Nickel filament polymer-matrix composites with low surface impedance and high electromagnetic interference shielding effectiveness | Journal of Electronic Materials | 1997 | 186 |
Effects of silica fume, latex, methylcellulose, and carbon fibers on the thermal conductivity and specific heat of cement paste | Cement and Concrete Research | 1997 | 92 |
Sensing delamination in a carbon fiber polymer-matrix composite during fatigue by electrical resistance measurement | Polymer Composites | 1997 | 87 |
Effect of corrosion on the bond between concrete and steel rebar | Cement and Concrete Research | 1997 | 85 |
Titanium diboride copper-matrix composites | Journal of Materials Science | 1997 | 75 |
Real-time monitoring of fatigue damage and dynamic strain in carbon fiber polymer-matrix composite by electrical resistance measurement | Smart Materials and Structures | 1997 | 72 |
A comparative study of the coated filler method and the admixture method of powder metallurgy for making metal–matrix composites | Journal of Materials Science | 1997 | 37 |
Improving the strength of brazed joints to alumina by adding carbon fibres | Journal of Materials Science | 1997 | 36 |
Self-monitoring of strain and damage by a carbon-carbon composite | Carbon | 1997 | 31 |
An electromechanical study of the transverse behavior of carbon fiber polymer-matrix composite | Composite Interfaces | 1997 | 20 |
Residual stress in carbon fiber embedded in epoxy, studied by simultaneous measurement of applied stress and electrical resistance | Composite Interfaces | 1997 | 18 |
0.4 μm Diameter Nickel-Filament Silicone-Matrix Resilient Composites for Electromagnetic Interference Shielding | Journal of Electronic Packaging, Transactions of the ASME | 1997 | 16 |
A new electromechanical effect in discontinuous-filament elastomer-matrix composites | Smart Materials and Structures | 1997 | 15 |
Improving brick-to-mortar bond strength by the addition of carbon fibers to the mortar | Cement and Concrete Research | 1997 | 13 |
Improving the bond strength between steel rebar and concrete by increasing the watercement ratio | Cement and Concrete Research | 1997 | 10 |
Self-monitoring of strain in silicon carbide whisker reinforced silicon nitride | Smart Materials and Structures | 1997 | 7 |
Evaluation of the interfacial shear in a discontinuous carbon fiber/mortar matrix composite | Cement and Concrete Research | 1997 | 7 |
Z-Axis Anisotropic Electrically Conducting Polymer-Matrix Composite Film | Journal of Electronic Packaging, Transactions of the ASME | 1997 | 2 |
Fiber Breakage In Polymer-Matrix Composites During Static And Fatigue Loading, Observed By Electrical Resistance Measurement | Materials Research Society Symposia Proceedings | 1997 | 2 |
Sandwiching of superconductor by carbon fibre metal matrix composite for improving the mechanical properties, air stability and thermal cycling resistance | Composites Part A: Applied Science and Manufacturing | 1997 | 1 |
Characterizing the Dispersion of Constituents in Concrete by Electrical Resistivity | Materials Research Society Symposia Proceedings | 1997 | |
Early Fatigue Damage In Carbon Fiber Composites Observed By Electrical Resistance Measurement | Materials Research Society Symposia Proceedings | 1997 | |