# | Title | Journal | Year | Citations |
---|
1 | Effect of chemical admixtures on properties of high-calcium fly ash geopolymer | International Journal of Minerals, Metallurgy and Materials | 2011 | 173 |
2 | Development and progress on hydrogen metallurgy | International Journal of Minerals, Metallurgy and Materials | 2020 | 169 |
3 | Kinetics of the hydrogen absorption and desorption processes of hydrogen storage alloys: A review | International Journal of Minerals, Metallurgy and Materials | 2022 | 169 |
4 | Effect of grinding on chemical and physical properties of rice husk ash | International Journal of Minerals, Metallurgy and Materials | 2009 | 147 |
5 | Toward the development of Mg alloys with simultaneously improved strength and ductility by refining grain size via the deformation process | International Journal of Minerals, Metallurgy and Materials | 2021 | 126 |
6 | Big data management in the mining industry | International Journal of Minerals, Metallurgy and Materials | 2020 | 123 |
7 | Graphene-reinforced aluminum matrix composites prepared by spark plasma sintering | International Journal of Minerals, Metallurgy and Materials | 2016 | 106 |
8 | Factors affecting the shrinkage of fly ash geopolymers | International Journal of Minerals, Metallurgy and Materials | 2011 | 105 |
9 | Effects of basicity and MgO content on the viscosity of the SiO2-CaO-MgO-9wt%Al2O3 slag system | International Journal of Minerals, Metallurgy and Materials | 2014 | 105 |
10 | Extraction of vanadium from high calcium vanadium slag using direct roasting and soda leaching | International Journal of Minerals, Metallurgy and Materials | 2012 | 103 |
11 | Mechanism investigation on coal and gas outburst: An overview | International Journal of Minerals, Metallurgy and Materials | 2020 | 96 |
12 | Effect of silica fume on the fresh and hardened properties of fly ash-based self-compacting geopolymer concrete | International Journal of Minerals, Metallurgy and Materials | 2013 | 90 |
13 | Processing effects on the magnetic and mechanical properties of FeCoNiAl0.2Si0.2 high entropy alloy | International Journal of Minerals, Metallurgy and Materials | 2013 | 88 |
14 | Properties of high calcium fly ash geopolymer pastes with Portland cement as an additive | International Journal of Minerals, Metallurgy and Materials | 2013 | 85 |
15 | Kaolin-based geopolymers with various NaOH concentrations | International Journal of Minerals, Metallurgy and Materials | 2013 | 84 |
16 | Reduction kinetics of iron oxide pellets with H2 and CO mixtures | International Journal of Minerals, Metallurgy and Materials | 2015 | 82 |
17 | Production of pig iron from red mud waste fines using thermal plasma technology | International Journal of Minerals, Metallurgy and Materials | 2012 | 81 |
18 | Influence of grain refinement on the corrosion behavior of metallic materials: A review | International Journal of Minerals, Metallurgy and Materials | 2021 | 80 |
19 | Recovery of iron from high phosphorus oolitic iron ore using coal-based reduction followed by magnetic separation | International Journal of Minerals, Metallurgy and Materials | 2013 | 78 |
20 | Top slag refining for inclusion composition transform control in tire cord steel | International Journal of Minerals, Metallurgy and Materials | 2012 | 76 |
21 | Electrical conductivity and dielectric property of fly ash geopolymer pastes | International Journal of Minerals, Metallurgy and Materials | 2011 | 70 |
22 | Compressive fatigue behavior and failure evolution of additive fiber-reinforced cemented tailings composites | International Journal of Minerals, Metallurgy and Materials | 2022 | 70 |
23 | Development of high volume rice husk ash alumino silicate composites | International Journal of Minerals, Metallurgy and Materials | 2010 | 68 |
24 | Immobilization and leaching characteristics of fluoride from phosphogypsum-based cemented paste backfill | International Journal of Minerals, Metallurgy and Materials | 2021 | 68 |
25 | Efficient microwave absorption achieved through in situ construction of core-shell CoFe2O4@mesoporous carbon hollow spheres | International Journal of Minerals, Metallurgy and Materials | 2023 | 66 |
26 | Mechanics and safety issues in tailing-based backfill: A review | International Journal of Minerals, Metallurgy and Materials | 2020 | 65 |
