Skip to main content
SpringerLink
Log in

Energy consumption reduction technology in manufacturing — A selective review of policies, standards, and research

  • Published:
International Journal of Precision Engineering and Manufacturing Aims and scope Submit manuscript

Abstract

Research on the improvement of efficiency in the manufacturing industry is underdeveloped partly because of the ambiguous objectives of the technical development of efficiencies in terms of energy consumption reduction. Consequently, the technical development of high-efficiency techniques that consider the whole manufacturing system is rarely addressed in industrial research. For this reason, this report aims to find the patterns in, and the definitions of, the technologies that will lead to efficiency improvement in the entire manufacturing industry by thoroughly investigating the literature about energy consumption reduction strategies, energy policies, and the state-of-the-art for energy-saving methods that are being pursued currently in several major countries. Through this study, the necessity and importance of the foregoing three items have been identified, and a way of defining the productivities of an energy-saving manufacturing system distinct from those of conventional manufacturing systems was attempted. It is also shown that the development of energy-saving and energy-harvesting technologies for all industrial sectors has emerged as a herald of economic growth in the near future.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. The Department for Business, Enterprise and Regulatory Reform, “Manufacturing: New Challenges, New Opportunities,” 2008.

  2. Evans, L. B., “Saving Energy in Manufacturing with Smart Technology,” World Energy, Vol. 6, No. 2, pp. 112–118, 2003.

    Google Scholar 

  3. National Association of Manufacturers, “Efficiency and Innovation In U.S. Manufacturing Energy Use,” 2005.

  4. U. S. Energy Information Administration, “2002 Energy Consumption by Manufacturers -Data table,” 2002.

  5. Natural Resources Canada’s Office of Energy Efficiency, “Energy Use in the Canadian Manufacturing Sector,” Cat. No. M144-164/2007, 2008.

  6. Gutowski, T., Dahmus, J. and Thiriez, A., “Electrical Energy Requirements for Manufacturing Processes,” 13th CIRP International Conference on Life Cycle Engineering, pp. 623–628, 2006.

  7. Commission of the European Communities, “An Energy Policy for Europe,” COM 1, 2007.

  8. Commission of the European Communities, “A European Strategic Energy Technology Plan (SET-PLAN): Towards a low carbon future,” COM 723, 2007.

  9. The European Parliament and the Council, “Directive 2006/32/EC,” Official Journal of the European Union, 2006.

  10. The European Parliament and the Council, “Directive 2005/32/EC,” Official Journal of the European Union, 2005.

  11. EPTA Ltd., “Study for preparing the first Working Plan of the EcoDesign Directive,” Report No. ENTR/06/026, 2007.

  12. Itoh, S., “Japan’s Energy Strategy and Development of Energy Cooperation in the Asia-Pacific,” ERINA Report, Vol. 77, pp. 35–48, 2007.

    Google Scholar 

  13. Agency for Natural Resources and Energy, Ministry of Economy, Trade and Industry, “Energy Conservation Policy & Measures in Japan,” 2007.

  14. Minami, N., “Japan’s Energy Conservation Initiatives: Highlighting the Energy Conservation Policy,” IEEJ Transactions on Electrical and Electronic Engineering, Vol. 3, No. 1, pp. 5–9, 2007.

    Article  Google Scholar 

  15. Agency for Natural Resources and Energy, Ministry of Economy, Trade and Industry, “Energy in Japan 2006,” pp. 7–12, 2006.

  16. Agency for Natural Resources and Energy, Ministry of Economy, Trade and Industry, “New National Energy Strategy,” 2006.

  17. New Energy and Industrial Technology Development Organization, “Technology Strategy Map,” 2008.

  18. Bladh, I., “Energy Efficiency in Manufacturing,” European Commission, 2009.

  19. Draganescu, F., Gheorghe, M. and Doicin, C. V., “Models of Machine Tool Efficiency and Specific Consumed Energy,” Journal of Materials Processing Technology, Vol. 141, No. 1, pp. 9–15, 2003.

    Article  Google Scholar 

  20. Bolliger, M., Gallestey, E., Crosley, G. and Kiener, M., “Energy Optimization in Cement Manufacturing,” ABB Review, Vol. 2, pp. 53–57, 2007.

