Thermal Engineering

35.0K(top 1%)

papers

708.5K(top 1%)

citations

197(top 1%)

h-index

274(top 1%)

g-index

118.5K

all documents

6.9K

doc citations

Top Articles

#	Title	Journal	Year	Citations
1	Review on thermal energy storage with phase change: materials, heat transfer analysis and applications	Applied Thermal Engineering	2003	3,711
2	Thermoelectrics: a review of present and potential applications	Applied Thermal Engineering	2003	1,113
3	Phase change materials for smart textiles – An overview	Applied Thermal Engineering	2008	922
4	Thermal conductivity and latent heat thermal energy storage characteristics of paraffin/expanded graphite composite as phase change material	Applied Thermal Engineering	2007	780
5	Correlations for the prediction of boiling heat transfer in small-diameter channels	Applied Thermal Engineering	1997	724
6	Review on battery thermal management system for electric vehicles	Applied Thermal Engineering	2019	723
7	Loop heat pipes	Applied Thermal Engineering	2005	686
8	Fluid selection for a low-temperature solar organic Rankine cycle	Applied Thermal Engineering	2009	686
9	A review of thermoelectric cooling: Materials, modeling and applications	Applied Thermal Engineering	2014	668
10	Pre-combustion, post-combustion and oxy-combustion in thermal power plant for CO2 capture	Applied Thermal Engineering	2010	615
11	Fluid selection for the Organic Rankine Cycle (ORC) in biomass power and heat plants	Applied Thermal Engineering	2007	591
12	Thermo-economic optimization of waste heat recovery Organic Rankine Cycles	Applied Thermal Engineering	2011	557
13	Thermophysical and electrokinetic properties of nanofluids – A critical review	Applied Thermal Engineering	2008	553
14	Heat transfer enhancement using Al2O3–water nanofluid for an electronic liquid cooling system	Applied Thermal Engineering	2007	537
15	Thermal conductivity enhancement of phase change materials using a graphite matrix	Applied Thermal Engineering	2006	525
16	Comparison of different cooling methods for lithium ion battery cells	Applied Thermal Engineering	2016	525
17	A thermal model for photovoltaic panels under varying atmospheric conditions	Applied Thermal Engineering	2010	478
18	Performance and emissions characteristics of Jatropha oil (preheated and blends) in a direct injection compression ignition engine	Applied Thermal Engineering	2007	475
19	Biodiesel from cotton seed oil and its effect on engine performance and exhaust emissions	Applied Thermal Engineering	2009	469
20	Stagnation electrical MHD nanofluid mixed convection with slip boundary on a stretching sheet	Applied Thermal Engineering	2016	450
21	An examination of regenerative organic Rankine cycles using dry fluids	Applied Thermal Engineering	2008	446
22	Solar assisted air conditioning of buildings – an overview	Applied Thermal Engineering	2007	426
23	Testing and modeling a scroll expander integrated into an Organic Rankine Cycle	Applied Thermal Engineering	2009	423
24	Cooling performance of a microchannel heat sink with nanofluids	Applied Thermal Engineering	2006	408
25	Energetic and economic investigation of Organic Rankine Cycle applications	Applied Thermal Engineering	2009	395
26	Transient cooling of electronics using phase change material (PCM)-based heat sinks	Applied Thermal Engineering	2008	392
27	Review of state of the art technologies of selective catalytic reduction of NOx from diesel engine exhaust	Applied Thermal Engineering	2014	392
28	Numerical and experimental study on the solidification of PCM around a vertical axially finned isothermal cylinder	Applied Thermal Engineering	2001	387
29	Heat pipes in modern heat exchangers	Applied Thermal Engineering	2005	387
30	Numerical investigation of nanofluids forced convection in circular tubes	Applied Thermal Engineering	2009	386
31	The effect of alumina/water nanofluid particle size on thermal conductivity	Applied Thermal Engineering	2010	384
32	Review of organic Rankine cycles for internal combustion engine exhaust waste heat recovery	Applied Thermal Engineering	2013	378
33	CFD applications in various heat exchangers design: A review	Applied Thermal Engineering	2012	373
34	A review of free-piston engine history and applications	Applied Thermal Engineering	2007	372
35	Performance investigation of an automotive car radiator operated with nanofluid-based coolants (nanofluid as a coolant in a radiator)	Applied Thermal Engineering	2010	369
