| 1 | Rheological and flow characteristics of nanofluids: Influence of electroviscous effects and particle agglomeration | Journal of Applied Physics | 2009 | 220 |
| 2 | Mechanism of enhancement/deterioration of boiling heat transfer using stable nanoparticle suspensions over vertical tubes | Journal of Applied Physics | 2007 | 127 |
| 3 | Material characterization of the encapsulation of an ultrasound contrast microbubble and its subharmonic response: Strain-softening interfacial elasticity model | Journal of the Acoustical Society of America | 2010 | 102 |
| 4 | Linear smoothed polygonal and polyhedral finite elements | International Journal for Numerical Methods in Engineering | 2017 | 84 |
| 5 | Enhancing strength, ductility and machinability of a Al–Si cast alloy by friction stir processing | Journal of Manufacturing Processes | 2015 | 77 |
| 6 | Outlier analysis for defect detection using sparse sampling in guided wave structural health monitoring | Structural Control and Health Monitoring | 2021 | 76 |
| 7 | A phase reconstruction algorithm for Lamb wave based structural health monitoring of anisotropic multilayered composite plates | Journal of the Acoustical Society of America | 2006 | 62 |
| 8 | Numerical Investigation of Micro-channel based Active Module Cooling for Solar CPV System | Energy Procedia | 2014 | 61 |
| 9 | Development of wear maps of in-situ TiC+TiB2 reinforced AZ91 Mg matrix composite with varying microstructural conditions | Tribology International | 2019 | 48 |
| 10 | Response Surface Modelling of Micro Holes in Electrochemical Discharge Machining Process | Procedia Engineering | 2013 | 47 |
| 11 | Reynolds number dependence of plane jet development in the transitional regime | Physics of Fluids | 2008 | 45 |
| 12 | Evaporation-induced flow around a pendant droplet and its influence on evaporation | Physics of Fluids | 2015 | 45 |
| 13 | Double-diffusive natural convection in a fluid saturated porous cavity with a freely convecting wall | International Communications in Heat and Mass Transfer | 1997 | 44 |
| 14 | Magnetostriction and anisotropy compensation in TbxDy0.9−xNd0.1Fe1.93 [0.2≤x≤0.4] | Applied Physics Letters | 2010 | 42 |
| 15 | Complete Vegetable Oil Fueled Dual Fuel Compression Ignition Engine | SAE technical paper series | 0 | 41 |
| 16 | Delamination Size Detection using Time of Flight of Anti-symmetric (Ao) and Mode Converted Ao mode of Guided Lamb Waves | Journal of Intelligent Material Systems and Structures | 2010 | 41 |
| 17 | Fatigue damage characterization using surface acoustic wave nonlinearity in aluminum alloy AA7175-T7351 | Journal of Applied Physics | 2008 | 40 |
| 18 | Light‐Driven Continual Oscillatory Rocking of a Polymer Film | ChemistryOpen | 2020 | 36 |
| 19 | Simultaneous moduli measurement of elastic materials at elevated temperatures using an ultrasonic waveguide method | Review of Scientific Instruments | 2015 | 35 |
| 20 | Capillary flow of blood in a microchannel with differential wetting for blood plasma separation and on-chip glucose detection | Biomicrofluidics | 2016 | 35 |
| 21 | Non-Darcy double-diffusive natural convection in axisymmetric fluid saturated porous cavities | Heat and Mass Transfer | 1997 | 32 |
| 22 | Influence of annealing on stain hardening behaviour and fracture properties of a cryorolled Al 2014 alloy | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2015 | 31 |
| 23 | Thermodynamic analysis of high-ash coal-fired power plant with carbon dioxide capture | International Journal of Energy Research | 2013 | 30 |
| 24 | Graphene‐Functionalized Carbon Nanotubes for Conducting Polymer Nanocomposites and Their Improved Strain Sensing Properties | Macromolecular Chemistry and Physics | 2013 | 29 |
| 25 | Re-configurable multi-level temperature sensing by ultrasonic “spring-like” helical waveguide | Journal of Applied Physics | 2016 | 29 |
| 26 | Wear characteristics of injection-moulded unfilled and glass-filled nylon 6 spur gears | Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology | 2004 | 28 |
| 27 | Evaluation of Process Parameters of ECDM Using Grey Relational Analysis | | 2014 | 28 |
| 28 | Optimization of convective fin systems: a holistic approach | Heat and Mass Transfer | 2002 | 27 |
| 29 | Probing nanoantenna-directed photothermal destruction of tumors using noninvasive laser irradiation | Applied Physics Letters | 2009 | 26 |
| 30 | An Approach for Estimation of Ignition Delay in a Dual Fuel Engine | SAE technical paper series | 0 | 25 |
| 31 | A fully smoothed XFEM for analysis of axisymmetric problems with weak discontinuities | International Journal for Numerical Methods in Engineering | 2017 | 25 |
| 32 | Analysis of a bubble absorber working with R22 and five organic absorbents | Heat and Mass Transfer | 1997 | 24 |
| 33 | Protocol for measuring permeability and form coefficient of porous media | Physics of Fluids | 2005 | 24 |
| 34 | Effect of impingement surface roughness on the noise from impinging jets | Physics of Fluids | 2014 | 24 |
| 35 | Machining performance of toughened zirconia ceramic and cold compact alumina ceramic in ultrasonic drilling | Journal of Mechanical Working Technology | 1989 | 22 |
| 36 | Study of damage mechanisms and failure analysis of sintered and hardened steels under rolling–sliding contact conditions | Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing | 2007 | 21 |
| 37 | Torsional mode ultrasonic helical waveguide sensor for re-configurable temperature measurement | AIP Advances | 2016 | 21 |
| 38 | A numerical study of evaporation characteristics of spherical n-dodecane droplets in high pressure nitrogen environment | Physics of Fluids | 2011 | 20 |
| 39 | Role of shear induced diffusion in acoustophoretic focusing of dense suspensions | Applied Physics Letters | 2016 | 20 |
| 40 | Fabrication of a Waterborne Durable Superhydrophobic Material Functioning in Air and under Oil | Advanced Materials Interfaces | 2018 | 20 |
| 41 | Role of initial conditions on noise from underexpanded pipe jets | Physics of Fluids | 2009 | 19 |
| 42 | Bio‐heat transfer simulation of retinal laser irradiation | International Journal for Numerical Methods in Biomedical Engineering | 2012 | 19 |
| 43 | Development of a magetnetostrictive transducer for nondestructive testing of concrete structures | Applied Physics Letters | 2008 | 17 |
| 44 | Multiway continuous hidden Markov model‐based approach for fault detection and diagnosis | AICHE Journal | 2014 | 17 |
| 45 | Multiple temperature sensors embedded in an ultrasonic “spiral-like” waveguide | AIP Advances | 2017 | 17 |
| 46 | Performance, combustion and emission characteristics of a spark-ignition engine with simultaneous injection of n-butanol and gasoline in comparison to blended butanol and gasoline | International Journal of Energy Research | 2014 | 16 |
| 47 | Mathematical modeling of gasification of high-ash Indian coals in moving bed gasification system | International Journal of Energy Research | 2014 | 16 |
| 48 | Elastocapillary powered manipulation of liquid plug in microchannels | Applied Physics Letters | 2015 | 16 |
| 49 | Issues on the pulse-width dependence and the shape of acoustic radiation induced static displacement pulses in solids | Journal of Applied Physics | 2009 | 15 |
| 50 | Damage identification using combined transient power flow balance and acceleration matching technique | Structural Control and Health Monitoring | 2014 | 15 |
