Pressure/Temperature Sensing Bimodal Electronic Skin with Stimulus Discriminability and Linear Sensitivity | Advanced Materials | 2018 | 158 |
3D printing of shape-conformable thermoelectric materials using all-inorganic Bi2Te3-based inks | Nature Energy | 2018 | 157 |
Recent Advances in Morphology Optimization for Organic Photovoltaics | Advanced Materials | 2018 | 136 |
Sn-Based Nanocomposite for Li-Ion Battery Anode with High Energy Density, Rate Capability, and Reversibility | ACS Nano | 2018 | 78 |
Microstructure Controlled Porous Silicon Particles as a High Capacity Lithium Storage Material via Dual Step Pore Engineering | Advanced Functional Materials | 2018 | 74 |
High breakdown voltage quasi-two-dimensional β-Ga2O3 field-effect transistors with a boron nitride field plate | Applied Physics Letters | 2018 | 63 |
LiI-Doped Sulfide Solid Electrolyte: Enabling a High-Capacity Slurry-Cast Electrode by Low-Temperature Post-Sintering for Practical All-Solid-State Lithium Batteries | ACS Applied Materials & Interfaces | 2018 | 54 |
Biomimetic Chitin–Silk Hybrids: An Optically Transparent Structural Platform for Wearable Devices and Advanced Electronics | Advanced Functional Materials | 2018 | 53 |
Flexible Strain Sensors Fabricated by Meniscus-Guided Printing of Carbon Nanotube-Polymer Composites | ACS Applied Materials & Interfaces | 2018 | 44 |
Optimal Scheduling and Operation of the ESS for Prosumer Market Environment in Grid-Connected Industrial Complex | IEEE Transactions on Industry Applications | 2018 | 37 |
Enhancing Thermoelectric Performances of Bismuth Antimony Telluride via Synergistic Combination of Multiscale Structuring and Band Alignment by FeTe Incorporation | ACS Applied Materials & Interfaces | 2018 | 37 |
Synthesis and Electrochemical Characterization of a Glass-Ceramic Li7P2S8I Solid Electrolyte for All-Solid-State Li-Ion Batteries | Journal of the Electrochemical Society | 2018 | 32 |
Meniscus-on-Demand Parallel 3D Nanoprinting | ACS Nano | 2018 | 28 |
A micromechanics-based analytical solution for the effective thermal conductivity of composites with orthotropic matrices and interfacial thermal resistance | Scientific Reports | 2018 | 25 |
Comparison of mammography, digital breast tomosynthesis, automated breast ultrasound, magnetic resonance imaging in evaluation of residual tumor after neoadjuvant chemotherapy | European Journal of Radiology | 2018 | 24 |
Design, Analysis, and Experimental Validation of a Permanent Magnet Synchronous Motor for Articulated Robot Applications | IEEE Transactions on Magnetics | 2018 | 23 |
Optimal Operation Control for Multiple BESSs of a Large-Scale Customer Under Time-Based Pricing | IEEE Transactions on Power Systems | 2018 | 22 |
Controllability of the Contact Resistance of 2G HTS Coil With Metal Insulation | IEEE Transactions on Applied Superconductivity | 2018 | 19 |
Practical Coordination Between Day-Ahead and Real-Time Optimization for Economic and Stable Operation of Distribution Systems | IEEE Transactions on Power Systems | 2018 | 18 |
Improvement in Energy Conversion Efficiency by Modification of Photon Distribution within the Photoanode of Dye-Sensitized Solar Cells | ACS Omega | 2018 | 16 |
Carbon embedded SnSb composite tailored by carbothermal reduction process as high performance anode for sodium-ion batteries | Journal of Industrial and Engineering Chemistry | 2018 | 15 |
Thermoelectric Properties of Hot-Pressed Bi-Doped n-Type Polycrystalline SnSe | Nanoscale Research Letters | 2018 | 15 |
Role of silica nanoparticle in multi-component epoxy composites for electrical insulation with high thermal conductivity | Journal of the American Ceramic Society | 2018 | 14 |
Measuring water contents in animal organ tissues using terahertz spectroscopic imaging | Biomedical Optics Express | 2018 | 13 |
Large signal electrical property of CuO-doped of a Bi0.5Na0.5TiO3–SrTiO3 | Journal of Electroceramics | 2018 | 12 |