# | Title | Journal | Year | Citations |
---|
1 | Microstructure and Mechanical Properties of Cu-Ni-Si Alloys | Zairyo/Journal of the Society of Materials Science, Japan | 2005 | 115 |
2 | (null) | Zairyo/Journal of the Society of Materials Science, Japan | 1976 | 103 |
3 | 細束X線応力測定の一方法とその疲労き裂伝ぱ問題への応用 | Zairyo/Journal of the Society of Materials Science, Japan | 1978 | 99 |
4 | Experimental Reconfirmation of Characteristic S-N Property for High Carbon Chromium Bearing Steel in Wide Life Region in Rotating Bending. | Zairyo/Journal of the Society of Materials Science, Japan | 2000 | 99 |
5 | Effects of hardness and crack geometry on .DELTA.Kth of small cracks. | Zairyo/Journal of the Society of Materials Science, Japan | 1986 | 67 |
6 | 疲労試験データの統計的整理 | Zairyo/Journal of the Society of Materials Science, Japan | 1980 | 58 |
7 | Fatigue. Analysis of the Mechanism of Superlong Fatigue Failure by Optical Microscope and SEM/AFM Observations. | Zairyo/Journal of the Society of Materials Science, Japan | 1999 | 54 |
8 | Viscoelastic Behavior of Polymer Blends and Its Comparison with Model Experiments | Zairyo/Journal of the Society of Materials Science, Japan | 1963 | 52 |
9 | Crack-Healing Behavior of Monolithic Alumina and Strength of Crack-Healed Member | Zairyo/Journal of the Society of Materials Science, Japan | 2003 | 51 |
10 | Fatigue Fracture of Low Alloy Steel at Ultra-High-Cycle Region under Elevated Temperature Condition. | Zairyo/Journal of the Society of Materials Science, Japan | 1997 | 45 |
11 | A strain-time equation applicable up to tertiary creep stage. | Zairyo/Journal of the Society of Materials Science, Japan | 1985 | 44 |
12 | Single Incidence X-Ray Stress Measurement for All Plane Stress Components Using Imaging Plate of Two-Dimensional X-Ray Detector. | Zairyo/Journal of the Society of Materials Science, Japan | 1995 | 42 |
13 | Mechanism of Long Life Fatigue Fracture Induced by Interior Inclusion for Bearing Steel in Rotating Bending | Zairyo/Journal of the Society of Materials Science, Japan | 2003 | 42 |
14 | クリープ変形初期のき裂先端近傍の応力・ひずみ場と修正J積分 | Zairyo/Journal of the Society of Materials Science, Japan | 1980 | 42 |
15 | X-Ray Study on Deformation and Fracture of Solid. Effects of Water Jet Peening on Corrosion Resistance and Fatigue Strength of Type 304 Stainless Steel. | Zairyo/Journal of the Society of Materials Science, Japan | 1996 | 42 |
16 | RECENT PROGRESS IN CONSTITUTIVE MODELING FOR RATCHETTING | Zairyo/Journal of the Society of Materials Science, Japan | 1997 | 38 |
17 | Effect of Forging Ratio and Grain Size on Tensile and Fatigue Strength of Pure Titanium Forgings | Zairyo/Journal of the Society of Materials Science, Japan | 2005 | 38 |
18 | High Pressure. High Pressure Sintering of B6O Powder and Properties of Sintered Compact. | Zairyo/Journal of the Society of Materials Science, Japan | 1998 | 37 |
19 | Effect of Micro Texture of Electroplated Copper Thin Films on Their Mechanical Properties | Zairyo/Journal of the Society of Materials Science, Japan | 2007 | 37 |
20 | Loading Rate Dependency of Uniaxial Compressive Strength of Rock Under Water-Saturated Condition. | Zairyo/Journal of the Society of Materials Science, Japan | 1992 | 36 |
21 | Concrete with Copper Slag Fine Aggregate. | Zairyo/Journal of the Society of Materials Science, Japan | 2000 | 36 |
22 | 種々の前負荷後の降伏曲面について その研究の発展過程と現状 (その1) | Zairyo/Journal of the Society of Materials Science, Japan | 1975 | 35 |
23 | EFFECTS OF FIBER LENGTH AND ORIENTATION DISTRIBUTIONS ON THE MECHANICAL PROPERTIES OF SHORT-FIBER-REINFORCED POLYMERS | Zairyo/Journal of the Society of Materials Science, Japan | 1999 | 35 |
24 | Temperature Effect on Bonding and Debonding Behavior between FRP Sheets and Concrete | Zairyo/Journal of the Society of Materials Science, Japan | 2005 | 35 |
25 | Effect of Hydrogen on High Cycle Fatigue Failure of High Strength Steel, SCM435 | Zairyo/Journal of the Society of Materials Science, Japan | 2005 | 35 |
