8.1(top 1%)
Impact Factor
8.4(top 1%)
extended IF
125(top 2%)
H-Index
6.9K
authors
7.3K
papers
181.8K
citations
3.3K
citing journals
67.7K
citing authors

Most Cited Articles of Materials and Design

TitleYearCitations
A review of dynamic recrystallization phenomena in metallic materials2016762
Additive manufacturing of Ti6Al4V alloy: A review2019750
Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing2016725
Additive manufacturing of PLA structures using fused deposition modelling: Effect of process parameters on mechanical properties and their optimal selection2017592
Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: A critical review2018548
A review of 4D printing2017487
Influence of defects on mechanical properties of Ti–6Al–4V components produced by selective laser melting and electron beam melting2015449
Fused deposition modeling with polypropylene2015433
Large-scale 3D printing of ultra-high performance concrete – a new processing route for architects and builders2016426
Comparison of the microstructures and mechanical properties of Ti–6Al–4V fabricated by selective laser melting and electron beam melting2016371
Formation and control of martensite in Ti-6Al-4V alloy produced by selective laser melting2016370
Correlation between porosity and processing parameters in TiAl6V4 produced by selective laser melting2016369
Selective laser melting of stainless steel 316L with low porosity and high build rates2016353
Mechanical and thermal properties of ABS/montmorillonite nanocomposites for fused deposition modeling 3D printing2016340
Investigation of crystal growth mechanism during selective laser melting and mechanical property characterization of 316L stainless steel parts2016321
Free vibration and elastic buckling of functionally graded porous beams reinforced by graphene platelets2017313
Review on magnetic nanoparticles for magnetic nanofluid hyperthermia application2017306
SLM lattice structures: Properties, performance, applications and challenges2019299
Measurements of the mechanical response of unidirectional 3D-printed PLA2017294
On the limitations of Volumetric Energy Density as a design parameter for Selective Laser Melting2017290
Mechanical property characterization and simulation of fused deposition modeling Polycarbonate parts2015271
A critical review of powder-based additive manufacturing of ferrous alloys: Process parameters, microstructure and mechanical properties2018268
3D printing of wood fibre biocomposites: From mechanical to actuation functionality2016268
Functionally graded Inconel 718 processed by additive manufacturing: Crystallographic texture, anisotropy of microstructure and mechanical properties2017257
Investigation into spatter behavior during selective laser melting of AISI 316L stainless steel powder2015250