| 1 | Network science on belief system dynamics under logic constraints | Science | 2016 | 312 |
| 2 | 3D printing of optimized composites with variable fiber volume fraction and stiffness using continuous fiber | Composites Science and Technology | 2020 | 180 |
| 3 | A constitutive model for 3D printed continuous fiber reinforced composite structures with variable fiber content | Composites Part B: Engineering | 2020 | 135 |
| 4 | Hidden attractors and multistability in a modified Chua’s circuit | Communications in Nonlinear Science and Numerical Simulation | 2021 | 120 |
| 5 | Optimization design and 3D printing of curvilinear fiber reinforced variable stiffness composites | Composites Science and Technology | 2021 | 109 |
| 6 | Analytical investigation of the fluid flow in the interface region between a porous medium and a clear fluid in channels partially filled with a porous medium | Flow, Turbulence and Combustion | 1996 | 107 |
| 7 | Grain boundary migration as rotational deformation mode in nanocrystalline materials | Applied Physics Letters | 2005 | 101 |
| 8 | Multiscale concurrent design and 3D printing of continuous fiber reinforced thermoplastic composites with optimized fiber trajectory and topological structure | Composite Structures | 2022 | 99 |
| 9 | Calculation of the energy J-integral for bodies with notches and cracks | International Journal of Fracture | 2004 | 93 |
| 10 | A new method for the synthesis of epitaxial layers of silicon carbide on silicon owing to formation of dilatation dipoles | Journal of Applied Physics | 2013 | 92 |
| 11 | Effect of fibrous TiO2 filler on the structural, mechanical, barrier and optical characteristics of biodegradable maize starch/PVA composite films | International Journal of Biological Macromolecules | 2019 | 89 |
| 12 | 3D Printing of Continuous Fiber Reinforced Polymer Composites: Development, Application, and Prospective | Chinese Journal of Mechanical Engineering: Additive Manufacturing Frontiers | 2022 | 75 |
| 13 | Synchronization and phase relations in the motion of two-pendulum system | International Journal of Non-Linear Mechanics | 2007 | 74 |
| 14 | Two-parameter fracture criterion (K ρ,c -T ef,c ) based on notch fracture mechanics | International Journal of Fracture | 2010 | 73 |
| 15 | A micro-polar theory for binary media with application to phase-transitional flow of fiber suspensions | Continuum Mechanics and Thermodynamics | 2003 | 70 |
| 16 | Generating grid chaotic sea from system without equilibrium point | Communications in Nonlinear Science and Numerical Simulation | 2022 | 70 |
| 17 | Drug Delivery From Polymer-Based Nanopharmaceuticals—An Experimental Study Complemented by Simulations of Selected Diffusion Processes | Frontiers in Bioengineering and Biotechnology | 2019 | 68 |
| 18 | Stress-assist chemical reactions front propagation in deformable solids | International Journal of Engineering Science | 2014 | 58 |
| 19 | A 2D granular medium with rotating particles | International Journal of Solids and Structures | 2006 | 55 |
| 20 | Multi-scale dynamic fracture model for quasi-brittle materials | International Journal of Engineering Science | 2012 | 54 |
| 21 | Design and 3D printing of continuous fiber reinforced heterogeneous composites | Composite Structures | 2020 | 54 |
| 22 | An investigation of a wave of temperature difference between solid and fluid phases in a porous packed bed | International Journal of Heat and Mass Transfer | 1994 | 53 |
| 23 | Maximum Average Tangential Stress Criterion for Prediction of the Crack Path | International Journal of Fracture | 2012 | 53 |
| 24 | Reactive Pulsed Laser Deposition of Clustered-Type MoSx (x ~ 2, 3, and 4) Films and Their Solid Lubricant Properties at Low Temperature | Nanomaterials | 2020 | 53 |
