| # | Title | Journal | Year | Citations |
|---|
| 1 | MX2semiconductors (M=Mo, W;Thickness and strain effects on electronic structures of transition metal dichalcogenides: 2H-MX2semiconductors (M=Mo, W; | Physical Review B | 2012 | 1,126 |
| 2 | Twinning-induced plasticity (TWIP) steels | Acta Materialia | 2018 | 963 |
| 3 | Brittle intermetallic compound makes ultrastrong low-density steel with large ductility | Nature | 2015 | 529 |
| 4 | Austenite grain size and the martensite-start temperature | Scripta Materialia | 2009 | 448 |
| 5 | Iron oxide-based superparamagnetic polymeric nanomaterials: Design, preparation, and biomedical application | Progress in Polymer Science | 2011 | 387 |
| 6 | State-of-the-knowledge on TWIP steel | Materials Science and Technology | 2012 | 324 |
| 7 | Austenite stability of ultrafine-grained transformation-induced plasticity steel with Mn partitioning | Scripta Materialia | 2011 | 321 |
| 8 | Designing a magnesium alloy with high strength and high formability | Nature Communications | 2018 | 321 |
| 9 | Stability of (Ti, M)C (M = Nb, V, Mo and W) carbide in steels using first-principles calculations | Acta Materialia | 2012 | 301 |
| 10 | On the origin of dynamic strain aging in twinning-induced plasticity steels | Acta Materialia | 2011 | 292 |
| 11 | Stacking fault energy and plastic deformation of fully austenitic high manganese steels: Effect of Al addition | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2010 | 283 |
| 12 | Localized Deformation due to Portevin–LeChatelier Effect in 18Mn–0.6C TWIP Austenitic Steel | ISIJ International | 2007 | 279 |
| 13 | Cryogenic strength improvement by utilizing room-temperature deformation twinning in a partially recrystallized VCrMnFeCoNi high-entropy alloy | Nature Communications | 2017 | 278 |
| 14 | Advanced Issues in springback | International Journal of Plasticity | 2013 | 275 |
| 15 | Microstructure-mechanical properties relationships for quenching and partitioning (Q&P) processed steel | Acta Materialia | 2016 | 268 |
| 16 | Medium Mn transformation-induced plasticity steels: Recent progress and challenges | Scripta Materialia | 2017 | 257 |
| 17 | Analysis of Microstructure Evolution in Quenching and Partitioning Automotive Sheet Steel | Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science | 2011 | 227 |
| 18 | On the Selection of the Optimal Intercritical Annealing Temperature for Medium Mn TRIP Steel | Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science | 2013 | 196 |
| 19 | Effects of Mn and Al contents on cryogenic-temperature tensile and Charpy impact properties in four austenitic high-Mn steels | Acta Materialia | 2015 | 194 |
| 20 | Strain partitioning and mechanical stability of retained austenite | Scripta Materialia | 2010 | 180 |
| 21 | Localized Deformation in Multiphase, Ultra-Fine-Grained 6 Pct Mn Transformation-Induced Plasticity Steel | Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science | 2011 | 180 |
| 22 | A case study on fibrous porous SnO 2 anode for robust, high-capacity lithium-ion batteries | Nano Energy | 2014 | 179 |
| 23 | Effect of Al on the stacking fault energy of Fe–18Mn–0.6C twinning-induced plasticity | Scripta Materialia | 2011 | 175 |
| 24 | Micromechanical finite element analysis of strain partitioning in multiphase medium manganese TWIP+TRIP steel | Acta Materialia | 2016 | 165 |
| 25 | Everlasting Living and Breathing Gyroid 3D Network in Si@SiOx/C Nanoarchitecture for Lithium Ion Battery | ACS Nano | 2019 | 165 |
| 26 | State‐of‐the‐Knowledge on Coating Systems for Hot Stamped Parts | Steel Research International | 2012 | 158 |
| 27 | Effects of Al addition on deformation and fracture mechanisms in two high manganese TWIP steels | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2011 | 157 |
| 28 | Deformation behavior of ferrite–austenite duplex lightweight Fe–Mn–Al–C steel | Scripta Materialia | 2012 | 156 |
| 29 | Electrophoretic deposition of graphene oxide on mild carbon steel for anti-corrosion application | Surface and Coatings Technology | 2014 | 156 |
| 30 | Twinning in metastable high-entropy alloys | Nature Communications | 2018 | 155 |
| 31 | A dislocation density-based single crystal constitutive equation | International Journal of Plasticity | 2010 | 152 |
| 32 | Experimental and theoretical formability analysis using strain and stress based forming limit diagram for advanced high strength steels | Materials & Design | 2013 | 147 |
| 33 | Stacking fault energy and deformation mechanisms in Fe-xMn-0.6C-yAl TWIP steel | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2016 | 144 |
| 34 | Thermodynamic modeling and diffusion kinetic experiments of binary Mg–Gd and Mg–Y systems | Acta Materialia | 2014 | 142 |
| 35 | Novel ferrite–austenite duplex lightweight steel with 77% ductility by transformation induced plasticity and twinning induced plasticity mechanisms | Acta Materialia | 2014 | 140 |
| 36 | Novel ultra-high-strength (ferrite + austenite) duplex lightweight steels achieved by fine dislocation substructures (Taylor lattices), grain refinement, and partial recrystallization | Acta Materialia | 2015 | 135 |
| 37 | Material modeling of 6016-O and 6016-T4 aluminum alloy sheets and application to hole expansion forming simulation | International Journal of Plasticity | 2017 | 135 |
| 38 | Microstructure and tensile properties of high-strength high-ductility Ti-based amorphous matrix composites containing ductile dendrites | Acta Materialia | 2011 | 130 |
| 39 | Microstructure and tensile behavior of duplex low-density steel containing 5mass% aluminum | Scripta Materialia | 2013 | 128 |
| 40 | Effect of deformation on hydrogen trapping and effusion in TRIP-assisted steel | Acta Materialia | 2012 | 126 |
| 41 | Microscopic role of carbon on MgB2 wire for critical current density comparable to NbTi | NPG Asia Materials | 2012 | 120 |
| 42 | Medium-Alloy Manganese-Rich Transformation-Induced Plasticity Steels | Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science | 2013 | 120 |
| 43 | Heterogeneous Aspects of Additive Manufactured Metallic Parts: A Review | Metals and Materials International | 2021 | 119 |
| 44 | On the Tensile Behavior of High-Manganese Twinning-Induced Plasticity Steel | Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science | 2009 | 118 |
| 45 | Role of yttrium in activation of 〈 c + a 〉 slip in magnesium: An atomistic approach | Scripta Materialia | 2015 | 116 |
| 46 | Ultrahigh high-strain-rate superplasticity in a nanostructured high-entropy alloy | Nature Communications | 2020 | 116 |
| 47 | Kinetics of the partitioning of carbon and substitutional alloying elements during quenching and partitioning (Q&P) processing of medium Mn steel | Acta Materialia | 2016 | 115 |
| 48 | Novel medium-Mn (austenite + martensite) duplex hot-rolled steel achieving 1.6 GPa strength with 20 % ductility by Mn-segregation-induced TRIP mechanism | Acta Materialia | 2018 | 114 |
| 49 | A modified damage model for advanced high strength steel sheets | International Journal of Plasticity | 2011 | 111 |
| 50 | Tensile Behavior of Intercritically Annealed 10 pct Mn Multi-phase Steel | Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science | 2014 | 111 |
