Bi0.5Na0.5TiO3-BaTiO3-(Sr0.7Bi0.2□0.1)TiO3 ergodic relaxor ceramics | Materials Research Letters | 2018 | 168 |
28 | Cryogenic-deformation-induced phase transformation in an FeCoCrNi high-entropy alloy | Materials Research Letters | 2018 | 164 |
29 | Growth and characterization of α-, β-, and ϵ-phases of Ga2O3 using MOCVD and HVPE techniques | Materials Research Letters | 2018 | 163 |
30 | Design and tensile properties of a bcc Ti-rich high-entropy alloy with transformation-induced plasticity | Materials Research Letters | 2017 | 153 |
31 | Optimizing Hybridization of 1T and 2H Phases in MoS2Monolayers to Improve Capacitances of Supercapacitors | Materials Research Letters | 2015 | 149 |
32 | Mechanics and Mechanically Tunable Band Gap in Single-Layer Hexagonal Boron-Nitride | Materials Research Letters | 2013 | 141 |
33 | Novel Co-rich high entropy alloys with superior tensile properties | Materials Research Letters | 2019 | 139 |
34 | Superior tensile properties of 1%C-CoCrFeMnNi high-entropy alloy additively manufactured by selective laser melting | Materials Research Letters | 2020 | 135 |
35 | Achievement of a table-like magnetocaloric effect in the dual-phase ErZn2/ErZn composite | Materials Research Letters | 2018 | 132 |
36 | Strong grain-size effect on deformation twinning of an Al0.1CoCrFeNi high-entropy alloy | Materials Research Letters | 2017 | 131 |
37 | Formation, structure and properties of biocompatible TiZrHfNbTa high-entropy alloys | Materials Research Letters | 2019 | 131 |
38 | Ultrastrong, Stiff and Multifunctional Carbon Nanotube Composites | Materials Research Letters | 2013 | 130 |
39 | Stabilizing nanoprecipitates in Al-Cu alloys for creep resistance at 300°C | Materials Research Letters | 2019 | 130 |
40 | Selective laser melting enabling the hierarchically heterogeneous microstructure and excellent mechanical properties in an interstitial solute strengthened high entropy alloy | Materials Research Letters | 2019 | 129 |
41 | A Nanolaminated Magnetic Phase: Mn2GaC | Materials Research Letters | 2014 | 128 |
42 | Solid-Solution CrCoCuFeNi High-Entropy Alloy Thin Films Synthesized by Sputter Deposition | Materials Research Letters | 2015 | 127 |
43 | Transparent, conductive solution processed spincast 2D Ti2CTx (MXene) films | Materials Research Letters | 2017 | 127 |
44 | Nanoporous Gold—Testing Macro-scale Samples to Probe Small-scale Mechanical Behavior | Materials Research Letters | 2016 | 121 |
45 | A second criterion for sigma phase formation in high-entropy alloys | Materials Research Letters | 2016 | 119 |
46 | Mesoporous MXene powders synthesized by acid induced crumpling and their use as Na-ion battery anodes | Materials Research Letters | 2018 | 115 |
47 | New Solid Solution MAX Phases: (Ti0.5, V0.5)3AlC2, (Nb0.5, V0.5)2AlC, (Nb0.5, V0.5)4AlC3and (Nb0.8, Zr0.2)2AlC | Materials Research Letters | 2014 | 111 |
48 | Effect of Microstructure on the Deformation Mechanism of Friction Stir-Processed Al0.1CoCrFeNi High Entropy Alloy | Materials Research Letters | 2015 | 104 |
49 | Strengthening strategy for a ductile metastable β-titanium alloy using low-temperature aging | Materials Research Letters | 2017 | 104 |
50 | Hierarchical features infused heterogeneous grain structure for extraordinary strength-ductility synergy | Materials Research Letters | 2018 | 103 |