    Google Scholar 

  21. Sutherland, J. W., Adler, D. P., Haapala, K. R. and Kumar, V., “A comparison of manufacturing and remanufacturing energy intensities with application to diesel engine production,” CIRP Annals — Manufacturing Technology, Vol. 57, No. 1, pp. 5–8, 2008.

    Article  Google Scholar 

  22. Dietmair, A. and Verl, A., “Energy Consumption Forecasting and Optimisation for Tool Machines,” Modern Machinery Science Journal, pp. 62–67, 2009.

  23. Herrmann, C. and Thiede, S., “Process Chain Simulation to Foster Energy Efficiency in Manufacturing,” CIRP Journal of Manufacturing Science and Technology, Vol. 1, No. 4, pp. 221–229, 2009.

    Article  Google Scholar 

  24. Wolters, W. T. M., Lambert, A. J. D. and Claus, J., “Sequencing problems in designing energy efficient production systems,” International Journal of Production Economics, Vol. 41, No. 1–3, pp. 405–410, 1995.

    Article  Google Scholar 

  25. David, J. L., “The Smart Grid in 2010 — Market Segments, Applications and Industry Players,” GTM Research, pp. 10–45, 2009.

  26. Anastasopoulos, M. P., Voulkidis, A. C., Vasilakos, A. V. and Cottis, P. G., “A secure network management protocol for SmartGrid BPL networks: Design, implementation and experimental results,” Computer Communications, Vol. 31, No. 18, pp. 4333–4342, 2008.

    Article  Google Scholar 

  27. Coll-Mayor, D., Paget, M. and Lightner, E., “Future intelligent power grid: Analysis of the vision in the European Union and the United States,” Energy Policy, Vol. 35, No. 4, pp. 2453–2465, 2007.

    Article  Google Scholar 

  28. Chassin, D. P. and Kiesling, L., “Decentralized Coordination through Digital Technology, Dynamic Pricing, and Customer-Driven Control: The GridWise Testbed Demonstration Project,” The Electricity Journal, Vol. 21, No. 8, pp. 51–59, 2008.

    Article  Google Scholar 

  29. Battaglini, A., Lilliestam, J., Haas, A. and Patt, A., “Development of SuperSmart Grids for a more efficient utilisation of electricity from renewable sources,” Journal of Cleaner Production, Vol. 17, No. 10, pp. 911–918, 2009.

    Article  Google Scholar 

  30. Nair, N. K. C. and Zhang, L., “SmartGrid: Future networks for New Zealand power systems incorporating distributed generation,” Energy Policy, Vol. 37, No. 9, pp. 3418–3427, 2009.

    Article  Google Scholar 

  31. Kim, T. H., “Korea to Save Power Through Smart Grid,” The Korea Times, 2009.

  32. Chan, T., “Korea to create huge smart grid industry,” Greentelecomlive, 2009.

  33. Koizawa, K., “Smart Grid related R&D in NEDO,” New Energy and Industrial Technology Development Organization, 2009.

  34. Saha, A. K., Chowdhury, S., Chowdhury, S. P. and Crossley, P. A., “Microturbine Based Distributed Generator in Smart Grid Application,” IET Digest, Vol. 2008, No. 12380, pp. 11–14, 2008.

    Google Scholar 

  35. Agafiotis, C. and Tsoutsos, T., “Energy saving technologies in the European ceramic sector: a systematic review,” Applied Thermal Engineering, Vol. 21, No. 12, pp. 1231–1249, 2001.

    Article  Google Scholar 

  36. Worrell, E., Faaij, A. P. C., Phylipsen, G. J. M. and Blok, K., “An approach for analysing the potential for material efficiency improvement,” Resources, Conservation and Recycling, Vol. 13, No. 3, pp. 215–232, 1995.

    Article  Google Scholar 

  37. Hekkert, M. P., Joosten, L. A. J., Worrell, E. and Turkenburg, W. C., “Reduction of CO2 emissions by improved management of material and product use: the case of primary packaging,” Resources, Conservation and Recycling, Vol. 29, No. 1, pp. 33–64, 2000.

    Article  Google Scholar 

  38. Behrens, B. A., Suchmann, P. and Schott, A., “Warm forging: new forming sequence for the manufacturing of long flat pieces,” Production Engineering, Vol. 2, No. 3, pp. 261–268, 2008.

