Abstract
This paper presents the effects of boronizing on ferrous alloys such as plain-carbon steel AISI 1018, high-strength alloy steel AISI 4340, and austenitic stainless steel AISI 304. The coatings were produced by thermochemical treatment with powder mixtures at temperatures of 850°C for 4 h. The microstructure of obtained coatings was investigated, the microhardness was measured, and the corrosion resistance and oxidation resistance were tested. By metallographic analyses, the thickness of the coatings was measured. Microhardness of the boron coatings was measured using loads of 10 gf, 25 gf, and 50 gf. Corrosion tests were performed in 5% HCl, 10% HCl, and 15% HCl at room temperature. To determine the oxidation resistance of the coatings, the isothermal method was used to observe the weight change at a temperature of 600°C for 12 h. Results indicated that the presence of boronized coatings on ferrous alloys greatly improved their microhardness, oxidation resistance, and corrosion resistance.
Similar content being viewed by others
References
R.C. Fischer, Met. Progr. (1986).
K.H. Habig, Tribol. Int. 22, 65 (1989).
Z. Zakhariev, M. Marinov, R. Zlateva, and K. Khristov, Surf. Coating Technol. 31, 265 (1987).
A. Erdemir and C. Bindal. Surf. Coating Technol. 76–77, 443 (1995).
Y. Pengxun. Thin Solid Films 214, 44 (1992).
R. Hu, G.R. Fenske, L.E. Rehn, P.M. Baldo, A. Erdemir, R.H. Lee, and R.A. Erck. Surf. Coating Technol. 42, 282 (1990).
H.J. Hunger and G. Trute. Heat Treatment Met. 21, 31 (1994).
T. Wierzchon, Advances in Low-Temperature Plasma Chemistry, Technology, and Applications (Lancaster, Basel: Technomic Publishing Co. Inc., 1988), vol. 2.
B. Venkataraman and G. Sundararajan, Surf. Coating Technol. 73, 177 (1995).
A. Graf Von Matuschka, Borieren (Munchen, Wien: Carl Hanser-Verlag, 1977).
C.H. Xu, J.K. Xi, and W. Gao. J. Mater. Processing Technol. 65, 94 (1997).
A. Pertek, Gas Boriding Condition for the Iron Borides Layers Formation, vol. 163–165, Materials Science Forum (Aedermannsdorf: Switzerland: Trans Tech Publications, 1994), pp. 323–328
T. Wierzchon and P. Belinski, Mater. Manufacturing Processing 10, 121 (1995).
H.J. Hunger, G. Trute, G. Lobig, D. Rathjen, Harterei technische Mittelungen 52 (1997)
Z. Zakhariev, R. Zlateva, and K. Petrov, J. Less-Common Met. 117, 1986, pp. 129–33
A.K. Sinha ASM Handbook (Materials Park, OH: ASM International, 1991), vol. 4, p. 437.
W. Liliental and J. Tacikowski, Härterei-Technische Mitteilungen 35, 251 (1980).
P.X. Yan and Y.C. Su, Mater. Chem. Phys. 39, 304 (1995).
T. Wierzchoń, P. Bielińki, and K. Sikorski: Surf. Coating Technol. 73, 121 (1995).
K. Sikorski, T. Wierzchoń, and P. Bielinski, J. Mater. Sci. 33, 811 (1998).
M.R. Toroghinezhad, M. Salehi, and F. Ashrafizadeh, Mater. Manufacturing Processing 12, 1 (1997).
A. Pertek and M. Kulka, Appl. Surf. Sci. 202, 252 (2002).
Z. Zakhariev and R. Zlateva, J. Alloys Compounds 196, 59 (1993)
R.S. Zlateva and Z.T. Zakhariev, Bulg. Chem. Comm. 26, 82 (1993)
K.H. Habig and R. Chatterjee Fisher: Tribol. Int. 14, 209 (1981).
W.J.G. Fichtl, Heat Treated Met. 79 (1983).
H.J. Hunger and G. Trute, Heat Treated Met. 2, 31 (1994).
G. Wahl, Durferrit-Technical Information, reprint from VDI-Z117, 1975, pp. 785–789.
V.D. Whittle, Scott. Met. Technol. 11, 522 (1995).
A.A. Zorin, O.V. Kasparova, N.I. Khokhlov, and L. Ya Karpov, Physical Chemistry Scientific-Research Institute, translated from Zashchita Metallov 24, 390 (1989).
G. Sundararajan, B. Venkataraman, K. Lakshminarayana, and G.B.K. Harish, “Studies on Boronizing of En 24 Steel,” ARCI Technical Report, Hyderabad, India, 1998.
R. Chatterjee-Fisher in Surface Modification Technologies, ed. T.S. Sundarshan (New York: Marcel Dekker Inc, 1989), p. 567.
J.G. Buijnsters, P. Shankar, P. gopalakrishnan, W.J.P. van Enckevort, J.J. Schermer, and S.S. Ramakrishnan: J. Thin Solid Films, 426, 85 (2003).
C.F.M. Borges, M. Moisan, and F. Roy, U.S. patent 5,759,623 (2 June 1998).
J.G. Buijnsters, P. Shankar, W. Fleischer, W.J.P. van Enckevort, J.J. Schermer, and J.J. ter Meulen, Diamond Relat. Mater. 11, 536 (2002).
P.S. Weiser, S. Prawer, A. Hoffman, R.R. Manory, P.J.K. Paterson, and S.A. Stuart, J. Appl. Phys. 72, 4643 (1992).
R.B. Waterhouse, Fretting Corrosion (London: Pergamon Press, 1975), pp. 186–189.
R. Oltra, in Wear-Corrosion Interactions in Liquid Media, eds. A.A. Sagues and E.I. Meletis (Warrendale, PA: TMS, 1991), pp. 3–18.
E. Atik, U. Yunker, and C. Meriç, Tribol. Int. 36, 155 (2003).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Petrova, R.S., Suwattananont, N. Surface modification of ferrous alloys with boron. J. Electron. Mater. 34, 575–582 (2005). https://doi.org/10.1007/s11664-005-0068-7
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/s11664-005-0068-7