36	Modelling of a double-glass photovoltaic module using finite differences	Applied Thermal Engineering	2005	365
37	Internal and external fin heat transfer enhancement technique for latent heat thermal energy storage in triplex tube heat exchangers	Applied Thermal Engineering	2013	365
38	Photovoltaic thermal (PV/T) collectors: A review	Applied Thermal Engineering	2007	363
39	Flow boiling in microchannels: Fundamentals and applications	Applied Thermal Engineering	2017	363
40	Materials for thermal conduction	Applied Thermal Engineering	2001	356
41	Targeting and design methodology for reduction of fuel, power and CO2 on total sites	Applied Thermal Engineering	1997	353
42	A review of car waste heat recovery systems utilising thermoelectric generators and heat pipes	Applied Thermal Engineering	2016	353
43	An experimental investigation of forced convective cooling performance of a microchannel heat sink with Al2O3/water nanofluid	Applied Thermal Engineering	2010	348
44	Robust optimization based optimal chiller loading under cooling demand uncertainty	Applied Thermal Engineering	2019	346
45	Thermal performance of liquid cooling based thermal management system for cylindrical lithium-ion battery module with variable contact surface	Applied Thermal Engineering	2017	343
46	Closed loop pulsating heat pipes	Applied Thermal Engineering	2003	335
47	On the systematic design and selection of optimal working fluids for Organic Rankine Cycles	Applied Thermal Engineering	2010	335
48	Assessment of the forced air-cooling performance for cylindrical lithium-ion battery packs: A comparative analysis between aligned and staggered cell arrangements	Applied Thermal Engineering	2015	328
49	Energy and exergy analysis of a steam power plant in Jordan	Applied Thermal Engineering	2009	327
50	Experimental investigation of the effect of compression ratio and injection pressure in a direct injection diesel engine running on Jatropha methyl ester	Applied Thermal Engineering	2010	321
51	Experimental and numerical studies on melting phase change heat transfer in open-cell metallic foams filled with paraffin	Applied Thermal Engineering	2012	321
52	Development of small-scale and micro-scale biomass-fuelled CHP systems – A literature review	Applied Thermal Engineering	2009	320
53	Combined electrical MHD heat transfer thermal extrusion system using Maxwell fluid with radiative and viscous dissipation effects	Applied Thermal Engineering	2017	319
54	Thermal performance enhancement of shell and tube Latent Heat Storage Unit using longitudinal fins	Applied Thermal Engineering	2015	317
55	Stability of nanofluid: A review	Applied Thermal Engineering	2020	317
56	Application of phase change materials in thermal management of electronics	Applied Thermal Engineering	2007	313
57	A comparative study of the carbon dioxide transcritical power cycle compared with an organic rankine cycle with R123 as working fluid in waste heat recovery	Applied Thermal Engineering	2006	312
58	Paraffin and paraffin/aluminum foam composite phase change material heat storage experimental study based on thermal management of Li-ion battery	Applied Thermal Engineering	2015	312
59	Effects of different coolants and cooling strategies on the cooling performance of the power lithium ion battery system: A review	Applied Thermal Engineering	2018	312
60	Industrial waste heat: Estimation of the technically available resource in the EU per industrial sector, temperature level and country	Applied Thermal Engineering	2018	311
61	Review of modeling methods for HVAC systems	Applied Thermal Engineering	2014	307
62	Phase-change materials (PCM) for automotive applications: A review	Applied Thermal Engineering	2018	307
63	A recent review of waste heat recovery by Organic Rankine Cycle	Applied Thermal Engineering	2018	307
64	Heat recovery from Diesel engines: A thermodynamic comparison between Kalina and ORC cycles	Applied Thermal Engineering	2010	306
65	High-temperature thermal storage using a packed bed of rocks – Heat transfer analysis and experimental validation	Applied Thermal Engineering	2011	306
66	Cooling of mobile electronic devices using phase change materials	Applied Thermal Engineering	2004	302
67	Thermal management issues in a PEMFC stack – A brief review of current status	Applied Thermal Engineering	2009	302
68	The development technology and applications of supercritical CO2 power cycle in nuclear energy, solar energy and other energy industries	Applied Thermal Engineering	2017	301