    Article  Google Scholar 

  39. European Commission, “EU energy research,” 2008.

  40. European Commission, “Energy Research in the 7th framework programme,” 2007.

  41. European Commission, “Work Programme 2010, Cooperation THEME 4-NMP,” 2009.

  42. AIAG FoF PPP, “Factories of the Future PPP — Draft Strategic Multi-annual Roadmap,” 2009.

  43. Zoz, H., Kaupp, G., Ren, H., Goepel, K. and Naimi-Jamal, M. R., “Recycling of EAF dust by semi-continuous high kinetic process,” Metall, Vol. 59, No. 5, pp. 293–296, 2005.

    Google Scholar 

  44. European Commission, “SME FP6 Project Catalogue-A Collection of Co-operative and Collective Research Projects,” p. 186, 2008.

  45. Nodeszeloss, http://www.ucm.es/info/nodeszel/main.htm

  46. RotoFlex, http://rotoflex-eu.org

  47. Intelligent Manufacturing System, http://www.ims.org

  48. IMS2020, http://www.ims2020.net

  49. IMS2020-Supporting Global Research for 2020 Manufacturing Vision, http://ims2020net.wik.is

  50. Energy Efficient Manufacturing, http://ims2020net.wik.is/Research_Topics_List/KAT_2

  51. D’Addona, D., Teti, R. and Carbone, R., “Quick Response Manufacturing Approach for Lead Time Reduction in PCB Fabrication,” IPROMS 2006, 2006.

  52. Papagiannis, G., Dagoumas, A., Lettas, N. and Dokopoulos, P., “Economic and environmental impacts from the implementation of an intelligent demand side management system at the European level,” Energy Policy, Vol. 36, No. 1, pp. 163–180, 2008.

    Article  Google Scholar 

  53. Unger, N., Schneider, F. and Salhofer, S., “A review of ecodesign and environmental assessment tools and their appropriateness for electrical and electronic equipment,” Progress in Industrial Ecology — An International Journal, Vol. 5, No. 1–2, pp. 13–29, 2008.

    Google Scholar 

  54. Campatelli, G., “Analysis of the environmental impact for a turning operation of AISI 1040 steel,” IPROMS 2009, 2009.

  55. Zhu, Z. and Mekid, S., “Energy harvesting for wireless sensor nodes: investigation of architectures and sources of energy,” International Journal of Computer Aided Engineering and Technology, Vol. 1, No. 2, pp. 239–249, 2009.

    Article  Google Scholar 

  56. Kimura, F., “An approach to configuring environmentally conscious manufacturing systems,” J. of JSPE, Vol. 71, No. 8, pp. 941–945, 2005.

    Google Scholar 

  57. Ohashi, T. and Kawaguchi, T., “Environment-conscious plant and process for vehicle manufacturing,” J. of JSPE, Vol. 71, No. 8, pp. 946–948, 2005.

    Google Scholar 

  58. Abe, H., “Environmental conscious production system of RICOH group,” J. of JSPE, Vol. 71, No. 8, pp. 949–953, 2005.

    Google Scholar 

  59. Sekiguchi, T., “Trend and next development of cutting tool for eco-machining,” J. of JSPE, Vol. 75, No. 1, pp. 123–125, 2009.

    Google Scholar 

  60. Motonishi, S., “Progress of PVD coated tools,” J. of JSPE, Vol. 75, No. 1, pp. 70–71, 2009.

    Google Scholar 

  61. Matsubara, T., “Present state and problems of eco-machining technology,” J. of JSPE, Vol. 68, No. 7, pp. 885–889, 2002.

    Google Scholar 

  62. Yokota, H., “Current MQL machining and its next development,” J. of JSPE, Vol. 68, No. 7, pp. 903–906, 2002.

    Google Scholar 

  63. Nakamura, T., “On film on water fog metalworking fluid,” J. of JSPE, Vol. 68, No. 7, pp. 899–902, 2002.

    Google Scholar 

  64. Ukai, H., “Dry cutting technology by nitrogen gas,” J. of JSPE, Vol. 68, No. 7, pp. 890–894, 2002.

    Google Scholar 

  65. Mukai, R., “Trend to reducing technology of environment load in grinding machine,” J. of JSPE, Vol. 68, No. 7, pp. 911–914, 2002.

