| 1 | Minimal information for studies of extracellular vesicles 2018 (MISEV2018): a position statement of the International Society for Extracellular Vesicles and update of the MISEV2014 guidelines | Journal of Extracellular Vesicles | 2018 | 8,548 |
| 2 | Effects of special drill bits on drilling-induced delamination of composite materials | International Journal of Machine Tools and Manufacture | 2006 | 314 |
| 3 | The path towards delamination-free drilling of composite materials | Journal of Materials Processing Technology | 2005 | 308 |
| 4 | Experiments and simulations on low-temperature waste heat harvesting system by thermoelectric power generators | Applied Energy | 2011 | 287 |
| 5 | Comprehensive analysis of delamination in drilling of composite materials with various drill bits | Journal of Materials Processing Technology | 2003 | 278 |
| 6 | Taguchi analysis of delamination associated with various drill bits in drilling of composite material | International Journal of Machine Tools and Manufacture | 2004 | 256 |
| 7 | Recent advancements for improving the performance of triboelectric nanogenerator devices | Nano Energy | 2022 | 245 |
| 8 | Measurement of Interstitial Convective Heat Transfer and Frictional Drag for Flow Across Metal Foams | Journal of Heat Transfer | 2002 | 234 |
| 9 | Thermally conductive and electrically insulating epoxy nanocomposites with thermally reduced graphene oxide–silica hybrid nanosheets | Nanoscale | 2013 | 218 |
| 10 | Mechanical behavior of phenolic-based composites reinforced with multi-walled carbon nanotubes | Carbon | 2006 | 212 |
| 11 | Rapid heterogeneous liver-cell on-chip patterning via the enhanced field-induced dielectrophoresis trap | Lab on A Chip | 2006 | 208 |
| 12 | Beyond the Debye length in high ionic strength solution: direct protein detection with field-effect transistors (FETs) in human serum | Scientific Reports | 2017 | 203 |
| 13 | A self-powered multifunctional dressing for active infection prevention and accelerated wound healing | Science Advances | 2023 | 191 |
| 14 | Electromagnetic interference shielding efficiency of polyaniline composites filled with graphene decorated with metallic nanoparticles | Composites Science and Technology | 2013 | 181 |
| 15 | Evaluation of thrust force and surface roughness in drilling composite material using Taguchi analysis and neural network | Journal of Materials Processing Technology | 2008 | 180 |
| 16 | Magnetoresistive Sensor Development Roadmap (Non-Recording Applications) | IEEE Transactions on Magnetics | 2019 | 180 |
| 17 | Liver-cell patterning Lab Chip: mimicking the morphology of liver lobule tissue | Lab on A Chip | 2013 | 175 |
| 18 | An immersed boundary technique for simulating complex flows with rigid boundary | Computers and Fluids | 2007 | 174 |
| 19 | Microbial fuel cell performance of multiwall carbon nanotubes on carbon cloth as electrodes | Journal of Power Sources | 2009 | 174 |
| 20 | Computerized tomography and C-Scan for measuring delamination in the drilling of composite materials using various drills | International Journal of Machine Tools and Manufacture | 2005 | 171 |
| 21 | Smart manufacturing powered by recent technological advancements: A review | Journal of Manufacturing Systems | 2022 | 171 |
| 22 | High-purity and label-free isolation of circulating tumor cells (CTCs) in a microfluidic platform by using optically-induced-dielectrophoretic (ODEP) force | Lab on A Chip | 2013 | 170 |
| 23 | A stability approach to fuzzy control design for nonlinear systems | Fuzzy Sets and Systems | 1992 | 165 |
| 24 | Hydrometallurgical Recovery of Metals from Large Printed Circuit Board Pieces | Scientific Reports | 2015 | 164 |
| 25 | Simulating flows with moving rigid boundary using immersed-boundary method | Computers and Fluids | 2010 | 159 |
| 26 | Micro-sized microbial fuel cell: A mini-review | Bioresource Technology | 2011 | 150 |
| 27 | Defeating Antibiotic-Resistant Bacteria: Exploring Alternative Therapies for a Post-Antibiotic Era | International Journal of Molecular Sciences | 2020 | 150 |
| 28 | Drilling carbon fiber-reinforced composite material at high speed | Wear | 1996 | 146 |
| 29 | High sensitivity cardiac troponin I detection in physiological environment using AlGaN/GaN High Electron Mobility Transistor (HEMT) Biosensors | Biosensors and Bioelectronics | 2018 | 145 |
| 30 | A magnetic bead-based assay for the rapid detection of methicillin-resistant Staphylococcus aureus by using a microfluidic system with integrated loop-mediated isothermal amplification | Lab on A Chip | 2011 | 143 |
| 31 | Effect of ridge shapes on turbulent heat transfer and friction in a rectangular channel | International Journal of Heat and Mass Transfer | 1993 | 140 |
| 32 | Piezoelectric MEMS Resonators: A Review | IEEE Sensors Journal | 2021 | 140 |
| 33 | Comparison of cell behavior on pva/pva-gelatin electrospun nanofibers with random and aligned configuration | Scientific Reports | 2016 | 139 |
| 34 | The effect of chisel length and associated pilot hole on delamination when drilling composite materials | International Journal of Machine Tools and Manufacture | 2003 | 138 |
| 35 | Simulation and measurement of enhanced turbulent heat transfer in a channel with periodic ribs on one principal wall | International Journal of Heat and Mass Transfer | 1993 | 133 |
| 36 | Effect of tool wear on delamination in drilling composite materials | International Journal of Mechanical Sciences | 2007 | 133 |
| 37 | A review of recent advances in indirect evaporative cooling technology | International Communications in Heat and Mass Transfer | 2021 | 128 |
| 38 | Effects of exit back-up on delamination in drilling composite materials using a saw drill and a core drill | International Journal of Machine Tools and Manufacture | 2005 | 124 |
| 39 | Toward characterizing extracellular vesicles at a single-particle level | Journal of Biomedical Science | 2019 | 124 |
| 40 | Predictions on surface finish in electrical discharge machining based upon neural network models | International Journal of Machine Tools and Manufacture | 2001 | 122 |
| 41 | On the thermal expansion coefficients of thin films | Sensors and Actuators A: Physical | 2000 | 119 |
| 42 | An effective Seebeck coefficient obtained by experimental results of a thermoelectric generator module | Applied Energy | 2011 | 119 |
| 43 | Turbulent Heat Transfer Augmentation and Friction in Periodic Fully Developed Channel Flows | Journal of Heat Transfer | 1992 | 117 |
| 44 | Optimization of electrochemical polishing of stainless steel by grey relational analysis | Journal of Materials Processing Technology | 2003 | 117 |
| 45 | Mixed convection of a heated rotating cylinder in a square enclosure | International Journal of Heat and Mass Transfer | 2014 | 116 |
| 46 | Accuracy enhancement of five-axis CNC machines through real-time error compensation | International Journal of Machine Tools and Manufacture | 2003 | 114 |
| 47 | Nucleic acid amplification using microfluidic systems | Lab on A Chip | 2013 | 114 |
| 48 | Vibration measurement by the time-averaged electronic speckle pattern interferometry methods | Applied Optics | 1996 | 111 |
| 49 | On drilling characteristics of fiber-reinforced thermoset and thermoplastics | International Journal of Machine Tools and Manufacture | 1992 | 109 |
| 50 | Geometric effects on fluid mixing in passive grooved micromixers | Lab on A Chip | 2005 | 104 |
