| # | Title | Journal | Year | Citations |
|---|
| 1 | Recent developments on graphene and graphene oxide based solid state gas sensors | Sensors and Actuators B: Chemical | 2012 | 631 |
| 2 | Bearing fault detection of induction motor using wavelet and Support Vector Machines (SVMs) | Applied Soft Computing Journal | 2011 | 398 |
| 3 | Bioprinting for vascular and vascularized tissue biofabrication | Acta Biomaterialia | 2017 | 327 |
| 4 | Synthesis of FeS and FeSe Nanoparticles from a Single Source Precursor: A Study of Their Photocatalytic Activity, Peroxidase-Like Behavior, and Electrochemical Sensing of H2O2 | ACS Applied Materials & Interfaces | 2012 | 259 |
| 5 | Placement of wind and solar based DGs in distribution system for power loss minimization and voltage stability improvement | International Journal of Electrical Power and Energy Systems | 2013 | 254 |
| 6 | A New Highly Selective, Ratiometric and Colorimetric Fluorescence Sensor for Cu2+ with a Remarkable Red Shift in Absorption and Emission Spectra Based on Internal Charge Transfer | Organic Letters | 2010 | 251 |
| 7 | ZnO–SnO2 based composite type gas sensor for selective hydrogen sensing | Sensors and Actuators B: Chemical | 2014 | 237 |
| 8 | 3D bioprinting for drug discovery and development in pharmaceutics | Acta Biomaterialia | 2017 | 229 |
| 9 | Passive control of wind turbine vibrations including blade/tower interaction and rotationally sampled turbulence | Wind Energy | 2008 | 211 |
| 10 | Diffusion bonding of commercially pure titanium to 304 stainless steel using copper interlayer | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2005 | 209 |
| 11 | The SunPy Project: Open Source Development and Status of the Version 1.0 Core Package | Astrophysical Journal | 2020 | 208 |
| 12 | Sub-zero treatments of AISI D2 steel: Part I. Microstructure and hardness | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2010 | 200 |
| 13 | Resonance-assisted hydrogen bonding induced nucleophilic addition to hamper ESIPT: ratiometric detection of cyanide in aqueous media | Chemical Communications | 2013 | 185 |
| 14 | Influence of martensite morphology on the work-hardening behavior of high strength ferrite–martensite dual-phase steel | Journal of Materials Science | 2009 | 184 |
| 15 | Rice disease identification using pattern recognition techniques | | 2008 | 182 |
| 16 | A coupled coincidence point result in partially ordered metric spaces for compatible mappings | Nonlinear Analysis: Theory, Methods & Applications | 2010 | 180 |
| 17 | Tectonic evolution of the Eastern Ghats Belt, India | Precambrian Research | 2013 | 176 |
| 18 | Study of the Properties of Microcrystalline Cellulose Particles from Different Renewable Resources by XRD, FTIR, Nanoindentation, TGA and SEM | Journal of Polymers and the Environment | 2010 | 174 |
| 19 | A red fluorescence ‘off–on’ molecular switch for selective detection of Al3+, Fe3+ and Cr3+: experimental and theoretical studies along with living cell imaging | Chemical Communications | 2013 | 170 |
| 20 | CuO nano-whiskers: Electrodeposition, Raman analysis, photoluminescence study and photocatalytic activity | Materials Letters | 2011 | 168 |
| 21 | Nanowires: properties, applications and synthesis via porous anodic aluminium oxide template | Bulletin of Materials Science | 2007 | 166 |
| 22 | γ-Fe2O3 nanoparticles: An easily recoverable effective photo-catalyst for the degradation of rose bengal and methylene blue dyes in the waste-water treatment plant | Materials Research Bulletin | 2014 | 166 |
| 23 | 3D bioprinting for reconstituting the cancer microenvironment | Npj Precision Oncology | 2020 | 163 |
| 24 | Rice diseases classification using feature selection and rule generation techniques | Computers and Electronics in Agriculture | 2013 | 160 |