    Google Scholar 

  66. Tadashi, M., “Development and trend of machine tools for MQL,” Tool Engineer, Vol. 47, No. 4, pp. 44–49, 2003.

    Google Scholar 

  67. Koji, O., “Environment-conscious technology in machine tool maker,” Tool Engineer, Vol. 52, No. 8, pp. 15–19, 2008.

    Google Scholar 

  68. Tadashi, M., “Environment-conscious machine tools and its use in automotive parts machining,” Tool Engineer, Vol. 52, No. 8, pp. 20–25, 2008.

    Google Scholar 

  69. Hayashida, K., “Technical trend of steering system and grinding machine,” J. of JSPE, Vol. 75, No. 1, pp. 136–137, 2009.

    Google Scholar 

  70. Kubo, A., “Machine elements,” J. of JSPE, Vol. 75, No. 1, pp. 85–86, 2009.

    Google Scholar 

  71. Nakamura, S. and Miyaguchi, K., “Technical development of precision bearing and ball screw,” J. of JSPE, Vol. 75, No. 1, pp. 121–122, 2009.

    Google Scholar 

  72. Kobayashi, T., “Progress of NTN’s bearing technology in the past quarter century and its future perspective,” J. of JSPE, Vol. 75, No. 1, pp. 130–131, 2009.

    Google Scholar 

  73. Kurita, T. and Hattori, M., “Development of new concept desk top size machine tool,” Int. J. of Machine Tools & Manufacture, Vol. 45, No. 7–8, pp. 959–965, 2005.

    Article  Google Scholar 

  74. Yoshiaki, K., “Present and future of TMC multifunctional machine,” Tool Engineer, Vol. 47, No. 11, pp. 18–22, 2003.

    Google Scholar 

  75. Tsuneo, K., Toshihiro, Y., Akkinori, K. and Hideki, T., “TOPEMS optimal operation system for energy saving in manufacturing plants,” Toshiba review, Vol. 62, No. 8, pp. 45–48, 2007.

    Google Scholar 

  76. Caterpillar Japan, “Global warming prevention by factory integrity,” The Energy Conservation Center in Japan, Case Studies of Excellent Energy Saving, pp. 1–8, 2008.

  77. Masao, D., “Energy saving in heavy machine manufacturing shop,” Tool Engineer, Vol. 52, No. 8, pp. 10–14, 2008.

    Google Scholar 

  78. Keisuke, K., “A new point of time energy saving by low pressurization,” Tool Engineer, Vol. 52, No. 8, pp. 26–28, 2008.

    Google Scholar 

  79. Aoki, I., “Precision fine blanking,” J. of JSPE, Vol. 75, No. 1, pp. 56–57, 2009.

    Google Scholar 

  80. Worrell, E. and Galitsky, C., “Energy efficiency improvement and cost saving opportunities for cement making; An energy star® guide for energy and plant managers,” Lawrence Berkeley National Laboratory, LBNL-54036-Revision, 2008.

  81. Jahanmir, S., Ives, L. K., Ruff, A. W. and Peterson, M. B., “Ceramic Machining: Assessment of Current Practice and Research Needs in the United States 1992,” NIST Special Publication, Vol. 834, Shipping list no.: 92-2331-M, 1992.

  82. Bentzen, J., “Estimating the rebound effect in US manufacturing energy consumption,” Energy Economics, Vol. 26, No. 1, pp. 123–134, 2004.

    Article  Google Scholar 

  83. Djassemi, M., “A parametric programming technique for efficient CNC machining operations,” Computers & Industrial Engineering, Vol. 35, No. 1–2, pp. 33–36, 1998.

    Article  Google Scholar 

  84. Schmitz, T., Davies, M., Dutterer, B. and Ziegert, J., “The application of high-speed CNC machining to prototype production,” International Journal of Machine Tools and Manufacture, Vol. 41, No. 8, pp. 1209–1228, 2001.

    Article  Google Scholar 

  85. Rakwal, D. and Bamberg, E., “Slicing, cleaning and kerf analysis of germanium wafers machined by wire electrical discharge machining,” Journal of Materials Processing Technology, Vol. 209, No. 8, pp. 3740–3751, 2009.

    Article  Google Scholar 

  86. Miller, S. F., Shih, A. J. and Qu, J., “Investigation of the spark cycle on material removal rate in wire electrical discharge machining of advanced materials,” International Journal of Machine Tools & Manufacture, Vol. 44, No. 4, pp. 391–400, 2004.