26 | Effect of Grain Size on Plastic Strain Analysis by EBSD for Austenitic Stainless Steels with Tensile Strain at 650°C | Zairyo/Journal of the Society of Materials Science, Japan | 2012 | 33 |
27 | Fabrication and Properties of ZnO Thin Films Prepared by Fine Channel Mist Mehtod | Zairyo/Journal of the Society of Materials Science, Japan | 2006 | 32 |
28 | New Technology for Opening Various Reinforcing Fiber Tows. | Zairyo/Journal of the Society of Materials Science, Japan | 1998 | 30 |
29 | Material Testing and Surface Modification by Using Cavitating Jet. | Zairyo/Journal of the Society of Materials Science, Japan | 1998 | 30 |
30 | Measurement of Fracture Toughness for Brittle Materials under Mixed-Mode Impact Loading Using Center-Notched Disk Specimen. | Zairyo/Journal of the Society of Materials Science, Japan | 2000 | 30 |
31 | Crack propagation characteristics of sintered Si3N4 under static and cyclic loads. | Zairyo/Journal of the Society of Materials Science, Japan | 1987 | 30 |
32 | Fatigue. Subsurface Fatigue Crack Initiation Behavior and S-N Curve Characteristics in High Carbon-Chromium Bearing Steel. | Zairyo/Journal of the Society of Materials Science, Japan | 1999 | 30 |
33 | The effect of axial-torsional straining phase on elevated-temperature biaxial low-cycle fatigue life in SUS 304 stainless steel. | Zairyo/Journal of the Society of Materials Science, Japan | 1987 | 29 |
34 | Measurement of Mode II Threshold Stress Intensity Factor Range .DELTA.KIIth. | Zairyo/Journal of the Society of Materials Science, Japan | 2002 | 28 |
35 | j soc mater sci jpn | Zairyo/Journal of the Society of Materials Science, Japan | 1975 | 28 |
36 | High Temperature Strength. Microstructures and Creep Strength of Welded Joints for W Strengthened High Cr Ferritic Steel. | Zairyo/Journal of the Society of Materials Science, Japan | 2001 | 28 |
37 | 鉄鋼材料の疲労き裂伝ぱ下限界に及ぼす応力比の影響 | Zairyo/Journal of the Society of Materials Science, Japan | 1984 | 27 |
38 | Fracture toughness of single crystal silicon. | Zairyo/Journal of the Society of Materials Science, Japan | 1991 | 27 |
39 | Sintering of Al2O3-Cr2O3 Powder Prepared by Sol-Gel Process | Zairyo/Journal of the Society of Materials Science, Japan | 2007 | 27 |
40 | First-Principles Calculation of Hydrogen Effects on the Formation and Diffusion of Vacancies in Alpha Iron: Discussion of the Hydrogen-Enhanced Strain-Induced Vacancy Mechanism | Zairyo/Journal of the Society of Materials Science, Japan | 2014 | 27 |
41 | Influences of wave form and compressive loads on the crack propagation behavior of sintered Si3N4 under cyclic loads. | Zairyo/Journal of the Society of Materials Science, Japan | 1989 | 27 |
42 | Recycling of CFRP by Pyrolysis Method. | Zairyo/Journal of the Society of Materials Science, Japan | 1995 | 26 |
43 | Fatigue. Effect of Hydrogen Trapped by Inclusions on Ultra-Long Life Fatigue Failure of Bearing Steel. | Zairyo/Journal of the Society of Materials Science, Japan | 2001 | 26 |
44 | Stable Crack Extension of an Alumina Ceramic in Three Point Bending Test. | Zairyo/Journal of the Society of Materials Science, Japan | 1993 | 25 |
45 | Improvement of Creep Life Prediction of High Cr Ferritic Creep Resistant Steels by Region Partitioning Method of Stress vs. Time to Rupture Diagram. | Zairyo/Journal of the Society of Materials Science, Japan | 2003 | 25 |
46 | Evaluation of the Fatigue Properties of Ti-6Al-4V Alloy with Harmonic Structure in 4-Points Bending | Zairyo/Journal of the Society of Materials Science, Japan | 2015 | 25 |
47 | Fatigue Crack Propagation in Magnesium Alloy AZ31 Rolled Plate | Zairyo/Journal of the Society of Materials Science, Japan | 2003 | 25 |
48 | 4. グリーンコンポジットとその研究の新展開 | Zairyo/Journal of the Society of Materials Science, Japan | 2006 | 25 |
49 | Structural Materials. A Study on a Technology for Producing High Quality Recycled Coarse Aggregate. | Zairyo/Journal of the Society of Materials Science, Japan | 2001 | 24 |
50 | Evaluation of Residual Stress Distribution in Shot-Peened Steel by Synchrotron Radiation | Zairyo/Journal of the Society of Materials Science, Japan | 2003 | 24 |