27 | Effect of welding process on the microstructure and properties of dissimilar weld joints between low alloy steel and duplex stainless steel | International Journal of Minerals, Metallurgy and Materials | 2012 | 64 |
28 | Pitting corrosion and crevice corrosion behaviors of high nitrogen austenitic stainless steels | International Journal of Minerals, Metallurgy and Materials | 2009 | 63 |
29 | Microstructural and mechanical properties of Al-4.5wt% Cu reinforced with alumina nanoparticles by stir casting method | International Journal of Minerals, Metallurgy and Materials | 2013 | 63 |
30 | Microstructure and mechanical properties of Al/Cu/Mg laminated composite sheets produced by the ARB proces | International Journal of Minerals, Metallurgy and Materials | 2018 | 61 |
31 | Enhanced microwave absorption property of silver decorated biomass ordered porous carbon composite materials with frequency selective surface incorporation | International Journal of Minerals, Metallurgy and Materials | 2023 | 61 |
32 | Modification of MgO·Al2O3 spinel inclusions in Al-killed steel by Ca-treatment | International Journal of Minerals, Metallurgy and Materials | 2011 | 60 |
33 | Metalizing reduction and magnetic separation of vanadium titano-magnetite based on hot briquetting | International Journal of Minerals, Metallurgy and Materials | 2014 | 59 |
34 | Extraction and characterization of alumina nanopowders from aluminum dross by acid dissolution process | International Journal of Minerals, Metallurgy and Materials | 2015 | 59 |
35 | A model to determine hole spacing in the rock fracture process by non-explosive expansion material | International Journal of Minerals, Metallurgy and Materials | 2011 | 58 |
36 | Thermal conductivity model of filled polymer composites | International Journal of Minerals, Metallurgy and Materials | 2011 | 57 |
37 | Mechanical and microstructural characterization of Al7075/SiC nanocomposites fabricated by dynamic compaction | International Journal of Minerals, Metallurgy and Materials | 2014 | 57 |
38 | Roasting and leaching behaviors of vanadium and chromium in calcification roasting–acid leaching of high-chromium vanadium slag | International Journal of Minerals, Metallurgy and Materials | 2018 | 57 |
39 | Anisotropy in mechanical properties and corrosion resistance of 316L stainless steel fabricated by selective laser melting | International Journal of Minerals, Metallurgy and Materials | 2019 | 57 |
40 | Temperature variation characteristics in flocculation settlement of tailings and its mechanism | International Journal of Minerals, Metallurgy and Materials | 2020 | 57 |
41 | Iron ore tailings used for the preparation of cementitious material by compound thermal activation | International Journal of Minerals, Metallurgy and Materials | 2009 | 56 |
42 | Rheological behavior of paste in metal mines | International Journal of Minerals, Metallurgy and Materials | 2022 | 56 |
43 | Influence of fly ash fineness and shape on the porosity and permeability of blended cement pastes | International Journal of Minerals, Metallurgy and Materials | 2010 | 55 |
44 | Microstructures and impact toughness behavior of Al 5083 alloy processed by cryorolling and afterwards annealing | International Journal of Minerals, Metallurgy and Materials | 2013 | 55 |
45 | A method for recovery of iron, titanium, and vanadium from vanadium-bearing titanomagnetite | International Journal of Minerals, Metallurgy and Materials | 2018 | 55 |
46 | Mine tailings as a raw material in alkali activation: A review | International Journal of Minerals, Metallurgy and Materials | 2020 | 55 |
47 | Reduction, reuse and recycle of spent Li-ion batteries for automobiles: A review | International Journal of Minerals, Metallurgy and Materials | 2021 | 55 |
48 | Influences of 2.5wt% Mn addition on the microstructure and mechanical properties of Cu-Al-Ni shape memory alloys | International Journal of Minerals, Metallurgy and Materials | 2010 | 54 |
49 | Effects of heat treatment on the intermetallic compounds and mechanical properties of the stainless steel 321–aluminum 1230 explosive-welding interface | International Journal of Minerals, Metallurgy and Materials | 2017 | 54 |
50 | Microstructure and mechanical properties of friction-stir welded St52 steel joints | International Journal of Minerals, Metallurgy and Materials | 2018 | 54 |