    Article  Google Scholar 

  87. Fox-Rabinovich, G. S., Yamomoto, K., Veldhuis, S. C., Kovalev, A. I. and Dosbaeva, G. K., “Tribological adaptability of TiAlCrN PVD coatings under high performance dry machining conditions,” Surface & Coatings Technology, Vol. 200, No. 5–6, pp. 1804–1813, 2005.

    Article  Google Scholar 

  88. Kovacevic, R., Cherukuthota, C. and Mazurkiewicz, M., “High pressure waterjet cooling/lubrication to improve machining efficiency in milling,” International Journal of Machine Tools & Manufacture, Vol. 35, No. 10, pp. 1459–1473, 1995.

    Article  Google Scholar 

  89. Calatoru, V. D., Balazinski, M., Mayer, J. R. R., Paris, H. and L’Espérance, G., “Diffusion wear mechanism during high-speed machining of 7475-T7351 aluminium alloy with carbide end mills,” Wear, Vol. 265, No. 11–12, pp. 1793–1800, 2008.

    Article  Google Scholar 

  90. Anderson, M., Patwa, R. and Shin, Y. C., “Laser-assisted machining of Inconel 718 with an economic analysis,” International Journal of Machine Tools & Manufacture, Vol. 46, No. 14, pp. 1879–1891, 2006.

    Article  Google Scholar 

  91. Draganescu, F., Gheorghe, M. and Doicin, C. V., “Models of machine tool efficiency and specific consumed energy,” Journal of Materials Processing Technology, Vol. 141, No. 1, pp. 9–15, 2003.

    Article  Google Scholar 

  92. Evans, L. B., “Saving Energy in Manufacturing with Smart Technology,” World Energy, Vol. 6, No. 2, pp. 112–118, 2003.

    Google Scholar 

  93. Marksberry, P. W., “Micro-flood (MF) technology for sustainable manufacturing operations that are coolant less and occupationally friendly,” Journal of Cleaner Production, Vol. 15, No. 10, pp. 958–971, 2007.

    Article  Google Scholar 

  94. Weinert, K., Inasaki, I., Sutherland, J. W. and Wakabayashi, T., “Dry Machining and Minimum Quantity Lubrication,” CIRP Annals — Manufacturing Technology, Vol. 53, No. 2, pp. 511–537, 2004.

    Article  Google Scholar 

  95. Dasch, J. M., Ang, C. C., Wong, C. A., Waldo, R. A., Chester, D., Cheng, Y. T., Powell, B. R., Weiner, A. M. and Konca, E., “The effect of free-machining elements on dry machining of B319 aluminum alloy,” Journal of Materials Processing Technology, Vol. 209, No. 10, pp. 4638–4644, 2009.

    Article  Google Scholar 

  96. Williams, J. and Shu, L. H., “Analysis of Remanufacturer Waste Streams Across Product Sectors,” CIRP Annals — Manufacturing Technology, Vol. 50, No. 1, pp. 101–104, 2001.

    Article  Google Scholar 

  97. Adler, D. P., Kumar, V., Ludewig, P. A. and Sutherland, J. W., “Comparing Energy and Other Measures of Environmental Performance in the Original Manufacturing and Remanufacturing of Engine Components,” Proc. of the 2007 ASME International Manufacturing Science and Engineering Conference, pp. 1–10, 2007.

  98. Amezquita, T., Hammond, R. and Bras, R., “Characterizing the Remanufacturability of Engineering Systems,” Proc. of 1995 ASME Adv. in Des. Automation Conference, pp. 271–278, 1995.

  99. Lund, R. T. and Hauser, W., “The Remanufacturing Industry: Anatomy of a Giant,” Department of Manufacturing Engineering, Boston University, 2003.

  100. Bollinger, L., Frenkel, R., Grand, R., Kutta, R., Lund, R. and Stanovsky, C., “Remanufacturing Survey Findings,” Center for Policy Alternatives, MIT, 1981.

  101. Larsen, H. and Petersen, L. S., “Future options for energy technology,” Riso Energy Report 6, Riso National Lab. Technical University of Denmark, 2007.

  102. The NEED Project, “Intermediate Energy Infobook,” 2009.

  103. Kan, Y., Shida, R., Takahashi, J. and Uzawa, K., “Energy saving effect of light weight electric vehicle using CFRP on transportation sector,” 10th Japan International SAMPE Symposium & Exhibition, 2009.