69	A family of new working materials for solid sorption air conditioning systems	Applied Thermal Engineering	2002	297
70	Review on solid-solid phase change materials for thermal energy storage: Molecular structure and thermal properties	Applied Thermal Engineering	2017	296
71	A survey of wind convection coefficient correlations for building envelope energy systems’ modeling	Applied Thermal Engineering	2008	295
72	A review of high-temperature particle receivers for concentrating solar power	Applied Thermal Engineering	2016	293
73	Fuzzy-based heat and power hub models for cost-emission operation of an industrial consumer using compromise programming	Applied Thermal Engineering	2018	291
74	Experimental study on thermal conductivity of ethylene glycol containing hybrid nano-additives and development of a new correlation	Applied Thermal Engineering	2017	290
75	Experimental investigation of the silica gel–water adsorption isotherm characteristics	Applied Thermal Engineering	2001	289
76	A correlation of optimal heat rejection pressures in transcritical carbon dioxide cycles	Applied Thermal Engineering	2000	287
77	Exergy based fluid selection for a geothermal Organic Rankine Cycle for combined heat and power generation	Applied Thermal Engineering	2010	286
78	Experimental investigations on heat transfer in phase change materials (PCMs) embedded in porous materials	Applied Thermal Engineering	2011	286
79	Enhancing the solar still performance using nanofluids and glass cover cooling: Experimental study	Applied Thermal Engineering	2017	284
80	Thermal effects in packaging high power light emitting diode arrays	Applied Thermal Engineering	2009	282
81	Thermoelectric cooler application in electronic cooling	Applied Thermal Engineering	2004	280
82	Thermal design and simulation of mini-channel cold plate for water cooled large sized prismatic lithium-ion battery	Applied Thermal Engineering	2017	280
83	Advances of thermal conductivity models of nanoscale silica aerogel insulation material	Applied Thermal Engineering	2015	278
84	Domestic demand-side management (DSM): Role of heat pumps and thermal energy storage (TES) systems	Applied Thermal Engineering	2013	277
85	Numerical analyses on optimizing a heat pipe thermal management system for lithium-ion batteries during fast charging	Applied Thermal Engineering	2015	275
86	Thermal properties of beeswax/graphene phase change material as energy storage for building applications	Applied Thermal Engineering	2017	274
87	Orthogonal experimental design of liquid-cooling structure on the cooling effect of a liquid-cooled battery thermal management system	Applied Thermal Engineering	2018	273
88	Integrated thermal management techniques for high power electronic devices	Applied Thermal Engineering	2004	271
89	Effects of temperature and solid volume fraction on viscosity of SiO2-MWCNTs/SAE40 hybrid nanofluid as a coolant and lubricant in heat engines	Applied Thermal Engineering	2016	269
90	Experimental study on the variation of physical and mechanical properties of rock after high temperature treatment	Applied Thermal Engineering	2016	269
91	Improving the cooling performance of automobile radiator with Al2O3/water nanofluid	Applied Thermal Engineering	2011	268
92	Biomass gasification cogeneration – A review of state of the art technology and near future perspectives	Applied Thermal Engineering	2013	268
93	Expanders for micro-CHP systems with organic Rankine cycle	Applied Thermal Engineering	2011	267
94	Food transport refrigeration – Approaches to reduce energy consumption and environmental impacts of road transport	Applied Thermal Engineering	2009	266
95	A review about the engineering design of optimal heat transfer systems using topology optimization	Applied Thermal Engineering	2017	266
96	Bottoming micro-Rankine cycles for micro-gas turbines	Applied Thermal Engineering	2007	265
97	Challenging offers of material science for adsorption heat transformation: A review	Applied Thermal Engineering	2013	265
98	Numerical investigation of geometry parameters for design of high performance ejectors	Applied Thermal Engineering	2009	264
99	Water adsorption characteristics of novel materials for heat transformation applications	Applied Thermal Engineering	2010	264
100	Thermal properties and applications of microencapsulated PCM for thermal energy storage: A review	Applied Thermal Engineering	2019	263

Journals

Authors

Affiliations

Citing Bodies

Thermal Engineering

Top Articles