Truss optimization with dynamic constraints using a particle swarm algorithm | Expert Systems With Applications | 2011 | 195 |
A framework for assessing the use of lean production practices in manufacturing cells | International Journal of Production Research | 2011 | 105 |
Rapid and high yields of synthesis of butyl acetate catalyzed by Novozym 435: Reaction optimization by response surface methodology | Process Biochemistry | 2011 | 95 |
Variables Governing Strength of Compacted Soil–Fly Ash–Lime Mixtures | Journal of Materials in Civil Engineering | 2011 | 80 |
Water content, porosity and cement content as parameters controlling strength of artificially cemented silty soil | Engineering Geology | 2011 | 78 |
Reliability based optimization of laminated composite structures using genetic algorithms and Artificial Neural Networks | Structural Safety | 2011 | 68 |
Variables Controlling Stiffness and Strength of Lime-Stabilized Soils | Journal of Geotechnical and Geoenvironmental Engineering - ASCE | 2011 | 65 |
Virtual Reference Feedback Tuning for non-minimum phase plants | Automatica | 2011 | 62 |
Conversion of sugars present in rice hull hydrolysates into ethanol by Spathaspora arborariae, Saccharomyces cerevisiae, and their co-fermentations | Bioresource Technology | 2011 | 58 |
Split tensile strength of monofilament polypropylene fiber-reinforced cemented sandy soils | Geosynthetics International | 2011 | 57 |
Studies on the Dosage of Fiber-Reinforced Cemented Soils | Journal of Materials in Civil Engineering | 2011 | 53 |
Variables Controlling Strength of Artificially Cemented Sand: Influence of Curing Time | Journal of Materials in Civil Engineering | 2011 | 48 |
Comparison of different pretreatment methods for hydrogen production using environmental microbial consortia on residual glycerol from biodiesel | International Journal of Hydrogen Energy | 2011 | 48 |
Catalytic Decomposition of Methane Over M–Co–Al Catalysts (M = Mg, Ni, Zn, Cu) | Catalysis Letters | 2011 | 42 |
Porosity-Cement Ratio Controlling Strength of Artificially Cemented Clays | Journal of Materials in Civil Engineering | 2011 | 41 |
Numerical simulation of viscoelastic two-phase flows using openFOAM® | Chemical Engineering Science | 2011 | 41 |
Innovation concept for measurement gross error detection and identification in power system state estimation | IET Generation, Transmission and Distribution | 2011 | 40 |
Stabilisation of neutral systems with saturating control inputs | International Journal of Systems Science | 2011 | 35 |
Validation of a Brazilian quantitative sensory testing (QST) device for the diagnosis of small fiber neuropathies | Arquivos De Neuro-Psiquiatria | 2011 | 35 |
Voids/Cement Ratio Controlling Tensile Strength of Cement-Treated Soils | Journal of Geotechnical and Geoenvironmental Engineering - ASCE | 2011 | 34 |
Multi-objective optimization as a new approach to illumination design of interior spaces | Building and Environment | 2011 | 29 |
The influence of Chromium supplied by tanning and wet finishing processes on the formation of cr(vi) in leather | Brazilian Journal of Chemical Engineering | 2011 | 25 |
An innovative nuclear reactor for electricity and desalination | International Journal of Energy Research | 2011 | 21 |
Real-time high-resolution X-ray imaging and nuclear magnetic resonance study of the hydration of pure and Na-doped C3A in the presence of sulfates | Inorganic Chemistry | 2011 | 21 |
Control design for LPV systems with input saturation and state constraints: An application to a semi-active suspension | | 2011 | 21 |