  104. New Energy and Industrial Technology Development Organization, “Japanese Technologies for energy savings/GHG Emissions Reduction,” 2008.

  105. Rob, G. R., “Future transportation with smart grids & sustainable energy,” Journal of Systemics, Cybernetics and Informatics, Vol. 7, No. 5, pp. 4–8, 2009.

    Google Scholar 

  106. Andrews, C. J. and Krogmann, U., “Technology diffusion and energy intensity in US commercial buildings,” Energy Policy, Vol. 27, No. 2, pp. 541–553, 2009.

    Article  Google Scholar 

  107. Sanches, M. C., Brown, R. E., Webber, C. and Homan G. K., “Savings estimates for the United States Environmental Protection Agency’s Energy Star voluntary product labeling program,” Energy Policy, Vol. 36, No. 6, pp. 2098–2108, 2008.

    Article  Google Scholar 

  108. Barrett, M., Lowe, R., Oreszczyn, T. and Steadman P., “How to support growth with less energy,” Energy Policy, Vol. 36, No. 12, pp. 4592–4599, 2008.

    Article  Google Scholar 

  109. Jung, J.-W., Ko, S.-H., Jeong, Y.-H., Min, B.-K. and Lee, S. J., “Real-time Gap Control for Micro-EDM: Application in a Microfactory,” IJPEM, Vol. 9, No. 1, pp. 3–6, 2008.

    Google Scholar 

  110. Okazaki, Y., Mishima, N. and Ashida, K., “Microfactory — Concept, history, and developments,” Journal of Manufacturing Science and Engineering, Vol. 126, No. 4, pp. 837–844, 2004.

    Article  Google Scholar 

  111. Mishima, N., Kondo, S. and Masui, K., “A Study on Efficiency Analysis of Micro Manufacturing Systems,” Proc. of the 2007 IEEE, International Conference on Mechatronics and Automation, pp. 51–56, 2007.

  112. Kurita, T. and Hattori, M., “Development of new-concept desk top size machine tool,” International Journal of Machine Tools & Manufacture, Vol. 45, No. 7–8, pp. 959–965, 2005.

    Article  Google Scholar 

  113. Nakano, S., Ashida, K., Park, J. and Akedo, J., “On demand manufacturing system ∼a solution of ecological MEMS factory,” 6th International Workshop on Microfactories, 2008.

  114. Landymore, K. “Electrical Energy Reduction in Refrigeration and Air Conditioning,” Smartcool Systems Inc., 2006.

  115. Energy Information Administration, “International Energy Outlook 2009,” U.S. Department of Energy, 2009.

  116. International Energy Agency, “Tracking Industrial Energy Efficiency and CO2 Emissions,” 2007.

  117. International Energy Agency, “CO2 Emissions from Fuel Combustion (2003 Edition),” 2004.

  118. Energy Information Administration, “International Energy Outlook 2006,” U.S. Department of Energy, 2006.

  119. Energy Information Administration, “International Energy Outlook 2007,” U.S. Department of Energy, 2007.

  120. Energy Information Administration, “International Energy Outlook 2008,” U.S. Department of Energy, 2008.

  121. Narita, H. and Fujimoto, H., “Analysis of Environmental Impact due to Machine Tool Operation,” Int. J. of Automation Technology, Vol. 3, No.1, pp. 49–55, 2009.

    Google Scholar 

  122. IPCC 3rd Assessment Report — Climate Change 2001, “Chapter 6 — Radiative Forcing of Climate Change,” Intergovernmental Panel on Climate Change, 2001.

  123. Korea Energy Economics Institute, “Trends in the greenhouse gas emissions,” 2006.

  124. Energy Information Administration, “Emissions of Greenhouse Gases in the United States 2007,” U.S. Department of Energy, 2008.

  125. Stachowiak, G. W. and Batchelor, A. W., “Engineering tribology: 3rd ed.,” Butterworth-Heinemann, pp. 709–710, 2005.

  126. Korea Energy Economics Institute, “2008 Energy Consumption Survey,” Korea Ministry of Knowledge Economy, 2009.

  127. Energy Information Administration, “2006 Consumption of Energy for All Purposes (First Use) By Manufacturing Industry & Region,” U.S. Department of Energy, 2009.

  128. Industrial Consumption of Energy Survey, “Summary Report of Energy Use in the Canadian Manufacturing Sector 1995–2005,” Canada Office of Energy Efficiency, 2008.