| 25 | The effective T-stress estimation and crack paths emanating from U-notches | Engineering Fracture Mechanics | 2010 | 52 |
| 26 | In‐plane and out‐of‐plane constraint parameters along a three‐dimensional crack‐front stress field under creep loading | Fatigue and Fracture of Engineering Materials and Structures | 2013 | 52 |
| 27 | Analytical comparison and criteria for heat and mass transfer models in metal hydride packed beds | International Journal of Heat and Mass Transfer | 1995 | 49 |
| 28 | Corrosion defect assessment on pipes using limit analysis and notch fracture mechanics | Engineering Failure Analysis | 2011 | 48 |
| 29 | Control of the coupled double pendulums system | Mechatronics | 2005 | 43 |
| 30 | Robust synchronization of linear dynamical networks with compensation of disturbances | International Journal of Robust and Nonlinear Control | 2014 | 43 |
| 31 | The master failure curve of pipe steels and crack paths in connection with hydrogen embrittlement | International Journal of Hydrogen Energy | 2015 | 42 |
| 32 | Two-parameter J-A concept in connection with crack-tip constraint | Theoretical and Applied Fracture Mechanics | 2017 | 42 |
| 33 | The effect of crack-tip constraint in some problems of fracture mechanics | Engineering Failure Analysis | 2020 | 41 |
| 34 | Combining the crack compliance method and speckle interferometry data for determination of stress intensity factors and T-stresses | Engineering Fracture Mechanics | 2017 | 39 |
| 35 | INSTABILITY OF A BOGIE MOVING ON A FLEXIBLY SUPPORTED TIMOSHENKO BEAM | Journal of Sound and Vibration | 2002 | 38 |
| 36 | Elastic–plastic constraint parameter A for test specimens with thickness variation | Fatigue and Fracture of Engineering Materials and Structures | 2016 | 38 |
| 37 | A Modeling Method of Continuous Fiber Paths for Additive Manufacturing (3D Printing) of Variable Stiffness Composite Structures | Applied Composite Materials | 2020 | 35 |
| 38 | Inverse and forward kinematics and workspace analysis of a novel 5-DOF (3T2R) parallel–serial (hybrid) manipulator | International Journal of Advanced Robotic Systems | 2021 | 34 |
| 39 | Acoustic identification of nanocrystalline media | Journal of Sound and Vibration | 2009 | 33 |
| 40 | Enhanced dislocation emission from grain boundaries in nanocrystalline materials | Scripta Materialia | 2012 | 33 |
| 41 | Phenomenon of skin effect in metals due to hydrogen absorption | Continuum Mechanics and Thermodynamics | 2019 | 33 |
| 42 | The effect of out-of-plane constraint in terms of the T-stress in connection with specimen thickness | Theoretical and Applied Fracture Mechanics | 2015 | 32 |
| 43 | Mechanical and energy absorption behaviors of 3D printed continuous carbon/Kevlar hybrid thread reinforced PLA composites | Composite Structures | 2023 | 32 |
| 44 | Impact of chaotic dynamics on the performance of metaheuristic optimization algorithms: An experimental analysis | Information Sciences | 2022 | 31 |
| 45 | Chemical affinity tensor and chemical reaction front propagation: theory and FE-simulations | International Journal of Fracture | 2016 | 29 |
| 46 | Fracture of saturated concrete and rocks under dynamic loading | Engineering Fracture Mechanics | 2020 | 29 |
| 47 | On one Model of Generalized Continuum and its Thermodynamical Interpretation | Advanced Structured Materials | 2011 | 29 |
| 48 | Technological Capabilities of Vacuum Arc Plasma Sources | Vakuum in Forschung Und Praxis | 2014 | 28 |
| 49 | Residual stress determination by optical interferometric measurements of hole diameter increments | Optics and Lasers in Engineering | 2018 | 28 |
| 50 | A Perturbation Solution for a Nonthermal Equilibrium Fluid Flow Through a Three-Dimensional Sensible Heat Storage Packed Bed | Journal of Heat Transfer | 1996 | 27 |