| 25 | CuS nanoparticles as a mimic peroxidase for colorimetric estimation of human blood glucose level | Talanta | 2013 | 158 |
| 26 | Reliability analysis of structures by iterative improved response surface method | Structural Safety | 2016 | 151 |
| 27 | Selective “naked eye” detection of Al(iii) and PPi in aqueous media on a rhodamine–isatin hybrid moiety | RSC Advances | 2013 | 147 |
| 28 | Effect of Deep Cryogenic Treatment on the Carbide Precipitation and Tribological Behavior of D2 Steel | Materials and Manufacturing Processes | 2007 | 145 |
| 29 | India-Antarctica-Australia-Laurentia connection in the Paleoproterozoic-Mesoproterozoic revisited: Evidence from new zircon U-Pb and monazite chemical age data from the Eastern Ghats Belt, India | Bulletin of the Geological Society of America | 2011 | 142 |
| 30 | Stability analysis and optimal control of an SIR epidemic model with vaccination | BioSystems | 2011 | 140 |
| 31 | Fuzzy goal programming approach to multilevel programming problems | European Journal of Operational Research | 2007 | 132 |
| 32 | Interfacial microstructure and mechanical properties of diffusion-bonded titanium–stainless steel joints using a nickel interlayer | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2006 | 131 |
| 33 | Optimal harvesting of prey–predator system with interval biological parameters: A bioeconomic model | Mathematical Biosciences | 2013 | 130 |
| 34 | A closed-form optimal tuning criterion for TMD in damped structures | Structural Control and Health Monitoring | 2007 | 129 |
| 35 | Characterization of diffusion bonded joint between titanium and 304 stainless steel using a Ni interlayer | Materials Characterization | 2008 | 126 |
| 36 | Municipal solid waste management in Kolkata, India – A review | Waste Management | 2009 | 125 |
| 37 | A Frequency Selective Surface Based Reconfigurable Rasorber With Switchable Transmission/Reflection Band | IEEE Antennas and Wireless Propagation Letters | 2019 | 125 |
| 38 | Methane and carbon dioxide sorption on a set of coals from India | International Journal of Coal Geology | 2011 | 124 |
| 39 | Synthesis, characterization and photocatalytic activity of α-Fe2O3 nanoparticles | Polyhedron | 2012 | 122 |
| 40 | A highly selective triphenylamine-based indolylmethane derivatives as colorimetric and turn-off fluorimetric sensor toward Cu2+ detection by deprotonation of secondary amines | Sensors and Actuators B: Chemical | 2011 | 119 |
| 41 | A comparative study on ethanol oxidation behavior at Pt and PtRh electrodeposits | Journal of Electroanalytical Chemistry | 2006 | 118 |
| 42 | A new rhodamine based colorimetric ‘off–on’ fluorescence sensor selective for Pd2+ along with the first bound X-ray crystal structure | Chemical Communications | 2011 | 118 |
| 43 | Carbon nanoparticles in ‘biochar’ boost wheat (Triticum aestivum) plant growth | RSC Advances | 2014 | 117 |
| 44 | Dual channel selective fluorescence detection of Al(iii) and PPi in aqueous media with an ‘off–on–off’ switch which mimics molecular logic gates (INHIBIT and EXOR gates) | Dalton Transactions | 2013 | 112 |
| 45 | Reliability based optimum design of Tuned Mass Damper in seismic vibration control of structures with bounded uncertain parameters | Probabilistic Engineering Mechanics | 2011 | 111 |
| 46 | Photocatalysis by 3,6-Disubstituted-s-Tetrazine: Visible-Light Driven Metal-Free Green Synthesis of 2-Substituted Benzimidazole and Benzothiazole | Journal of Organic Chemistry | 2013 | 110 |
| 47 | Quantifying Search Bias | | 2017 | 109 |
| 48 | Correlation of microstructure with wear behaviour of deep cryogenically treated AISI D2 steel | Wear | 2009 | 108 |
| 49 | Tailoring the Magnetic and Optical Characteristics of Nanocrystalline BiFeO3 by Ce Doping | Journal of the American Ceramic Society | 2012 | 108 |
| 50 | Influence of temperature of sub-zero treatments on the wear behaviour of die steel | Wear | 2009 | 107 |