  129. Canada Office of Energy Efficiency, “Energy Use Data Handbook Tables (Industrial sector),” Natural resources Canada, 2009.

  130. Energy Information Administration, “International Energy Annual 2006,” U.S. Department of Energy, 2008.

  131. Energy Conservation Center in Japan, “Japan Energy Conservation Handbook 2005/2006,” 2006.

  132. MacLeay, I., Harris, K. and Michaels, C., “Digest of United Kingdom Energy Statistics 2007,” Department for Business Enterprise and Regulatory Reform, 2007.

  133. Norway Statistics, “Industrial energy use, temporary data, 2008 — Powerful increase in energy costs,” 2009.

  134. Welch, D., “Manufacturing Energy Use Survey: Year ended March 2006,” Statistics New Zealand, 2007.

  135. Dang, H., Tamayo, J. and Wilkinson, D., “New Zealand Energy in Brief,” New Zealand Ministry of Economic Development, 2007.

  136. Energy Information Administration, “Annual Energy Outlook 2008 With Projections to 2030,” U.S. Department of Energy, 2008.

  137. Briefing Note and referenced information, “BNXS01: Carbon Dioxide Emission Factors for UK Energy Use,” 2009.

  138. PointCarbon, http://www.pointcarbon.com.

  139. Hoekstra, R. and van der Bergh, H., “Comparing structural and index decomposition analysis,” Energy Economics, Vol. 25, No. 1, pp. 39–64, 2003.

    Article  Google Scholar 

  140. Ang, B. W. and Liu, N., “Energy decomposition analysis: IEA model versus other methods,” Energy Policy, Vol. 35, No. 3, pp. 1426–1432, 2007.

    Article  Google Scholar 

  141. Ang, B. W. and Liu, N., “Handling zero values in the logarithmic mean Divisia index decomposition approach,” Energy Policy, Vol. 35, No. 1, pp. 238–246, 2007.

    Article  Google Scholar 

  142. Ang, B. W. and Zhang, F. Q., “A survey of index decomposition analysis in energy and environmental studies,” Energy, Vol. 25, No. 12, pp. 1149–1176, 2000.

    Article  Google Scholar 

  143. Liu, F. L. and Ang, B. W., “Eight methods for decomposing the aggregate energy intensity of industry,” Applied Energy, Vol. 76, No. 1–3, pp. 15–23, 2003.

    Article  Google Scholar 

  144. Boyd, G. A. and Roop, J. M., “A note on the Fisher ideal index decomposition for structural change in energy intensity,” The Energy Journal, Vol. 25, No. 1, pp. 87–101, 2004.

    Google Scholar 

  145. Ang, B. W., Liu, F. L. and Chung, H. S., “A generalized Fisher index approach to energy decomposition analysis,” Energy Economics, Vol. 26, No. 5, pp. 757–763, 2004.

    Article  Google Scholar 

  146. Boer, P., “Generalized Fisher index or Siegel-Shapley decomposition?,” Energy Economics, Vol. 31, No. 5, pp. 810–814, 2009.

    Article  MathSciNet  Google Scholar 

  147. Lenzen, M., “Decomposition analysis and the mean-rate-ofchange index,” Applied Energy, Vol. 83, No. 3, pp. 185–198, 2006.

    Article  Google Scholar 

  148. Chung, H. S. and Lee, H. C., “A residual-free decomposition of the sources of carbon-dioxide emissions: a case of the Korean industries,” Energy, Vol. 26, No. 1, pp. 15–30, 2001.

    Article  Google Scholar 

  149. Lescaroux, F., “Decomposition of US manufacturing energy intensity and elasticities of components with respect to energy prices,” Energy Economics, Vol. 30, No. 3, pp. 1068–1080, 2008.

    Article  Google Scholar 

  150. Unander, F., “Decomposition of manufacturing energy-use in IEA countries, How do recent developments compare with historical long-term trends?,” Applied Energy, Vol. 84, No. 7–8, pp. 771–780, 2007.

    Article  Google Scholar 

  151. Weber, C. L., “Measuring structural change and energy use: Decomposition of the US economy from 1997 to 2002,” Energy Policy, Vol. 37, No. 4, pp. 1561–1570, 2009.

    Article  Google Scholar 

  152. Sun, J., “Changes in energy consumption and energy intensity: a complete decomposition model,” Energy Economics, Vol. 20, No. 1, pp. 85–100, 1998.

    Article  Google Scholar 

  153. Diakoulaki, D. and Mandaraka, M., “Decomposition analysis for assessing the progress in decoupling industrial growth from CO2 emissions in the EU manufacturing sector,” Energy Economics, Vol. 29, No. 4, pp. 636–664, 2007.

    Article  Google Scholar 

  154. Papagiannaki, K. and Diakoulaki, D., “Decomposition analysis of CO2 emissions from passenger cars: The cases of Greece and Denmark,” Energy Policy, Vol. 37, No. 8, pp. 3259–3267, 2009.

    Article  Google Scholar 

  155. Greening, L. A., Ting, M. and Davis, W. B., “Decomposition of aggregate carbon intensity for freight: trends from 10 OECD countries for the period 1971–1993,” Energy Economics, Vol. 21, No. 4, pp. 331–361, 1999.

    Article  Google Scholar 

  156. Schipper, L., Scholl, L. and Price, L., “Energy use and carbon emissions from freight in 10 industrialised countries: an analysis of trends from 1973 to 1992,” Transportation Research Part D: Transport and Environment, Vol. 2, No. 1, pp. 57–76, 1997.

    Article  Google Scholar 

  157. Scholl, L., Schipper, L. and Kiang, N., “CO2 emissions from passenger transport: a comparison of international trends from 1973 to 1992,” Energy Policy, Vol. 24, No. 1, pp. 17–30, 1996.

    Article  Google Scholar 

  158. Schipper, L., Steiner, R., Duerr, P., An, F. and Strøm, S., “Energy use in passenger transport in OECD countries: changes since 1970,” Transportation, Vol. 19, No. 1, pp. 25–42, 1992.

    Article  Google Scholar 

  159. Kwon, T.-H., “Decomposition of factors determining the trend of CO2 emissions from car travel in Great Britain (1970–2000),” Ecological Economics, Vol. 53, No. 2, pp. 261–275, 2005.

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Dept. of Mechanical Engineering, Korea Polytechnic University, 2121, Jeongwang-dong, Siheung, South Korea, 429-793

    Cheol-Woo Park & Jong-Hang Lee

  2. Dept. of Mechanical Engineering, Soonchunhyang University, 646, Eupnae-ri, Shinchang-myeon, Asan, South Korea, 336-745

    Kye-Si Kwon

  3. School of Mechanical Design Engineering, Korea Polytechnic University, 2121, Jeongwang-dong, Siheung, South Korea, 429-793

    Wook-Bae Kim

  4. School of Mechanical Engineering, Yonsei University, 134, Shinchon-dong, Seodaemun-gu, Seoul, South Korea, 120-749

    Byung-Kwon Min & Kyung-Soo Lee

  5. Dept. of Mechanical Engineering, Chungju National University, 72, Daehang-no, Chungju, South Korea, 380-702

    Sung-Jun Park

  6. Dept. of Mechanical Engineering, Hannam University, 133, Ojeong-dong, Daedeok-gu, Daejeon, South Korea, 306-791

    In-Ha Sung

  7. Dept. of Mechanical Engineering, Konyang University, 26, Naedong, Nonsan, South Korea, 320-711

    Young Sik Yoon

  8. School of Mechanical Engineering, Chung-Ang University, 221, Heukseok-dong, Dongjak-gu, Seoul, South Korea, 156-756

    Jongwon Seok

Authors
  1. Cheol-Woo Park
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Kye-Si Kwon
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Wook-Bae Kim
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Byung-Kwon Min
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Sung-Jun Park
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. In-Ha Sung
    View author publications

    You can also search for this author in PubMed Google Scholar

  7. Young Sik Yoon
    View author publications

    You can also search for this author in PubMed Google Scholar

  8. Kyung-Soo Lee
    View author publications

    You can also search for this author in PubMed Google Scholar

  9. Jong-Hang Lee
    View author publications

    You can also search for this author in PubMed Google Scholar

  10. Jongwon Seok
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Jongwon Seok.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Park, CW., Kwon, KS., Kim, WB. et al. Energy consumption reduction technology in manufacturing — A selective review of policies, standards, and research. Int. J. Precis. Eng. Manuf. 10, 151–173 (2009). https://doi.org/10.1007/s12541-009-0107-z

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s12541-009-0107-z

Keywords

Search

Navigation